Electronic Amplifiers

Electronic Amplifiers

Linear Power Amplifiers target WiMAX and WiFi markets.

Available in 2 models, SZP series 2 W linear power amplifiers operate from +5 Vdc supply and feature adjustable on-chip active bias circuit. Model SZP-3026Z operates over 3.0-3.8 GHz frequency range with 12 dB of gain, while SZP-2026Z covers 2.1-2.7 GHz frequency range with over 12.5 dB gain. Both provide over +26 dBm of linear power at 2.5% EVM. Housed in surface mount SOF-26 package, they have...

Read More »
UXGA Resolution RGB Amplifier eliminates negative supply.
Electronic Amplifiers

UXGA Resolution RGB Amplifier eliminates negative supply.

Suited for single supply applications, LT6557 triple video amplifier has output swing that extends to 0.8 V of supply rails. It is capable of providing full video swing when operated from 5 V single supply. Internal biasing feature lets user program inputs of all 3 amplifiers to same dc voltage level with single resistor. Along with -3 dB bandwidth of 500 MHz, product features 2,200 V/Â-µs...

Read More »
Electronic Amplifiers

Optimizer prioritizes network traffic.

Model OGV200 Network Optimizer for Gaming and VoIP is designed to help eliminate network lag in data streams that are latency-sensitive. Built-in QoS techniques enable unit to automatically distinguish between data that is time sensitive and data that can be given lower priority. It can be setup by plugging 2 Ethernet cables into device: one originating at modem and other leading to router.

Read More »
Electronic Amplifiers

Power Amplifiers have expandable/divisible architecture.

Designed to add power instead of replacing power, Scalable Power amplifiers can be combined, divided, and controlled by central location via amplifier controller. Amplifiers can be upgraded to total of 4 like devices to be used as one unit, or separated to function independently. Controller also allows for power to be divided; when allotted amount of watts are not needed, each independent...

Read More »
Fiber Optic Sensors feature dual 4-digit display.
Electronic Amplifiers

Fiber Optic Sensors feature dual 4-digit display.

Available with NPN or PNP outputs, Accu-Vue(TM) Fiber Optic Amplifiers incorporate one-touch auto-teach, and built-in timer functions ranging from 250 Â-µsec to 20 sec. Sensor features auto power control to maintain constant light emission level over life of sensor and adjustable response times of 50 µsec. Applications include parts presence, label detection, error proofing, and...

Read More »
Electronic Amplifiers

SiGe Amplifier delivers power up to 20 dBm.

Silicon Germanium (SiGe) high linearity, medium power discrete device SGA-8543Z offers performance from 50-3500 MHz and can be biased from 2.7-3.3 V. Suited for high volume cellular, GPS, and various ISM low noise and driver amplifier applications, device is available in RoHS/WEEE compliant SOT-343 package.

Read More »
Electronic Amplifiers

Limiting Amplifier features programmable decision threshold.

Providing solution for WDM systems, SY88353BL Limiting Amplifier is suited for Gigabit Ethernet, 1X and 2X Fibre Channel, and OC-3/STM-1 to OC-48/STM-16 applications. It incorporates pin at which variable dc signal can be applied to adjust output signal crossing from 20-80%. Operating from 3.3 V supply over -40 to +85°C temperature range, input signals with data rates from 155 Mbps to 3.2...

Read More »
High-Linearity Driver Amps suit wireless applications.
Electronic Amplifiers

High-Linearity Driver Amps suit wireless applications.

Broadband, 2-stage driver amplifiers, MAAMSS0056 and MAAMSS0057, are gain blocks with respective output P1dB levels of +27.5 and +31 dBm as well as gains of 22 and 20 dB at 2,140 MHz. Fabricated using GaAs HBT process, products have usable bandwidth range of 250-4,000 MHz and can be optimized for specific frequency range with external matching components. Lead-free, RoHS-compliant amps suit...

Read More »
Electronic Amplifiers

Wideband Op Amp features input noise of 0.65 nV/sqrtHz.

Available in SOT23-5L or SO-8 package, TSH300 offers bandwidth of 200 MHz at gain of 5 V/V. It operates from 4.5-5.5 V on either single or dual supplies over -40 to +85°C temperature range. With slew rate of 230 V/Â-µ and SFDR of 55 dBc, measured with 10 MHz output sine wave of 2 Vp-p into 100 ohm load, amplifier is suitable as component in A/D converter interface as well as high end...

Read More »
Electronic Amplifiers

Class AB Audio Amplifier measures 1.25 x 1.25 x 0.4 mm.

Offered in Pb-free, 9-bump micro SMD package, LM4995 Boomer® 1.3 W mono Class AB audio amp operates on 5 V supply and is capable of driving 8-ohm speaker load at continuous average output of 1.3 W. It does not require bootstrap capacitors or snubber circuits, is unity-gain stable, and has externally configurable gain. Suited for cell phone handsfree and ringer functions, unit offers power...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics