Electronic Amplifiers

Electronic Amplifiers

API Technologies to Showcase Variety of High Reliability Power Electronics at APEC 2013

ORLANDO, FL - API Technologies Corp. (NASDAQ:ATNY) ( API" or the "Company"), a trusted provider of RF/microwave, microelectronics, and security solutions for critical and high-reliability applications, announced today that it will showcase its diverse range of products suitable for higher power applications during the 2013 Annual Applied Power Electronics Conference & Expo (APEC). Discussions and...

Read More »
Power Amplifiers serve 13 and 15 GHz PtP radio applications.
Electronic Amplifiers

Power Amplifiers serve 13 and 15 GHz PtP radio applications.

Supplied in fully molded, 5 x 5 mm, plastic QFN package, MAAP-010516 and MAAP-010517 are comprised of 3-stage power amplifier with integrated, temperature-compensated, on-chip power detector. Both are suited for point-to-point (PtP) radios for cellular backhaul applications and feature on-chip ESD protection structures with DC bypass capacitors. Respectively, MAAP-010516/-010517 are optimized for...

Read More »
Electronic Amplifiers

Dual-Band Power Amplifier reduces PCB space requirements.

Supplied in 3 x 4 x 0.9 mm package with internal voltage regulation and integrated DC blocks on RF ports, AWT6765Â- is optimized for LTE bands 25 and 26 (814–849 MHz and 1,850–1,915 MHz) and offers efficiency ratings of 39% @ +27.2 dBm and 36% @ +16 dBm. Dual independent amplification chains optimize performance for each band, and linearity maintains stable,...

Read More »
Electronic Amplifiers

Isolated Error Amplifiers operate at less than 7 mA.

Designed for linear feedback power supplies using primary side controllers, ADuM3190 and ADuM4190 have 400 KHz bandwidth, with 0.5% typ initial accuracy at 25°C and 1% total accuracy over temperature range of -40 to +125°C. With included iCoupler®Â-  technology, amplifier eliminates current-transfer ratio of optocouplers that degrades over lifetime of devices. Combining...

Read More »
Coaxial Amplifier offers flat gain and high dynamic range.
Electronic Amplifiers

Coaxial Amplifier offers flat gain and high dynamic range.

SupportingÂ- use in various applications, ZX60-100VH+ is supplied in miniature shielded rugged case and delivers signals from 300 kHz to 100 MHz at up to 30 dBm output power. This 36 dB coaxial amplifier, operating on single +12 V supply, exhibits gain flatness of ±0.3 dB across full frequency range. RoHS-compliant, unconditionally stable amplifier, suited for use in...

Read More »
Ultra-Low Noise Amplifier features noise figure of 1.3 dB.
Electronic Amplifiers

Ultra-Low Noise Amplifier features noise figure of 1.3 dB.

Housed in 3 x 3 mm QFN plastic surface mount package, 5–11 GHz Model CMD132P3 delivers greater than 20 dB of gain across entire bandwidth, and has corresponding output 1 dB compression point of +10 dBm. RoHS-compliant device requires single supply voltage of +3.6 V at 30 mA. In addition toÂ- microwave radios and C- and X-band applications, amplifier is suitable for point-to-point radios,...

Read More »
Electronic Amplifiers

Small-Cell Power Amplifier covers frequencies from 728-768 MHz.

Leveraging InGaP-Plus™ technology, AWB7224 small-cell power amplifier (PA) provides characteristics optimized for WCDMA, HSPA, and LTE small-cell base stations operating in 728–768 MHz band. Efficiency rating of 13% minimizes power requirements and promotes flexible network power systems selection. Supplied in 7 x 7 x 1.3 mm SMT package with integrated RF matching, PA offers linearity of -47...

Read More »
Electronic Amplifiers

MMIC Power Amplifier serves high-power broadband applications.

Operating from 500 MHz to 3.0 GHz frequency range, MAAP-010168 is fully matched for input and output at 50 Ω, which eliminates need for sensitive external RF tuning components. This 10 W, 2-stage amplifier, fabricated using high-reliability pHEMT process, providesÂ- nominal gain of 24 dB with input and output return loss of 10 dB across frequency band. Features suit RF and microwave...

Read More »
Low Noise Amplifier supports X-Band applications.
Electronic Amplifiers

Low Noise Amplifier supports X-Band applications.

Housed in 3 x 3 mm PQFN surface mount package, MAAL-010528 GaAs MMIC LNA provides nominal gain of 20 dB, OIP3 linearity of 26 dBm, and mid-band noise figure supply of 1.6 dB over 8.0–12.0 GHz frequency band. Unit features self-bias architecture which requires user to apply only single positive supply. Internally matched to 50 Ω input/output, 60 mA amplifier is suited for V-Sat, radar, and...

Read More »
Scientific Lasers are optimized for stability and quality.
Electronic Amplifiers

Scientific Lasers are optimized for stability and quality.

Pumped with Millennia® eV™, Matisse®Â- tunable, single-frequency laser offers over 6.5 W of output, 60 kHz external linewidth, and near diffraction-limited TEM00 beam quality. Also available, Solstice® single-box ultrafast amplifier produces less than 50 fs pulses in kHz repetition rate regime and doubles peak power at greater than 70 GW. XP cavity...

Read More »

All Topics