Electronic Amplifiers

AR Modular RF's KMW2030 Amplifier System for Tactical Radios Receives Additional JITC Certification
Electronic Amplifiers

AR Modular RF's KMW2030 Amplifier System for Tactical Radios Receives Additional JITC Certification

Bothell, WA - AR Modular RF has received JITC certification for its KMW2030 tactical radio amplifier system (30 MHz - 512 MHz / 125 watts) when used with the Harris PRC-117G tactical radio. It has been previously certified for use with the PRC 117F and the PSC-5D. The KMW2030 was tested along with its associated Low Noise SATCOM pre-amp, the KMW2030P. This auto-band switching AM/FM-UHF/VHF DAMA...

Read More »
Push Pull Amplifier operates from 50-1,000 MHz with low noise.
Electronic Amplifiers

Push Pull Amplifier operates from 50-1,000 MHz with low noise.

Designed for integration in 75 W push-pull circuit, Model MAAM-010144 is suited for CATV, FTTX, DBX, and HDTV applications. MMIC design is configured as pair of cascode MESFET amplifiers for optimal broadband performance. Housed in TSSOP 16-lead exposed paddle package, device provides 20.5 dB gain and +8 Vdc bias with gain flatness of 0.6 dB and low noise figure of 5.5 dB. Input return loss is 18...

Read More »
Electronic Amplifiers

Wireless Load Cell Amplifier offers 150 ft range.

Connecting directly to standard strain gage load cell, pressure transducer, or torque transducer, MasterLink 3000 transmits readings from device to handheld display, analog output, or USB interface. Unit features spectrum analyzer that allows user to determine optimal channel selection. Providing up to 40 hours of operation on rechargeable battery, MasterLink 3000 can monitor signal health and...

Read More »
Electronic Amplifiers

Class-D Audio Amplifiers increase performance, lower power draw.

Supplied in 10 x 6 mm, 32-pin HTSSOP, TPA3116D2/TPA3118D2/TPA3130D2 analog-input class-D stereo amplifiers are intended for use in soundbars, after-market automotive solutions, portable audio docks, and LCD TVs. Programmable switching rates of 400 KHz to 1.2 MHz and supply range of 4.5-26 V lend to audio output optimized for quality and efficiency. Each model has closed-loop design, and FETs...

Read More »
Electronic Amplifiers

M/A-COM Technology Solutions Extends Leadership in System Solutions with New 42GHz SMARTSET Chipset

Chipset Offers an Integrated and Cost Effective Solution for OEM Customers Montreal, QC, - M/A-COM Technology Solutions Inc. (M/A-COM Tech), a leading supplier of high performance analog semiconductor solutions, introduced today at the International Microwave Symposium (IMS/MTT-S) Trade Show, in Montreal, Canada, a 42GHz SMARTSET Chipset for point-to-point radio applications. Using a...

Read More »
LNA GaAs MMICs feature single voltage of +3.0 V at 52 mA.
Electronic Amplifiers

LNA GaAs MMICs feature single voltage of +3.0 V at 52 mA.

Suited for applications from 26-34 GHz, including 30 GHz satellite communications, Model CMD162 features typical noise figure of 1.7 dB with small-signal gain of 22 dB and output 1 dB compression point of +7 dB. Models CMD157 and CMD157P3, intended for 6-18 GHz applications, each feature noise figure of 1.5 dB, deliver greater than 25 dB of flat gain, and have corresponding output 1 dB...

Read More »
Electronic Amplifiers

WCDMA/LTE Power Amplifiers offer low- and high-power efficiency.

ProEficient(TM) WCDMA/LTE power amplifiers maximize talk time in low-power mode while allowing long-term data application use in high-power mode. Suitable for smartphones and tablet devices, units maximize 4G battery-life without use of DC-DC converter. Depending on model, amplifiers operate over frequency ranges of 880-915 MHz to 1,920-1,980 MHz, and in bands 1, 2, 3/4/9/10, 5, and 8. Products,...

Read More »
Electronic Amplifiers

Nuwaves Engineering Introduces Three New Miniaturized RF Products at the 2012 International Microwave Symposium

Montreal, Canada- NuWaves Engineering of Middletown, Ohio, an international Radio Frequency (RF) solutions company, will be unveiling three miniature, high-performance RF products at IEEE's 2012 International Microwave Symposium (IMS) including the company's first broadband low noise amplifier covering C band to X band, and two different sub-2 cubic inch solid state power amplifiers covering VHF...

Read More »
Integrated Circuits use 1.5 µA Icc max.
Electronic Amplifiers

Integrated Circuits use 1.5 µA Icc max.

Operating down to 0.65 V, Models TS12011 and TS12012 combine 0.6 V reference, 20 Â-µs analog comparator, and unity-gain stable op amp in 4 mm² package. Model TS12011 has push-pull output, while Model TS12012 has open-drain output. Both analog comparator and op amp feature rail-to-rail input stages, and analog comparator has ±7.5 µs of internal hysteresis for...

Read More »
Electronic Amplifiers

ANADIGICS to Showcase Cutting-Edge 4G Solutions at IMS2012

ANADIGICS to Exhibit June 19-21, 2012 at the International Microwave Symposium in Montreal, Canada WARREN, N.J. - ANADIGICS, Inc. (Nasdaq: ANAD), a world leader in radio frequency (RF) solutions, today announced that it will participate in the IEEE International Microwave Symposium in Montreal, Canada. ANADIGICS plans to showcase several new high performance products at the event, including LTE...

Read More »

All Topics