Stand-By Generators target emergency situations.
Combined Heat and Power EnergyNow(TM) Generator Sets convert natural gas to electric power for peak demand or stand-by applications. Controller allows them to automatically interface with utility company supply lines and switch on during peak power usage periods, or run continuously to provide clean electricity, independent of unpredictable delivery systems in traditional network.
Read More »
Miller To Showcase New Plasma Cutter, TIG Welder, Helmet Designs and More at 2006 Fabtech International/AWS Welding Show
APPLETON, Wis., 2006 Miller Electric (booth #23040) will showcase several new products, enhancements to existing products and a new Roadshow semi trailer-- a traveling welding and cutting exhibition, complete with classroom--at the 2006 Fabtech International/AWS Welding Show in Atlanta. New products on display will include the SycrowaveÃ-® 200 AC/DC TIG/Stick welder, the SpectrumÃ-® 1251...
Read More »
New Rental Generators from Cummins Power Generation are Cleaner, Quieter to Meet Emissions Standards
MINNEAPOLIS - New low-emissions rental generator sets from Cummins Power Generation offer cleaner, quieter operation to meet EPA emissions standards. Intended for temporary power applications, the 60 kW, 100 kW, 150 kW, 230 kW and 500 kW trailer-mounted diesel generator sets feature enhanced performance, increased running time, and easy operator access for maintainability. The 150 kW and 230 kW...
Read More »Portable Generators
Mi-T-MÃ-® Corporation, manufacturer of industrial pressure washer, air compressors, wet/dry vacuums, jobsite toolboxes and water treatment systems is now manufacturing a full line of portable generators for the rental and construction industries. Our 3200 and 4300 watt inverter generators feature inverter technology that reduces size, weight, noise and fuel consumption and produces commercial...
Read More »
Quick Guide to Components for Medical Furniture
When designing for a hospital environment, it is essential to consider the small components that enable your application to perform to a high level. Hospital furniture has different users, so it's not only patients you need to think about, but also caregivers.
Read More »
Generator produces steady 3,000 W for 7.4 hr on one tank.
Suited for rental and construction industries, 3,000 W extended-run generator features Honda OHV engine with low oil shutdown. CSA-listed unit also incorporates Mi-T-MÃ-® roll cage design, which features isolator design and solid-state circuitry. Its 2.6 gal fuel tank capacity provides for 7.4 hr of run time at full load. Along with 120 V alternator and fuel shutoff valve, unit features...
Read More »
Portable Inverter Generators power sensitive electronics.
Suited for construction industry, 3,200 and 4,300 W generators utilize inverter technology to produce commercial-quality ac power for electronic equipment. They meet CARB and EPA emission standards and employ Subaru OHC engines with low oil shutdown and electric start. Roll cage design has 4 wheels, fuel gauge, idle control, fuel shutoff valve, voltmeter, hour meter, and double wall acoustical...
Read More »Welder/Generator suits construction, pipe, and fleet work.
Powered by 4-cylinder, water-cooled, 1,800 rpm PerkinsÃ-® diesel engine, VantageÃ-® 400 provides 400 A of dc welding output, 19,000 W peak 3-phase ac generator power, and 12,000 W peak 1-phase ac auxiliary power. Housed in corrosion-resistant stainless steel case, unit includes Lincoln Chopper Technology(TM) for smooth arc, and Voltage Regulation Device(TM), which allows operator to...
Read More »Generator Sets meet EPA Tier 2 emissions requirements.
Featuring 30, 50, and 60 L engines rated over 751 hp, diesel generator models include 750 kW DQFAA, 800 kW DQFAB, 900 kW DQFAC, 1,000 kW DQFAD, 1,250 kW DQGAA, 1,500 kW DQGAB, 1,750 kW DQKAA, and 2,000 kW DQKAB. Modular common-rail fuel injection system, integrated with electronic control module, enables engines to continually maintain optimum balance between load demands, fuel efficiency, and...
Read More »Welder/Generator delivers smooth arc characteristics.
Consisting of 300 A welder and 10 kW generator, Model DLW-300ES provides 100% duty cycle at 280 A. When idling, unit operates up to 160 A and uses 0.39 gallons of fuel per hour at 120 A, and 1.1 gph at full load. Arc force dial allows operators to fine tune arc to desired quality. Measuring 50 x 27 x 32 in., diesel-powered, 10,000 W welder/generator includes thermal overload light, multiple ac...
Read More »Generator Sets comply with EPA Tier 3 standards.
Based on Cummins 9 liter inline 6-cylinder diesel engine, DSHA low-emissions generator sets operate at 60 Hz and are intended for standby and prime power use. Model DSHAA is standby-rated at 150 kW and prime-rated at 135 kW, Model DSHAB is rated standby/prime 175/160 kW, and Model DSHAC is rated 200/180 kW. Series also features PowerCommandÃ-® digital control system with automatic remote...
Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.
Read More »
