CMOS Amplifiers minimize voltage noise.
Operating from 2.8-12 V, dual Model LTC6241 and quad Model LTC6242 produce low noise of 550 nVp-p in 0.1-10 Hz region. They feature 1 pA bias current and less than 125 Â-µV input offset voltage. Offset voltage drift is guaranteed under 2.5 µV/°C, while high voltage gain of 124 dB keeps system error to minimum. Gain bandwidth of 18 MHz and slew rate of 10 V/µs at supply...
Read More »
Filterless Class-D Audio Amp suits portable applications.
From 5 V supply, NCP2820 delivers up to 2.65 W of continuous average power into 4 ohm bridge-tied load (BTL). Under same conditions, output power stage can provide 1.4 W into 8 ohm BTL load with less than 1% total harmonic distortion plus noise. Product has 2.5-5.5 V input voltage range and drives clean audio output. Featuring 90% power efficiency and shutdown current of 0.42 Â-µA, unit does...
Read More »
Wideband Amplifier offers dynamic range up to 80 dB.
With DC-coupled input and rise and fall time of 5 ns, logarithmic wideband voltage amplifier, Model HLVA-100, is suited for measurement of fast and high dynamic pulses. It includes adjustable input range, trimpots, and integrated sample and hold circuit for automated baseline correction of amplifier. Switchable at amplifier or remotely, Model HLVA-100 is laid out in EMI-shielded aluminum package...
Read More »
Amplifiers offer power up to 4,000 W.
Covering 80-1,000 Mhz frequency range, 1,000 W Model 1000W1000C can have power added in 1,000 W increments up to 4,000 W by adding amplifier module and control unit. Model 4000W1000, with 4,000 W of power, includes gain control and internal RF detector that provides output for self-testing or operational modes. It employs push-pull circuitry in all high-power stages to minimize distortion, and...
Read More »
Workwear Goes Hand-In-Hand with Employee Satisfaction and Retention
High-quality gear reminds employees that they are valued by their employer and improves their workday. To find out more about choosing the best workwear, download now.
Read More »
TWT Amplifiers are offered in three 1,500 W models.
Traveling wave tube (TWT) amps provide RF power for various applications in test and measurement, research and development, and service applications. With modular construction, self-contained, forced air-cooled broadband TWT amps are equipped with front panel digital displays that show forward and reflected output. Models 1500T1G3A, 1500T2G8A, and 1500T8G18 cover respective frequency ranges of...
Read More »
Current Feedback Amplifier operates to 37 V.
High-voltage Model THS3001HV features slew rate of 6,500 V/Â-µs, 40 ns settling time, 420 MHz bandwidth, and 1.6 nV/rtHz input referred voltage noise. Housed in 8-pin, mini small-outline package with PowerPad®, unit is available in commercial temperature grade from 0-70°C and industrial temperature grade from -40 to 85°C. Applications include test and measurements,...
Read More »
Audio Power Amplifier suits flat panel displays.
Intended for 27 in. and larger displays, 20 W Class-D Model TPA3200D1 provides both digital interface and power amplifier. Device's 250 kHz switching frequency oversamples audio signal minimum of 10 times. Digital 24-bit I2S or 16-bit right-justified input connects directly to most audio processors. Housed in 44-pin TSSOP package, amplifier includes 3 integrated gain settings, thermal and...
Read More »Instrumentation Amp suits low-voltage applications.
Operating at voltages from 1.8-5.5 V, AD8553 Features offset voltage of 25 Â-µV max, offset voltage drift of 0.1 µV/°C max, and voltage noise of 0.7 µV p-p. Parasitic resistance in series with Vref pin does not degrade performance, allowing unit to attain CMRR performance of 120 dB min @ G=100 without using buffer amp to drive Vref pin. In shutdown mode, total supply...
Read More »
RF Amplifier are suited for low-power applications.
With frequency response of 4.0-10.6 GHz, Model 20S4G11 broadband solid-state amp helps satisfy need for low-power, high-frequency applications. Operating specifications include rated power output of 20 W min, flatness of +2.0 dB typ and +3.0 dB max, as well as gain, at max setting, of 43 dB min. Mismatch tolerance is rated at 100% of rated power without feedback, and harmonic distortion is -20...
Read More »Wireless Accessories facilitate enterprise networking.
EliteConnect(TM) 2.4 GHz, 500 mW PoE Amplifier, Model SMCAMP-500G increases signal strength and operating distance of 802.11b/g enterprise access points, bridges, and high-gain antennas. Suited for point-to-point and point-to-multipoint applications, EliteConnect SMCANT-OOM5P Omni-Directional Antenna provides 360° coverage at distances up to 1.5 miles. For building-to-building connections,...
Read More »
Simple Connection – MGB with EtherNet/IP
The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.
Read More »
