New Current-sense Amplifier and Comparators Enables to Design Small Systems While Maintaining High Performance
INA185 enables the use of lower-value shunt resistors to cut system power consumption. TLV4021 and TLV4041 comparators monitor voltages as low as 0.2-V internal reference. Features threshold accuracy of 1% across full temperature range from -40°C to +125°C.
Read More »
VadaTech Presents VPX981 Optical Amplifier/Splitter Module That Features Blind-Mate Optical Interconnect
Designed for use in 6U OpenVPX platforms that require signal distribution over fiber. Offers power matching outputs between ±1 dB and optical I/O over single mode 1551 nm fibers. Suitable for embedded computing, radar and electronic systems.
Read More »
New WBA0180210A Features 1.25:1 VSWR and 50 Ohm Impedance
Provides 0.27 dB noise figure with 27 dB of gain and +10 dBm P1dB at 12V DC operation. Available in a standard SMA-connectorized gold plated package. Features +/-0.10 dB gain flatness and +23.0 dBm output IP3.
Read More »
New Input-Protected Low-Noise Amplifiers Operate with Bias Voltage of +12V Typical Over Temperature Range of -40 to +85 degree C
Consists of 12 different models that cover a broad range of frequency bands from 10 MHz to 3.5 GHz. Includes low noise figure levels from 0.8 to 1.6 dB, high-small signal gain ranging from 25 to 40 dB and low VSWR levels from 1.3:1 to 1.5:1. Ideal for radar systems, EW applications, military/microwave radios, wireless and satellite communications and test instrumentation.
Read More »
Embedded Systems and Security: Security-First Mindset Drives Both Performance and Profits
To learn more about developing a long term strategy for protecting your systems, download now.
Read More »
New Cobalt Digital 9914DA Series Distribution Amplifiers Controlled with Remote Control Panels
9914DA-4x16-XPT-12G provides the advantage of its flexible crosspoint routing for 4K and 8K signals. Provides four input channels that can be crosspoint-routed to 16 DA outputs. Quad-input capacity supports 8K quad-link content over 12G-SDI interfaces.
Read More »New MMA053AA Amplifier Features Compact Die Size of 3 mm X 2.25 mm X 0.07 mm and Internally Matched I/Os to 50 Ohm
Gain flatness over the DC to 8 GHz frequency range varies by only ±0.5 dB. Provides 17 dB of gain, +43 dBm output IP3 and +31 dBm of output power at 3 dB compression, while requiring only 410 mA from an 11 V supply. Ideal for EW, ECM, radar and test equipment applications.
Read More »
Empower RF Releases Model 1219 Solid State GaN Module with Mating Connector/Pigtail
Utilizes a 50V GaN on SiC transistors with low leakage currents and high thermal conductivity. Features discrete and digital RS485 interfaces for controlling and monitoring of gain adjustment, temperature and alarm. Suitable for applications such as broadband mobile communications, jamming and product test applications.
Read More »
LG Introduces New Smartphone Audio Technology that Uses Phone's OLED Display as an Audio Amplifier
CSO repurposes the OLED display as a speaker vibrating the entire surface to produce sound with impressive volume and range. Improves clarity making voices to discern and subtle musical notes more noticeable. Full-bodied stereo performance is possible with a 2-channel setup, sending audio out of the bottom speaker and through the top third of the display.
Read More »
PI Introduces Model E-619 Piezo Amplifier for Driving High-Capacitance Multilayer Piezo Actuators
Offered with 9.5 and 19 in. racks for 1 to 3 channels piezo driver modules. Delivers sink/source currents up to 10 A and output voltage swing of 160 V-pp. Suitable for operating fast switches, valves, micromachining and micro-dispensing equipment.
Read More »
High-power Piezo Amplifier E-619 1200W Designed to Drive High-capacitance Multilayer Piezo Actuators
Comes in two standard versions with a maximum bandwidth of 20kHz and 3kHz. Delivers up to 1200 watts of peak power, provides current up to 10amps and output voltage -30V to +130V. Temperature sensor input provides overheating protection of piezo actuators.
Read More »
Locon Sensors Withstand Extreme Temperatures
Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.
Read More »
