Welding Generator uses Kubota diesel engine.
Offering peak generator power of 10,000 W, Bobcat(TM) 250 D NT incorporates 3-cylinder, 18.8 hp, liquid-cooled diesel engine. On job sites, unit can also serve as back-up power source for running floodlights and tools that require electrical power. Constructed with heavy-duty parts and without PC boards, full casing protects components from accidental impact and harsh elements. CV-rated output of...
Read More »
Hydrogen Generator Set provides clean power for utilities.
Ecostar(TM) hydrogen fueled, internal combustion engine driven genset offers alternative to small turbines or combustion engines using other fuels. It is capable of producing 114 kVA of power at several voltage levels and phase options, and is based upon standard 6.8 liter Ford production engine that has been modified for hydrogen use.
Read More »
Welding Generator provides high power.
Trailblazer Pro 350 D provides 20 to 350 A of dc Stick/TIG/MIG welding output and 12,000 W continuous, voltage-regulated 120/240 V single-phase generator power. For TIG welding aluminum, it has 35 to 250 ac output. Powered by 26 hp Kubota diesel engine, it has 100% duty cycle rating of 300 A at 32 V in ambient temperature of 104Ã-ºF. Generator features Arc Drive and Hot Start(TM) for Stick...
Read More »
Generator provides portable, renewable power.
SPDC 2500 Watt electronic generator does not require gasoline to run; it generates AC/DC electric energy from sunlight. Through use of photovoltaic power, unit eliminates production noise and fumes. It also eliminates risk and inconvenience involved in fuel transportation and usage. Self-contained power plant requires no maintenance and can be used to power almost any appliance.
Read More »
A Guide to Custom Water Manifold Assemblies
This white paper provides a guide to custom water manifold assemblies.
Read More »
Electric Generators provide prime, portable, or standby power.
Packaged generator line can be used for commercial and industrial applications. Generators are available from 200 to 2500 kW in 4-pole, 1800 rpm machines in 4-frame diameters, and from 200 to 1750 kW, 3 phase, in 6-pole, 1200 rpm machines in 3-frame diameters. All standard 50 and 60 Hz 3-phase voltages are available up to 3300 V at 50 Hz and 4160 V at 60 Hz. Single-phase models are also available.
Read More »
Power System incorporates welder into boom lifts.
SkyWelder(TM) system features Miller(R) Model CST 250 welder, which has 5 to 250 amp range and can be used for stick and TIG welding applications. Power leads run through boom's power track to 7,500 W generator mounted in engine compartment which supplies power to welder and to 110 Vac platform receptacle. Welder is integrated into boom lift's platform beneath the control panel. Available on...
Read More »
Electric Generator produces 6,100 W.
DP6000 can run for 12 hr at half load and 9 hr at full load. It has electric start 12-hp Kohler engine with cast-iron cylinder sleeve and quiet muffler. Low-oil shutoff helps extend life while automatic idle control provides better fuel economy and helps prevent surges when operating power tools. It has maintenance-free, brushless alternator; GFCI protection; hourmeter; and overload indicator....
Read More »
Generator adds additional power to boom lifts.
SkyPower(TM) generator provides 7,500 W of 110 or 220 Vac power at platform for added work efficiency. Power cable is routed from base-mounted generator through boom power track to GFIC outlet in platform. Air line is also routed through power track for operation of pneumatic tools or pressure washers. SkyPower is available on boom lifts with platform heights ranging from 40 to 135 ft.
Read More »
Power System incorporates lighting into boom lifts.
Sky Bright(TM) package uses 4 or 6 lights on platform to turn boom lift into 6,000 watt light tower. Power is provided by SkyPower(TM) generator delivering up to 7,500 W of 110 Vac power. Nite Bright(TM) accessory has four 40 watt lights mounted on chassis, and two 40 watt lights mounted on platform for work in low light conditions. Both options are available on boom lifts with platform heights...
Read More »
Stick/TIG Inverter provides simple operation.
CST(TM) 250, produces 250 amps at 50% duty cycle and weighs just 40 lb. CST Rack with four CST 250 inverters weighs 328 lb. Operator interface includes On/Off switch, amperage control knob, infinitely adjustable from 5 to 250 amps, and process select switch that eliminates setting errors. Receptacle, on front of machine, permits remote amperage control when Stick or TIG welding. Inverter accepts...
Read More »
5 and 13 Micron Resolve Columns with Greater Bed Stability
Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.
Read More »
