Electronic Amplifiers

Electronic Amplifiers

EEG Wireless Amplifier helps diagnose neurological diseases.

Consolidating variety of clinical and research features into single, portable unit, Nicolet(TM) EEG Wireless Amplifier captures high-resolution brain wave data for diagnosis and treatment of epilepsy, brain trauma, stroke, brain tumors, and sleep dysfunction. Real-time data from amplifier can be transferred wirelessly or in tethered mode and stored in on-board memory, allowing for continuous...

Read More »
Electronic Amplifiers

4G Power Amplifier optimizes 2.5-2.7 GHz performance.

Engineered to deliver optimal range and throughput, AWM6268 comes in 4 x 4 x 1 mm package with integrated step attenuator as well as RF input and output impedance matching circuits. Solution meets UTRA adjacent channel power limits at +28 dBm output power and offers 33% power added efficiency at +28 dBm LTE output power. PA also meets WiMAX Spectrum Emissions Mask limits at +26 dBm output power...

Read More »
RF Wireless Modules target mobile phone applications.
Electronic Amplifiers

RF Wireless Modules target mobile phone applications.

Comprising SAW filter, power amplifier, and magnetic stabilizer in single 6.6 x 3.8 x 1.0 mm package, HFQPRAPCA Series supports Bands 5, 1, 25, and 13. Magnetic stabilizer, providing same function as isolator, enables modules to remain stable by controlling characteristics of load fluctuation caused by changes in impedance that can occur when user's hand, metal object, or other materials come...

Read More »
Electronic Amplifiers

Current-Sense Amplifiers offer tightest offset, low power draw.

Supplied in 5-pin SOT23 package, TS1100 has +1.6 to +25 V input common-mode voltage range, 30 Â-µV tight offset, and 1 µA supply current rating. There are 4 gain options available - 25, 50, 100, and 200 V/V - to accommodate application requirements, and gain error is less than 0.5% (max). Suited for low-current, high-side current-sensing amplification, product is specified for...

Read More »
RF Power Amplifier covers 10 kHz to 225 MHz frequency range.
Electronic Amplifiers

RF Power Amplifier covers 10 kHz to 225 MHz frequency range.

Featuring air-cooled, solid-state design, 600 W Model 600A225 is equipped with digital control panel that provides both local and remote control using IEEE, RS-232, USB, and Ethernet interfaces. Panel features 3.75 in. diagonal graphic display, menu-assigned softkeys, and single rotary knob as well as 4 dedicated switches for extensive control and status reporting capabilities. Typical...

Read More »
Richardson RFPD Delivers Outstanding High-Linearity Driver Amplifiers for Wireless Infrastructure, Aerospace & Defense
Electronic Amplifiers

Richardson RFPD Delivers Outstanding High-Linearity Driver Amplifiers for Wireless Infrastructure, Aerospace & Defense

TriQuint Semiconductor Introduces High-Efficiency TQP7M9101 (1/4W), TQP7M9102 (1/2W), TQP7M9103 (1W) and TQP7M9104 (2W) Driver Amplifiers LaFox, Illinois: Richardson RFPD, Inc. announces immediate availability of four new high-linearity driver amplifiers from TriQuint Semiconductor. These InGaP / GaAs HBT semiconductor devices deliver high performance across a broad range of frequencies. The...

Read More »
Electronic Amplifiers

GaN-Based Differential Amplifiers meet demands of CATV networks.

SMT power doubler, RFCM2680, is capable of delivering +61 dBmV output, while RFPP2870 push-pull amp features high gain 28 dB (min at 1,003 MHz). Functioning as Edge QAM amp or push-pull amp with +46 dBmV output, RFAM2790 meets DOCSIS 3.0 specifications with 7 dB margin and has inner-stage attenuator that provides 8-28 dB gain. Push-pull amp RFCA8818, optimized for CATV line driver stages, has 2...

Read More »
High-Voltage Linear Amplifier delivers ±50 kV performance.
Electronic Amplifiers

High-Voltage Linear Amplifier delivers ±50 kV performance.

Featuring all solid state design, Model 50/12 provides precise control of output voltages in range of 0 to ±50 kVdc or up to 100 kVac peak-to-peak with output current of 0 to ±12 mAdc or peak ac. Slew rate is greater than 350 V/Â-µs and signal bandwidth (-3 dB) is dc to greater than 20 kHz. With less than 10 Vrms noise, bipolar amplifier is suited for dielectric studies,...

Read More »
Electronic Amplifiers

ADC Drivers offer single- and dual-channel versions.

With power consumption of 1 mA per channel, OPAx836 Series provides 205 MHz of bandwidth for driving low-power SAR and delta-sigma ADCs. Units feature slew rate of 560 V/Â-µs, THD of 130 dBc, and 4.6 nV/rtHz noise, with typical input-offset voltage of 0.065 µV and 1.1 mV/°C drift for accurate measurement. Available in 2 x 2 mm WQFN package with integrated gain setting...

Read More »
Electronic Amplifiers

Custom MMIC Design Services, Inc. Wins a 2011 Army Achievement Award

Westford, MA-Custom MMIC Design Services, Inc. (CMDS) was awarded a 2011 Army Achievement Award in recognition of its innovative work on high efficiency, low power, low noise MMIC amplifiers for SATCOM applications. Paul Blount, President and CEO of CMDS, accepted the award on behalf of the company at a ceremony at the Pentagon in Arlington, VA. We are very honored to win this award," said Mr....

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics