Electronic Amplifiers

ISM Power Amplifier targets cordless applications.
Electronic Amplifiers

ISM Power Amplifier targets cordless applications.

Operating from 2.4-2.5 GHz, dual-mode M/A-COM MAAPSS0081 features integrated power enabler pin providing ramp control and separate power mode pin for current savings in low power mode state. In High Power Mode, amplifier generates 25 dBm of output power while drawing 300 mA of current, and in Low Power Mode, output power is 17 dBm with current of 110 mA. Housed in RoHS-compliant, 3 mm PQFN...

Read More »
Electronic Amplifiers

Amplifiers operate in 2 MHz to 1.6 GHz frequency range.

Available in 8-pin Â-µMAX® package, Models MAX9930-MAX9933 low-power logarithmic amplifiers control RF power and transimpedance amplifiers and detect RF power levels. They have typical dynamic range of 45 dB with accuracy of ±1 dB, typical shutdown current of 13 µA, and consume 5.9 mA with 5 V supply. Units measure voltage in signal range of -58 to -13 dBV...

Read More »
Electronic Amplifiers

Single Supply Op-Amp delivers low-noise, e-Trim(TM) precision.

Along with noise density of 7.5 nV/sq rt Hz and quiescent current of 950 Â-µA (max), OPA376 combines offset voltage of 25 µA (max) and bandwidth of 5.5 MHz in micro-size SC70, SO-8, and SOT23-5 packages. Attributes provide balance of parameters required to meet ac and dc specifications for filtering, DAQ, and single-supply processing systems. Dual and quad versions are also...

Read More »
Electronic Amplifiers

Power Amplifier has integrated boost converter.

Monolithic, filter-free, Class-D audio power amp (TPA2013D1) features integrated boost converter that provides adjustable constant output power up to 1.5 W in entire Li-Ion battery range of 2.3-4.8 V, making audio output power insensitive to battery voltage fluctuations. Exhibiting 85% overall efficiency, solution generates high output power from 1.8-5.5 V supply voltage without distorting audio....

Read More »
Differential Amplifier offers 3 GHz gain bandwidth.
Electronic Amplifiers

Differential Amplifier offers 3 GHz gain bandwidth.

Model LTC6406 fully differential ADC driver features rail-to-rail input stage and independently adjustable output common mode range. Operating on supplies from 2.7-3.5 V, device features differential outputs that each swing from near ground to 2 V. It achieves 90 dBc distortion for input frequencies from DC to 20 MHz and nearby -70 dBc distortion from DC to 50 MHz. Current consumption is 18 mA...

Read More »
Electronic Amplifiers

HDMI Amplifier comes with dual outputs.

Designed for Dual Display Theater systems, 1x2 HDMI Distribution Amplifier allows users to simultaneously show same HD video and audio on 2 displays at full 1,080p resolution. Digital Toslink Audio output couples audio data from HDMI data stream. Unit processes HDMI data and outputs audio via Toslink Audio while leaving HDMI signals available to both outputs. Users can integrate amplifier with...

Read More »
Laboratory Amplifiers feature plug-and-play operation.
Electronic Amplifiers

Laboratory Amplifiers feature plug-and-play operation.

Suitable as Lithium Niobate modulator driver, LABware Model 8001 integrates 12.5 Gb/s broadband amplifier, power supply, and front panel controlled amplitude and crossing point. Unit features max amplitude of 8 Vpp with 14 ps risetime saturated output. Integrating 10 kHz to 15 GHz low noise linear amplifier and power supply, LABware Model 8003 is suitable as photodetector output amplifier. It...

Read More »
Zero-Crossover Op Amp suits battery-powered applications.
Electronic Amplifiers

Zero-Crossover Op Amp suits battery-powered applications.

Featuring single-input-stage architecture that delivers offset voltage of 750 Â-µV over entire rail-to-rail input range and CMRR of 100 dB min, OPA369 achieves rail-to-rail performance without input crossover. This solves design problem of input offset distortion due to change in common mode voltage. Supplied in SC70 package (single), product features 1 µA quiescent current and...

Read More »
Electronic Amplifiers

Instrumentation Amplifier has rail-to-rail I/O capability.

Offered as single-chip, 6 x 9.9 mm QSOP solution, Model ISL28470 quad instrumentation amplifier delivers offset voltage of ±150 Â-µV and typical CMMR (common mode rejection ratio) of 110 dB. It is optimized for low 2.4-5 V single supplies and is capable of swinging above positive supply rail and to 10 mV below negative supply. Unit simplifies designs for applications that require...

Read More »
Electronic Amplifiers

Intersil Achieves 1nV Noise Performance in a Single-Supply Op Amp

Intersil's ISL28x90 and ISL28x91 Deliver the Industry's Best Noise and Total Harmonic Distortion Performance among Rail-to-Rail Output, Single-Supply Precision Op Amps MILPITAS, CA, July 02, 2007 - Intersil Corporation (NASDAQ Global Select: ISIL) today announced the release of the ISL28190, ISL28290, ISL28191 and ISL28291. These devices, part of Intersil's pinPOINT(TM) Precision Analog product...

Read More »

All Topics