Electronic Amplifiers

Electronic Amplifiers

Micro Radio Transceiver delivers scalable output power.

Intended for small-cell and macro-cell active antennas, Micro Radio Transceiver provides output power from 0.8-6.4 W by parallel use of P-Chips. Each P-Chip Doherty MMIC power amplifier delivers more than 39 dBm peak output power. Based on micro radio, uB700 Active Antenna System supports 4G in 700 MHz digital dividend band for broadband mobile networks, while uB900 supports GSM, UMTS, and LTE in...

Read More »
Richardson RFPD Introduces Pair of inGaP HBT Amplifiers from Freescale
Electronic Amplifiers

Richardson RFPD Introduces Pair of inGaP HBT Amplifiers from Freescale

High Efficiency/Linearity Devices Ideally Suited for Small Cell Applications LaFox, Illinois: Richardson RFPD, Inc. today announces immediate availability and full design support capabilities for a pair of new InGaP HBT amplifiers from Freescale Semiconductor, Inc. The two linear power amplifiers are the latest additions to Freescale's extensive range of GaAs MMICs optimized for wireless...

Read More »
FSR to Launch Enhanced High-Resolution 1 X 2 Computer Distribution
Electronic Amplifiers

FSR to Launch Enhanced High-Resolution 1 X 2 Computer Distribution

Power Saver Feature Dramatically Reduces Consumption Woodland Park, NJ - At InfoComm 2012 FSR, manufacturer of audio and video switching, control products, and connectivity boxes, will introduce enhanced versions of their high-resolution 1 X 2 computer distribution amplifiers that maintain excellent signal integrity while dramatically reducing power consumption. The new CDA-2EQG and CDA-2EQGA,...

Read More »
Electronic Amplifiers

Wilson Electronics Announces Five-Band 4G/3G Indoor Cellular Signal Booster

New AG Pro-Quint booster amplifies signals on AT&T, Verizon and T-Mobile 4G networks, and on all carriers 3G networks. NEW ORLEANS - Wilson Electronics (www.WilsonElectronics.com), manufacturer of North America's top-selling line of cellular signal boosters, announced at International CTIA Wireless 2012 the company's most advanced indoor booster for 4G and 3G networks. The new AG Pro-Quint will...

Read More »
Electronic Amplifiers

ANADIGICS Powers NEC MEDIAS

New NEC MEDIAS Smartphone is Powered by ANADIGICS' HELP(TM)4 Power Amplifier WARREN, N.J. - ANADIGICS, Inc. (Nasdaq: ANAD), a world leader in radio frequency (RF) solutions, today announced that the Company is shipping production volumes of its AWT6621 fourth generation High-Efficiency-at-Low-Power (HELP(TM)4) power amplifiers (PAs) to NEC CASIO Mobile Communications for the new MEDIAS IS11N. The...

Read More »
Electronic Amplifiers

Wilson Electronics Adds to Industry-Leading Line of 4G Mobile Cellular Signal Boosters

New Sleek 4G-A booster amplifies voice and data communications on 2G & 3G networks, as well as AT&T's 4G LTE NEW ORLEANS - ShowStoppers @ CTIA Wireless 2012- Wilson Electronics (www.WilsonElectronics.com), manufacturer of North America's top-selling line of cellular signal boosters, announced at International CTIA Wireless 2012 the company's latest product in the world's first line of 4G mobile...

Read More »
Ultrafast Power Amp, IR OPO are designed for stability.
Electronic Amplifiers

Ultrafast Power Amp, IR OPO are designed for stability.

Designed for stability, Spitfire® Ace(TM) Power Amplifier delivers 12+ W output at 5/10 kHz and 10+ W at 1 kHz repetition rate. Beam quality, with XP cavity, provides M2 less than 1.45 even at highest energy configuration. Also available, Inspire IR OPO, fully automated IR ultrafast optical parametric oscillator (OPO), tunes gap-free from 1,000-1,600 nm with high power and short pulse...

Read More »
Electronic Amplifiers

MMIC Amplifier features low noise figure of 0.8 dB typical.

Packaged in 2 x 2 mm case, PMA2-252LN+ is adaptable microwave amplifier designed for 1.5-2.5 GHz receiver applications, from LTE and satellite base stations to GPS and air navigation. It is powered by single 3-4 Vdc supply and features low noise figure of 0.8 dB typical and high IP3 of up to 32 dBm. Packaged in 2 x 2 mm case, amplifier can handle RF input power up to +25 dBm without requiring...

Read More »
Electronic Amplifiers

Self-Containted Cellular Amplifier operates in 5 bands.

SureCall® Force-5 is self-contained, 5 band cellular amplifier for Verizon and AT&T LTE, T-Mobile AWS, and dual-band for 2G/3G/4G. It is designed for organizations with between 20,000-100,000 sq ft requiring consistent cellular connection for voice and data. It features adjustable dB gain, automatic oscillation detection and shutdown to prevent interference with cell phone towers. Amplifier...

Read More »
Electronic Amplifiers

Nitronex Awarded Phase I SBIR from Nasa to Research X- and Ka- Band GaN Power Amplifiers

Nitronex wins additional X/Ka-Band funding DURHAM, NC - Nitronex, a leader in the design and manufacture of gallium nitride (GaN) based RF solutions for high performance applications in the defense, communications, cable TV, and industrial & scientific markets, has been awarded a Phase I SBIR to develop a highly efficient 20W X-band GaN power amplifier MMIC for use in long range RF...

Read More »

All Topics