Dimensional Measurement & Inspection Probes

Dimensional Measurement & Inspection Probes

T.J. Snow Upgrades CMM Capabilities

Chattanooga, Tennessee — T.J. Snow Company recently upgraded its CMM (Coordinate Measuring Machine) capabilities by purchasing a new FARO Edge 9-foot Arm with Laser Line Probe HD.Â-  T. J. Snow's new portable FARO Arm features state-of-the-art high definition scanning technology. The 7-axis FARO Edge is one of the most sophisticated non-contact measurement tools available in its class....

Read More »
Dimensional Measurement & Inspection Probes

Phoenix Aerial Systems Purchases its First RIEGL VUX-1

RIEGL USA is proud to announce that Phoenix Aerial Systems has purchased its first VUX-1 UAS LiDAR scanner! The VUX-1 was developed as an innovative, new class of LiDAR sensor to meet the challenges of emerging surveying solutions by UAS, UAV, RPAS, gyrocopters, and ultra-light aircraft, both in measurement performance and in system integration. Phoenix Aerial is excited to offer the new RIEGL...

Read More »
Dual Linear Array Probe provides corrosion imaging.
Dimensional Measurement & Inspection Probes

Dual Linear Array Probe provides corrosion imaging.

Adding entry-level inspection capability to existing Olympus HydroFORM® and RexoFORM corrosion solutions, Dual Linear Array™ Probe helps optimize inspection of internally corroded parts such as pipes, tanks, and plates. Phased array solution offers features such as large beam coverage, accelerated scan speed, and C-scan imaging with increased data-point density. Aluminum housing...

Read More »
Dimensional Measurement & Inspection Probes

RIEGL USA to Exhibit at SME 2015!

RIEGL USA will be exhibiting at SME 2015! SME (Society for Mining, Metallurgy Exploration) 2015 will be held at the Colorado Convention Center in Denver, Colorado from February 15 through February 18, 2015. RIEGL USA is excited to be attending and exhibiting at SME with over 8,500 expected attendees coming! RIEGL USA will be exhibiting at Booth 2050 during the conference. Please be sure to come...

Read More »
Video Inspection Systems feature leak-proof design.
Dimensional Measurement & Inspection Probes

Video Inspection Systems feature leak-proof design.

With Wet/Dry Video Inspection Systems, users can inspect inaccessible or hazardous areas to identify and diagnose hidden problems without disassembly or teardown. IP67-rated probes, grips, and monitors are guaranteed leak-proof to depth of 1 m. Available in non-recording and recording models, scopes feature 3.5 in. LCD monitor with ability to flip still image or video 180° or zoom up to 4X....

Read More »
HEIDENHAIN Touch Probes Now Compatible with FANUC Milling Controls
Dimensional Measurement & Inspection Probes

HEIDENHAIN Touch Probes Now Compatible with FANUC Milling Controls

SCHAUMBURG, ILÂ-  – HEIDENHAIN is proud to introduce a new touch probe cycle package for all common FANUC milling controls. The cycles can be run on the main FANUC controls (0, 01, 16, 18, 21, 30, 31 and 32) and its derivatives (such as the 300i s-A, 310i-A etc.), and are available in the following current HEIDENHAIN touch probes:  TS 260, 440, 444, 460, 640 and 740. Touch probe...

Read More »
LVDT Pencil Probe verifies part measurements.
Dimensional Measurement & Inspection Probes

LVDT Pencil Probe verifies part measurements.

Offering spring extend and pneumatic extend actuation types, KURTSmart PROBE™ outputs linear value over entire stroke of probe. Unit requires 5 V power for measurement operation and can run stand-alone, measuring and sorting parts based on feature size. Onboard input and output port supports triggering of measurement and action to be taken based on measurement result. With 5 LEDs, probe can be...

Read More »
Innovative Product of the Year Winner
Dimensional Measurement & Inspection Probes

Innovative Product of the Year Winner

DeFelsko Corporation DeFelsko's PosiTector® Interchangeable Probes for inspection instruments has been named a Materials Performance Corrosion Innovation of the Year. The American designed and manufactured PosiTector body accepts all interchangeable probes including coating thickness (6000/200/PC), environmental (DPM), surface profile (RTR/SPG), and ultrasonic wall thickness (UTG) probes....

Read More »
Creaform's Portable Optical CMM HandyPROBE Wins Two International Quality Control Awards
Dimensional Measurement & Inspection Probes

Creaform's Portable Optical CMM HandyPROBE Wins Two International Quality Control Awards

Both awards attest to HandyPROBE’s performance versus traditional portable CMMs LÃ-©vis, QC, Canada – Creaform, a worldwide leader in portable 3D measurement solutions and 3D engineering services, today announced that its optical portable CMM, HandyPROBE, has won two awards for being the best quality control product in its class: the MWP Advanced Manufacturing Award 2014 at MACH and the...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers