Electronic Amplifiers

Electronic Amplifiers

Intersil Achieves 1nV Noise Performance in a Single-Supply Op Amp

Intersil's ISL28x90 and ISL28x91 Deliver the Industry's Best Noise and Total Harmonic Distortion Performance among Rail-to-Rail Output, Single-Supply Precision Op Amps MILPITAS, CA, July 02, 2007 - Intersil Corporation (NASDAQ Global Select: ISIL) today announced the release of the ISL28190, ISL28290, ISL28191 and ISL28291. These devices, part of Intersil's pinPOINT(TM) Precision Analog product...

Read More »
Electronic Amplifiers

Op Amps/Comparators feature low supply current consumption.

With single-supply input voltage range of 1.8-5.5 V, rail-to-rail I/O operational amplifiers and comparators are suited for low-power precision applications running off two 1.5 V alkaline batteries. Model ISL28194 offers supply current rating of 330 nA (typ) and 450 nA (max), while Model ISL28195 consumes 1 Â-µA of supply current. Models ISL28197 and ISL28196 comparators typically consume...

Read More »
Electronic Amplifiers

Powerwave Introduces 1900MHZ Tower Mounted Amplifier

Designed to enhance coverage and improve the uplink signal quality for RET antennas in UMTS and AWS networks, the TMA is also AISG compatible CTIA WIRELESS 2007, ORLANDO, Fla., Booth #2163, March 28, 2007 - Powerwave Technologies, Inc. (NASDAQ:PWAV), a global source for end-to-end wireless infrastructure solutions, today expanded its growing line-up of tower mounted amplifiers (TMAs) with the...

Read More »
Electronic Amplifiers

Powerwave Extends Coverage of High Power Wideband Radio Head to Support Advanced Wireless Services Frequency Band

Combining Exceptional Reliability with High Performance, the Wideband Radio Head is Ideal for Deployments in Dense Urban Areas CTIA WIRELESS 2007, ORLANDO, Fla., Booth #2163, March 27, 2007 - Powerwave Technologies, Inc. (NASDAQ:PWAV), a global source for end-to-end wireless infrastructure solutions, announced that its high power Wideband Radio Head (WRH) now offers support for the Advanced...

Read More »
Electronic Amplifiers

Toshiba to Showcase C-, X- and Ku-band GaAs FETs, X-Band GaN HEMT for Radar and Medical Applications, and RF Devices for Two-Way Radios and DTTV Tuners at MTT-S

Microwave, RF And Small Signal Devices Will Be On Display At IEEE MTT-S International Microwave Symposium, June 5-7 In Hawaii HONOLULU, Hawaii, June 5 / - Toshiba America Electronic Components, Inc. (TAEC)* will feature an extensive array of C-, X- and Ku-band gallium arsenide (GaAs) field effect transistors (FETs) developed by Toshiba Corp. (Toshiba) as well as a broad line-up of radio frequency...

Read More »
Electronic Amplifiers

PGAs offer 4 levels of internal frequency compensation.

Models LMP8100A and LMP8100 programmable gain amplifiers (PGAs) are built on 33 MHz CMOS input, rail-to-rail I/O operational amplifier with typical open-loop gain of 110 dB. Model LMP8100A delivers 0.03% gain accuracy using software adjustable gain (in 1 V/V increments) from 1-16 V/V over full industrial temperature range of -40 to 125°C, while Model LMP8100 semi-precision grade PGA...

Read More »
Operational Amplifier requires only 1.6 mA supply current.
Electronic Amplifiers

Operational Amplifier requires only 1.6 mA supply current.

Operating from single 2.7-5.5 V supply, Model AS1710 can swing to within 100 mV from rails while sinking or sourcing 50 mA of output current. Large short-time loads are covered with peak current of greater than 200 mA. Available in 6-pin SC70 package for -40 to +125°C operating environments, device features 10 MHz unity gain bandwidth and 10 V/Â-µs slew rate. It is suited for headphone...

Read More »
Electronic Amplifiers

Linear Power Amplifier is designed for PHS applications.

Supplied in Pb-free 3 mm 12-lead PQFN package, M/A-COM MAAP-000082 is suited for space-restricted PHS (Personal Handy-phone System) applications that require high gain and efficiency. This 1.9 GHz, 3-stage power amplifier is equipped with ESD protection and withstands electrostatic discharges up to 1,000 V without performance degradation. Consuming 200 mA of current, it provides 21 dBm of linear...

Read More »
Electronic Amplifiers

HiFi Audio Op Amps feature THD+N of 0.00003%.

Exhibiting linear behavior, LME(TM) high-fidelity audio operational amplifiers have low-input noise density of 2.7 nV/sqrt Hz, 1/f noise corner of 60 Hz, and 600 W output drive. While 44 V-rated LME49860 (dual) is unity-gain stable over supply range ±2.5-22 V and provides output current capability of 26 mA, 34 V-rated LME49710 (single), LME49720 (dual), and LME49740 (quad) are unity-gain...

Read More »
Electronic Amplifiers

STMicroelectronics Passes Shipment Milestone for Single-Chip Car Radio Tuner IC

ST reaffirms leadership in analog AM/FM car radio market with shipments of 15 million tuner ICs in less than two years Geneva, July 2, 2007 - STMicroelectronics, a world leader in automotive semiconductors, today announced it has shipped more than 15 million units of its TDA7540 high-performance single-chip tuner IC used in analog AM/FM car radio applications, reaffirming its position as one of...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers