Electrical Power Generators

Generator operates at 65 dBa at 23 ft.
Electrical Power Generators

Generator operates at 65 dBa at 23 ft.

Offering prime power output of 45 kVA, Super Quiet Model T45 outputs 3-phase power on distribution side with single-phase receptacles located on control panel, allowing operation of both sources simultaneously. Three-phase outputs include 208, 220, 240, 416, 440, and 480 V plus optional 600 V. Single-phase outputs of 120, 127, 139, 240, 254, and 277 V are standard. Unit is powered by Tier II...

Read More »
Welding Generators feature sunlight-readable digital meters.
Electrical Power Generators

Welding Generators feature sunlight-readable digital meters.

TrailblazerÂ-® 302 provides 30-300 A dc output and 35-225 A ac output, while TrailblazerÂ-® 275 offers 30-275 A dc output. Engine-driven units include 4 preset DIG settings, adaptive hot start, and lift-arc/scratch start TIG with auto-stop. They deliver 10,000 W of useable peak power for minimum of 30 seconds, suitable for plasma cutting and running MIG welder. A 12 gal fuel tank allows...

Read More »
Low-BTU Generator Set runs on landfill-emitted methane.
Electrical Power Generators

Low-BTU Generator Set runs on landfill-emitted methane.

GQ series runs on methane emitted from coal seams or dilute methane gas mixture produced by natural decay in landfills and sewage digesters. It produces continuous 1570 kW (50 Hz) or 1750 kW (50 and 60 Hz) and is powered by modified versions of QSV81G, 16-cylinder and QSV91G, 18-cylinder natural gas reciprocating engines. Series features double-safety gas shutoff valves and is suited for combined...

Read More »
Welding Generator offers diesel engine option.
Electrical Power Generators

Welding Generator offers diesel engine option.

ClassicÂ-® 300 D is available with Kubota V2203M, a 4-cylinder, water-cooled, diesel engine that produces 32.5 hp @ 1,800 rpm and has 15 gal fuel capacity. Generator incorporates all copper windings and Custom Arc(TM) high-idle RPM/OCV adjustment controls. Suited for pipe and general-purpose welding, unit offers 300 Adc at 60% duty cycle, has 5 current ranges, and generates 3,000 W of ac...

Read More »
Considerations for Choosing a Plastic Injection Molder
Sponsored

Considerations for Choosing a Plastic Injection Molder

Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.

Read More »
Generators operate on gas with variety of methane levels.
Electrical Power Generators

Generators operate on gas with variety of methane levels.

Driven by electronically controlled, lean-burn gas reciprocating engines, CatÂ-® G3500E Series natural gas-fueled generator sets operate on Miller Combustion Cycle. They deliver mechanical efficiency up to 44.5% due to camshaft and turbocharger design. Models G3516E and G3520E are 16- and 20-cylinder units operating at 50 Hz/1,500 rpm and 60 Hz/1,200 rpm respectively. Both incorporate...

Read More »
Portable Generator features continuous, quiet operation.
Electrical Power Generators

Portable Generator features continuous, quiet operation.

Able to run continuously for 11 hr, YG4000D employs 4-stroke OHV, 251 cc engine that produces 8.5 hp for max output of 4,000 W. It weighs 132 lb, occupies 6.0 ftÂ-³, and operates at noise level of 69 dB. Features include cast-iron cylinder liner, brushless alternator, and Oil Watch warning system. Auto decompression system and transistor controlled ignition ensure reliable operation. Fitted...

Read More »
Portable Generators output 1,100 to 4,300 W.
Electrical Power Generators

Portable Generators output 1,100 to 4,300 W.

Power Series delivers stable power through automatic voltage regulation. Model R1100 is powered by EH09-2 OHV gasoline engine, while Models RG2800DX, RG3200DX, and RG4300DX are powered by EX17, EX21, and EX27 OHC gasoline engines, respectively. Reverse cooling allows generators to be fully enclosed without threat of overheating. Model RG4300DX includes Multi-Monitor, which integrates AC...

Read More »
High-Power Generators feature impact-resistant design.
Electrical Power Generators

High-Power Generators feature impact-resistant design.

Models G2800L and G4300L are 2,800 W and 4,300 W generators with EX Series air-cooled engines utilizing chain-driven overhead cam technology. They include automatic compression release system and recoil starter system with electronic ignition. Equipped with overhead valve engine, 2.5 hp Model G1100 offers max output of 1,100 W. It includes 1.1 gal fuel tank with 4.2 hr runtime. All feature oil...

Read More »
Electrical Power Generators

Generator offers multiple power sources from one engine.

Hydrapack2, powered by Yanmar diesel engine, combines hydraulic power pack and electric generator. Rated for continuous duty, product provides simultaneous power for two 10 gpm hydraulic tool circuits or one 10 gpm hydraulic tool circuit and 4,000 W, 30 A electric generator. Unit features two 120 V outlets, one 12 V outlet, and 2 adjustable (0-10 gpm) hydraulic tool circuits @ 2,000 psi....

Read More »
Welding Generator offers multiprocess welding ouput.
Electrical Power Generators

Welding Generator offers multiprocess welding ouput.

Mid-frame, diesel engine-driven PRO 300 CC/CV provides Lift-Arc(TM) TIG arc starts suitable for code-quality welds on process pipe and true CV output for flux cored wires used for structural steel. Measuring 32 x 26 x 56 in., unit weighs 1,100 lb and utilizes 1,800 rpm CAT diesel engine. It produces 20-410 A multiprocess welding output (Stick, TIG, MIG, Flux Cored) and 12 kW of generator power.

Read More »

All Topics