Electronic Amplifiers

Custom MMIC to Debut Several New Amplifiers and I/Q Mixers at IMS
Electronic Amplifiers

Custom MMIC to Debut Several New Amplifiers and I/Q Mixers at IMS

Westford, MA – Custom MMIC, (www.CustomMMIC.com), a developer of performance-driven monolithic microwave integrated circuits (MMICs), is pleased to announce the debut of several new GaAs MMIC amplifiers and mixers in booth #1807 at the International Microwave Symposium in Seattle, WA June 4-6th. Their suite of all-positive bias amplifiers demonstrates that by eliminating the negative voltage...

Read More »
MIL-STD is Standard in KCB Booth at IMS 2013
Electronic Amplifiers

MIL-STD is Standard in KCB Booth at IMS 2013

Shirley, MA – KCB Solutions, (www.kcbsolutions.com), an ITAR and AS9100 accredited microwave design and manufacturing center, is pleased to announce a suite of MIL-STD certified products and services for the military, aerospace, and defense market. They’ll be exhibiting in booth #1610 at the International Microwave Symposium in Seattle, WA June 4-6th. Senior staff will be on-hand to answer...

Read More »
Broadband Amplifier offers positive bias.
Electronic Amplifiers

Broadband Amplifier offers positive bias.

Intended for applications from 2–20 GHz, CMD187 wideband GaAs monolithic microwave integrated circuit (MMIC) amplifier die delivers greater than 22 dB of flat gain withÂ- corresponding output 1 dB compression point of +14 dBm and noise figure of 4.5 dB at 20 GHz. All-positive bias design eliminates sequencing circuits while simplifying board layout, and use of on-chip tracking...

Read More »
Electronic Amplifiers

WiFi (802.11ac) Power Amplifiers integrate to conserve space.

Optimized for WiFi infrastructure and multimedia applications, 802.11ac PAs leverage InGaP-Plus™ technology and featureÂ- integration that reduces external component requirements and conserves PCB space. Model AWL5905 offers 29 dB gain and is optimized for 5 GHz WLAN standards, including 802.11a/n/ac. Supplied in 4 x 4 x 0.8 mm SMT package, this WiFi PA integrates detector...

Read More »
Power Amplifier Modules include S- and C-band versions.
Electronic Amplifiers

Power Amplifier Modules include S- and C-band versions.

Based on Gallium Nitride (GaN) technology, NuPower™ S-Â- and C-band PA modules come in ruggedized packages and exhibit typical efficiencies from 20%–40%. Solid-state PAs accept nominal 0 dBm input and deliver at least 15 W of saturated power across 2,500–6,000 MHz. With 3.15 in.³ form factor, modules suit restrictions of size, weight, and...

Read More »
Electronic Amplifiers

Broadband RF Gain Blocks operate over 30 MHz to 6 GHz range.

Supplied in SOT-89 package, single-ended RF amplifiers ADL5544/ADL5545/ADL5610/ADL5611 facilitate design of communications, defense, and instrumentation systems. Class 1C (+1.5 kV ESD)-rated products integrate on-chip bias circuit andÂ- are internally matched to 50Ω at input and output. Depending on model, OIP3 values range from 34.9–38.5 dBm and P1dB noise figures range from 17.6–21.0....

Read More »
Electronic Amplifiers

Power Amplifier features slew rate greater than 900 V/µs.

Featuring all-solid-state design, Model 10/40A-HS provides output voltage of 0 to ±10 KVdc or peak AC with output current of 0 to ±40 mAdc or ±120 mA peak AC for 1 ms. Signal bandwidth ranges fromÂ- DC to greater than 23 kHz. Four-quadrant, active output stage sinks or sources current into reactive or resistive loads throughout output voltage range. Configured as...

Read More »
Low Noise Amplifier presents 2.1 dB noise figure.
Electronic Amplifiers

Low Noise Amplifier presents 2.1 dB noise figure.

Supplied in RoHS-compliant, 3 x 3 mm QFN plastic SMT package, 6–11 GHz CMD186P3Â- offers 2.1 dB noise figure, delivers >18 dB of gain, and has corresponding output 1 dB compression point of +16.5 dBm. Product requires single +5 V supply at 78 mA, and 50Ã‚Â Ω matched design does not require any external components aside from nominal bypass capacitors....

Read More »
High Voltage Amplifiers offer output up to 20 KV.
Electronic Amplifiers

High Voltage Amplifiers offer output up to 20 KV.

Available with unipolar or bipolar output at 0–10 kV, 15 kV, and 20 kV, 10HVA-20HVA Series can operate in DC, reversible, and amplifier modes. Units provide high-voltage DC to full scale waveform capability greater than 500 Hz+ output depending on loading. Amplifiers operate precision filter/divider and linear HV switch, and can both source and sink current linearly through 0 V. Performing with...

Read More »
PIN Diode operates at up to 70 GHz.
Electronic Amplifiers

PIN Diode operates at up to 70 GHz.

Fabricated using AlGaAs process which provides full passivation, Model MADP-000907-14020 is suitable for fast switching in microwave and millimeterwave frequencies. General purpose broadband amplifier features 0.025 pF capacitance at -10 V, series resistance of 7 Ω, and minimum breakdown voltage of 50 V. With package-less design and contacts that allow for standard solder reflow manufacturing,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers