Electrical Power Generators

Miller To Showcase New Plasma Cutter, TIG Welder, Helmet Designs and More at 2006 Fabtech International/AWS Welding Show
Electrical Power Generators

Miller To Showcase New Plasma Cutter, TIG Welder, Helmet Designs and More at 2006 Fabtech International/AWS Welding Show

APPLETON, Wis., 2006 Miller Electric (booth #23040) will showcase several new products, enhancements to existing products and a new Roadshow semi trailer-- a traveling welding and cutting exhibition, complete with classroom--at the 2006 Fabtech International/AWS Welding Show in Atlanta. New products on display will include the SycrowaveÂ-® 200 AC/DC TIG/Stick welder, the SpectrumÂ-® 1251...

Read More »
New Rental Generators from Cummins Power Generation are Cleaner, Quieter to Meet Emissions Standards
Electrical Power Generators

New Rental Generators from Cummins Power Generation are Cleaner, Quieter to Meet Emissions Standards

MINNEAPOLIS - New low-emissions rental generator sets from Cummins Power Generation offer cleaner, quieter operation to meet EPA emissions standards. Intended for temporary power applications, the 60 kW, 100 kW, 150 kW, 230 kW and 500 kW trailer-mounted diesel generator sets feature enhanced performance, increased running time, and easy operator access for maintainability. The 150 kW and 230 kW...

Read More »
Electrical Power Generators

Portable Generators deliver clean, quiet power.

Powerchief portable generators utilize inverter technology to produce clean sine wave of energy that prevents surging, making them suitable for use with sensitive electronics. Oil alert shuts unit off when oil drops below safe operating level to prevent possible damage. Inverter units also have l2 Vdc terminal for use when charging automotive type batteries.

Read More »
Electrical Power Generators

Welder/Generator offers 5,500 W AC generator power.

Featuring Robin/Subaru-® 9 hp EX 27 engine, Weldanpower-® 125 provides DC stick welding power with 125 DC Amps for variety of projects and 5,500 surge watts of AC generator power for work lights, tools, and pumps. Unit is capable of welding steel, stainless steel, cast iron, or hardfacing projects. Tubular roll cage provides added protection and many lift handle points. Two people can transport...

Read More »
5 Questions to Ask When Choosing a Custom Glass Manufacturer
Sponsored

5 Questions to Ask When Choosing a Custom Glass Manufacturer

Due to the inherent complexity of glass fabrication, many professionals seeking glass services know exactly what kind of part is needed, but are unclear on the intricacies of the actual manufacturing process. PEG's exclusive guide is designed to help professionals navigate the custom glass manufacturing process with valuable information.

Read More »
Cogeneration Unit is suited for multi-family housing.
Electrical Power Generators

Cogeneration Unit is suited for multi-family housing.

Powered by natural gas or propane, 15 kW VC-15 generator allows multi-family facilities to produce on-site power and hot water. Unit uses whisper-quiet, internal engine to spin generator. Water that cools engine is afterwards circulated through heat exchanger, producing pre-heated water that is fed into facility's boiler or water heater. Unit can also function as backup generator during power...

Read More »
Heat and Power Module incorporates 300 kW generator.
Electrical Power Generators

Heat and Power Module incorporates 300 kW generator.

Combined heat and power module produces electricity and hot water from one natural gas fuel source. Self-contained unit includes exhaust gas and coolant heat exchangers, QSK19G PowerCommandÂ-® controller, and remote monitoring system. It measures 15.1 x 6.5 x 7.9 ft and is offered in 50 and 60 Hz models. Former produces 315 kW electrical energy and 1.58 MBtu/hr thermal energy, and latter...

Read More »
Electrical Power Generators

Power Generator is suited for use in forklifts.

Model E7 AFC Generator is built with two 900 W POWERSTACK MC250 alkaline fuel cell stacks, which give unit 1.8 kW nominal power rating with ability for max power output to reach 2.15 kW. Ability to overload generator by 20% provides power for peak loads during acceleration and hill climbing, and fuel cells keep voltage supply at constant level. Silent-running, emission-free generator replaces...

Read More »
Gas Turbine suits industrial applications in 6 MW range.
Electrical Power Generators

Gas Turbine suits industrial applications in 6 MW range.

Cold-end-drive, single-shaft Taurus(TM) 65 generator suits cogeneration, combined cycle, and other power generation applications. Generator set is rated at 6000 kWe for continuous duty at ISO conditions. It features 13-stage axial compressor with 15:1 pressure ratio that produces air inlet flow of 19.4 kg/sec, and utilizes 3-stage turbine with shrouded stage-3 turbine blade. SoLoNO(TM) combustion...

Read More »
Electric Generators provide prime, portable, or standby power.
Electrical Power Generators

Electric Generators provide prime, portable, or standby power.

Packaged generator line can be used for commercial and industrial applications. Generators are available from 200 to 2500 kW in 4-pole, 1800 rpm machines in 4-frame diameters, and from 200 to 1750 kW, 3 phase, in 6-pole, 1200 rpm machines in 3-frame diameters. All standard 50 and 60 Hz 3-phase voltages are available up to 3300 V at 50 Hz and 4160 V at 60 Hz. Single-phase models are also available.

Read More »
Power System incorporates welder into boom lifts.
Electrical Power Generators

Power System incorporates welder into boom lifts.

SkyWelder(TM) system features Miller(R) Model CST 250 welder, which has 5 to 250 amp range and can be used for stick and TIG welding applications. Power leads run through boom's power track to 7,500 W generator mounted in engine compartment which supplies power to welder and to 110 Vac platform receptacle. Welder is integrated into boom lift's platform beneath the control panel. Available on...

Read More »

All Topics