Amplifier is QMLV-qualified for space-level applications.
Model LMP2012WGLQMLV rail-to-rail output operational amplifier measures and continually corrects input offset error voltage while eliminating unwanted 1/f voltage and current noise. It is radiation tested to 50 K rad (Si) and displays 90 dB PSRR rating over full space temperature range. Operating from 2.7-5 V supply voltage, amplifier offers 60 Â-µV input offset voltage over -55 to...
Read More »Industrial Radio includes Ethernet capabilities.
Offering point-to-point range of 60 miles with clear line of sight, FGRplus Industrial 900 MHz Radio supports TCP, industrial grade wireless security, and serial communications. It includes 2 serial ports, 1 Ethernet port, 1 diagnostics port, and GUI interface. With input voltage range of 6-30 Vdc, radio provides 154 Kbps over-the-air throughput and is suited for oil and gas, military, electric...
Read More »CMOS Input Op-Amps consume 780 microamps at 2.5 V.
Suited for sensor signal conditioning and battery-powered applications, Series TSV911/2/4 offers 8 MHz gain-bandwidth and is unity-gain stable for capacitive loads up to 200 pF, while Series TSV991/2/4 offers 20 MHz gain-bandwidth for gain up to 3 or above. Rail-to-rail units operate from 2.5-5.5 V and include ultra-low input bias current of 1 pA. To minimize handling and fabrication risks,...
Read More »Class-D Audio Amp offers 64-step digital volume control.
Supplied in 24-pin SOP, PAM8803 Class-D audio amplifier is built on filter-free architecture and features mute/enable function. It delivers 3 W stereo into 4 ohm load at less than 10% THD+Noise and offers EMI level under 30 dBÂ-µV/m. Exhibiting efficiency higher than 90% with 8 ohm load, solution only requires one input coupling capacitor per channel in external circuit. Applications include...
Read More »
The Ultimate Guide to Packaging Automation Solutions
This ebook provides an in-depth guide to packaging automation solutions.
Read More »KDDI and Fujitsu Develop Practical-Use High-Efficiency Amplifier for Mobile WiMAX; New Amplifier Offers Industry-leading Levels of Power Efficiency
Tokyo, Japan, Mar. 02, 2007 - KDDI Corporation, Fujitsu Limited, and Fujitsu Laboratories Ltd. today announced their joint development of a high-efficiency amplifier applicable for mobile WiMAX (IEEE 802.16e-2005), a next-generation wireless broadband communications protocol, which offers industry-leading levels of power efficiency. The new amplifier is a result of joint development efforts which...
Read More »TriQuint to Introduce New GaAs High Power Amplifiers at 2006 European Microwave Week (EuMW) Exhibition
New Packaged & MMIC Products Target Low-Cost Emerging Markets, Products Are Lead-Free and RoHS Compliant HILLSBORO, Ore. & RICHARDSON, Texas-Sept. 11, 2006-TriQuint Semiconductor (Nasdaq:TQNT), a leading supplier of microwave and millimeter wave products for wireless communications infrastructure and high-reliability communications systems, will introduce two new high-OTOI (output third order...
Read More »Cirrus Logic CobraNet Technology to Showcase 'CobraCom' Reference Platform at AES
OEM Reference Platform Speeds Production of CobraNet-Enabled Network-Powered Digital Audio Products 121st AES Convention Booth #226 SAN FRANCISCO--Cirrus Logic Inc. (Nasdaq:CRUS) has announced CobraCom(TM), a new product development platform addition to its industry-leading CobraNet® networked digital audio technology. At booth #226 in the Moscone Convention Center, Cirrus Logic will...
Read More »Now Shipping - New West Coast Customs Dual Sealed Powerboxes from Directed Electronics
Pre-Wired and Pre-Tuned Dual 10 and 12" Powered Subwoofer Enclosures Hit Harder and Lower Than Ever VISTA, Calif., Feb. 6 /- Directed Electronics, Inc., (NASDAQ:DEIX), holds number one market share positions in premium home theater loudspeakers, consumer branded vehicle security and remote start systems, and aftermarket satellite radio receivers. Directed is also a major supplier of mobile audio...
Read More »AR Adds Higher Power Amplifiers for Testing in the 4.0 - 10.6 GHz Frequency Range
4G11 Family Now Includes 1, 5, 10, 20, 40 and 80-Watt Units Souderton, PA - 2/8/07 - AR RF/Microwave Instrumentation has expanded its line of 4G11 solid-state broadband amplifiers that cover the 4.0 - 10.6 GHz frequency range. To satisfy the growing need for low power, high frequency applications, the 4G11 family of amplifiers now includes six units that deliver 1, 5, 10, 20, 40 and 80 watts of...
Read More »Power Amplifier suits mobile WiMAX applications.
Operating in 2.5-2.7 GHz frequency band, AWM6423 comes in 4.5 x 4.5 mm module and supports 802.16e-2005 standard. Integrated step attenuator and output power detector help minimize external component count and PCB space requirements. Based on InGaP-Plus(TM) process technology, RoHS-compliant product offers fully matched RF ports and can operate from +2.9 to +4.2 V power supply. Power efficiency...
Read More »
Locon Sensors Withstand Extreme Temperatures
Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.
Read More »
