Broadband Amplifier features modular design.
BBA100 has modular design that allows users to select frequency range and output power to suit their requirements, and built-in expansion capability allows amplifier modules to be replaced easily. Device features 3 frequency bands, each with configurable interlock circuit, that cover range from 9 kHz to 1 GHz and provide power up to 500 W. Integrated system controller controls frequency bands,...Read More »
Video Filter Amplifier offers short-to-battery protection.
Designed to withstand harsh operating conditions in automotive applications, MAX9532 drives standard-definition video connections to in-dash or rear-seat automotive display. Unit integrates short-to-battery protection up to 18 V on video output, eliminating need for external series resistor. Operating from 2.7-3.6 V supply, amplifier employs DirectDrive-® technology, which automatically removes...Read More »
Amplifier suits automotive entry/tire pressure monitoring.
Operating in 315 and 433 MHz bands, MAX2634 is designed for remote keyless entry and tire pressure monitoring applications. It consumes 2.5 mA of supply current and eshibits 1.25 dB noise. Logic-enabled shutdown reduces supply current to under 1 -µA. Contained in 2.0 x 2.2 mm, 6-pin SC70 package, amplifier operates from 2.2-5.5 V supply and is specified over -40 to +125-Read More »
WLAN Power Amplifier offers optimized linear output power.
Supplied in 3 x 3 mm QFN package, 2.4 GHz SST12CP11 is manufactured using InGaP/GaAs HBT technology and supports operating voltage up to 5 V. Three-stage device achieves 34 dB power gain as well as 26 and 25 dBm linear output power at 3.5% and 2.5% EVM, respectively, at 5.0 V bias with less than 470 mA current consumption. This helps increase transmission range and data rate of WiFi (802.11b/g/n)...Read More »
Inventory Management Services
This white paper provides an overview into the benefits, approaches and considerations for inventory management services.Read More »
Power Upstream Amplifier meets DOCSIS® 3.0 requirements.
Model MAX3518 CATV amplifier dissipates 1.25 W when configured for 31 dB of gain and +64 dBm VOUT. It also consumes 25 mW in transmit-disabled mode while acheiving 10 dB noise and 60 dBc of harmonic distortion. Operating from 5.0 V supply that connects to single pin on device, it is specified over -40 to +85-Read More »
Chopper Stabilized Op Amp prolongs battery life.
Suitable for portable and battery-powered instruments, dual-channel Model ADA4051-2 features Auto-Correction Feedback Loop ripple-suppression technology to provide low offset voltage of 2-15 -µV. Rail-to-rail I/O helps provide dynamic range greater than 110 dB, while chopper architecture enables device to achieve PSRR and CMRR of 135 dB. Operating from 1.8-5.5 V single power supply, zero-drift...Read More »
Dual Ultra-Low-Noise Amplifier features selectable gain.
Available with active impedance matching, Model AD8432 is suited for high channel count communications and medical applications that require up to 200 MHz of bandwidth. Single-ended-input amplifier operates on single 5 V supply and provides differential output optimized to drive I/Q demodulators and phase shifters. Housed in 4 x 4 mm package, amplifier operates from -40 to +85-Read More »
Op Amps combine performance, and low-power operation.
Operating from 6-38 V supply, MAX9943 (single) and MAX9944 (dual) op amps consume 550 -µA quiescent current per amplifier. They have 100 -µV max input-offset voltage as well as 0.4 -µV/-Read More »
Op Amp consumes 552 nW with operation down to 1.6 V.
Featuring supply voltage of 1.6-5.5 V and max supply current of 0.4 -µA, PowerWise LPV521 extends battery life in portable equipment including wireless remote sensors, power-line monitoring, and micropower oxygen and gas sensors. Wide-input common-mode voltage range accepts input signals 100 mV beyond each rail, enabling direct connection to several sensor types. Housed in 5-pin SC-70 package,...Read More »
WLAN Power Amplifier offers ultra-high linear output power.
Housed in 3 x 3 mm QFN package, 3-stage 2.4 GHz Model SST12CP11 achieves 34 dB power gain, 26 dBm and 25 dBm linear output power at 3.5% and 2.5% EVM, respectively, at 5.0 V bias with less than 470 mA current consumption. Device is 802.11b/g spectrum mask compliant up to 29 dBm for added performance. Manufactured using InGaP/GaAs HBT technology, amplifier helps optimize transmission range and...Read More »
Material Handling Solutions from Global Leader in Rubber & Urethane Power Transmission
Megadyne's QST polyurethane timing belts take up less space and guarantee a lower noise level than chain and other traditional material handling belts. Check out our video to learn more.Read More »