Electronic Amplifiers

Stereo Line Driver promotes optimal audio performance.
Electronic Amplifiers

Stereo Line Driver promotes optimal audio performance.

Supplied in 14-pin SOIC package and powered by single 3.3 V supply, WM3100 delivers delivers 108 dB SNR and -95 dB THD+N as well as dedicated pins to control mute and output modes. Stereo output amplifiers drive variety of audio loads, and integrated charge pump generates negative supply for ground-referenced stereo 2 Vrms outputs. Other features include stereo differential inputs and support for...

Read More »
Electronic Amplifiers

Low-Noise Op Amps improve harsh environment signal conditioning.

Specified for -40 to +125°C operation, MAX9632/MAX9633 are 36 V, rail-to-rail operation amplifiers (op amps) that target industrial DAQ applications requiring precision signal conditioning at low frequencies. Single MAX9632 and dual MAX9633 respectively offer 0.94 and 3 nV/rt-Hz input voltage noise density, 125 and 200 Â-µV max offset, and 0.5 and 0.9 µV/°C max offset...

Read More »
Current Sense Amplifier operates from -5 to 80 V.
Electronic Amplifiers

Current Sense Amplifier operates from -5 to 80 V.

Featuring 2 MHz bandwidth, Model LT1999 monitors currents in H-bridge motor controls, switching power supplies, and battery chargers. Bidirectional unit guarantees more than 80 dB common-mode rejection at 100 kHz, and features buffered output with fixed-gain options for 10, 20, and 50 V/V. Gain error is less than 0.5% and input offset voltage is less than 1.5 mV over full temperature range of -40...

Read More »
Electronic Amplifiers

Classroom Audio System uses single microphone.

Suited for K-12 classroom settings, WX-LAK12 Amplifier/Receiver works with WX-LT350 IR wireless pendant microphone, which is designed with panic button that allows teacher to alert administration in case of incident and turns classroom document camera into video surveillance camera. Single-channel WX-LAK12 includes 20 W amplifier, 2 line inputs, and 4 speaker connections as well as volume control...

Read More »
Dimmer Switch and PWM Injector offer limitless watt output.
Electronic Amplifiers

Dimmer Switch and PWM Injector offer limitless watt output.

Working in conjunction with 60 W 12 V indoor/outdoor driver, Reign 12 V LED Dimmer Switch offers smooth, 0-100% dimming range and does not flicker, hum, or jump. Unit is available in full, rocker, and button slide styles and fits into standard wall light boxes. To increase output, PWM Injector connects to new power supply and output circuit of dimmer, driving additional 60 W. PWM signal is...

Read More »
Electronic Amplifiers

Transceiver/TIA Chipset fosters 10G EPON FTTx deployments.

Respectively supplied in bare-die format and 5 x 5 mm QFN package, GN7068 transimpedance amplifier (TIA) and GN7355 transceiver chip comprise 10G EPON (Ethernet Passive Optical Network) chipset that targets equipment serving FTTx installations. SiGe BiCMOS TIA, which meets IEEE 802.3av and ITU G.987.2 standards for 10G PON, is combined with GN7355 single-chip transceiver that features burst-mode,...

Read More »
Electronic Amplifiers

ViaSat to Deliver UHF DAMA Network Control Stations for NATO

Sets stage for future Integrated Waveform (IW) upgrades for NATO and other international UHF satcom customers CARLSBAD, Calif. -- ViaSat Inc. (Nasdaq: VSAT) has received a $14 million award from NATO for turnkey integration and installation of three UHF Demand Assigned Multiple Access (DAMA) Network Control Stations (NCS). Two fixed NCS sites will be installed to set up satellite communication...

Read More »
Electronic Amplifiers

High-Bandwidth RF Amplifier suits FTTH systems.

Supporting operation to 1 GHz, ACA2604 RF amplifier is designed to optimized data delivery over FTTH and RF-over-Glass (RFoG) systems. Unit forms optical to electrical interface and is driven by forward path photodiode in fiber optic RF receiver. Operating from +5 volt supply, 5 x 5 x 1 mm SMT product offers operating frequency from 50-1,000 MHz, with input noise of 4.5 pA/rtHz and 22 dB gain...

Read More »
Electronic Amplifiers

RFMD® to Showcase Portfolio of Industry-Leading Wired Broadband Components at SCTE Cable-Tec Expo 2010

Company Also Announces Availability of 2010 Wired Broadband Product Selection Guide GREENSBORO, N.C. - RF Micro Devices, Inc. (Nasdaq:RFMD), a global leader in the design and manufacture of high-performance radio frequency components and compound semiconductor technologies, announced today the Company will showcase its portfolio of industry-leading wired broadband components at the SCTE Cable-Tec...

Read More »
Electronic Amplifiers

Micropower Op-Amps extend battery life in portable devices.

ISL28233 and ISL28433 are dual and quad micropower, chopper stabilized op-amps optimized for single and dual supply operation from 1.65-6.0 V and ±0.825 to ±3.0 V. Quiescent current draw of 18 Â-µA suits handheld devices that operate off 2 AA or single Li-ion batteries. Featuring rail-to-rail inputs and output, products operate over -40 to +125°C range and offer 6...

Read More »

All Topics