Touch Trigger Probes offer indexable operation.
Available in 2 versions, TESASTARÃ-® Touch Trigger Probes feature adjustable measuring force to prevent inadvertent triggering when long stylus is used. TESASTAR-IÃ-® Indexable Touch Trigger Probe is adjustable to 168 positions in 15Ã-º increments. TESASTAR probes can be rotated through infinite number of positions for flexibility in measuring complex components. Clockwise rotation...
Read More »Interposer Analysis Probe enables design rates to 533 MT/s.
Suited for double data rate 2, synchronous dynamic random access memory buses, Agilent FSI-60075 DDR2 memory-bus analysis probe utilizes verticle, low-profile interposer design. Operating at full DDR2-533 speeds, probe can be inserted into target memory socket while accepting memory module in extender DIMM slot that supports all DIMM types. Straddle-mount DIMM slot and right-angle Samtec...
Read More »
Laser Scanning Arm suits contact/non-contact measuring.
Laser ScanArm 7-axis contact/non-contact measurement device has integrated laser scanner and LED range finder. Hard probe and laser scanner digitize interchangeably without having to remove either component. Portable unit has open architecture and allows users to collect simple point variations with hard probe with rates of up to 13,000 points/sec. Users can then laser scan sections requiring...
Read More »
Touch Probe automates workpiece alignment and measurement.
Model TS 640 3-D Trigger Probe features integrated blasting unit consisting of 3 nozzles at bottom of touch probe. Nozzles use blast of air or coolant to remove coarse contaminants from area being probed. Infrared LEDs and receiver modules for signal transmission are evenly arranged around circumference of probe, ensuring transmission in all directions of working plane. With 7 m area of...
Read More »Importance of Motor & Generator Maintenance & Repair in the Mining Industry
Electric motors and generators are essential components for mining industry equipment and the Battery Electric Vehicle (BEV) market. These sectors rely upon this equipment heavily to meet high production demands in rugged environments, and so they require careful design, construction, and maintenance to provide longevity and durability. Pumps, hoists, crushers, muckers, haulers, and mills are only some examples of mining and milling equipment utilizing electric motors.
Read More »
Vector Probe offers serial port for system automation.
Model LSI-NIR-VT Near Infrared Vector Probe is for Diffuse Reflectance Spectroscopy and will interface with FTIR, AOTF and Dispersive Spectrometers. Design allows for low internal light reflection and high light collection efficiency ensuring high signal-to-noise characteristics. Probe is stainless steel, PVC and polyamide with 2 m cable. It is suited for process and quality control applications...
Read More »
LVDT Gaging Probes suit quality control applications.
Series BBP/BBT 3/8 in. probes provide measurement of dimensions and can replace mechanical and digital dial gages. BBP models are plain, while BBT models are threaded. Gage heads combine AC-LVDT with linear ball bearing assembly, resulting in 0.000006 in. repeatability. Standard ranges include Ã-
Read More »
Fiber Optic Probe has disposable tip.
Versaprobe offers cuvette precision, is useable in virtually any solution, and eliminates carryover between measurements. Disposable quartz sleeve eliminates need for cleaning while permitting measurements down to UV range. Probe enables use of fiber optics with corrosive or difficult-to-clean samples encountered in biotech, petrochemical, lab, and medical diagnostic applications.
Read More »
Portable UV Inspection Kit finds flaws in the field.
SpectrolineÃ-® AP-400 UltraWand(TM) features 4 W UV probe measuring 1 in. in diameter and 6 in. long. It delivers typical peak 365 nm UV intensity of 5,500 Ã-µW/cmÃ-² at light source and over 1,500 Ã-µW/cmÃ-² at 1 in. Probe is useful in tight places, such as small-diameter pipes and turbine engines. It provides more than 40 hours of inspection time on 8 D-cell alkaline...
Read More »
Scanning Probe is suitable for use with CMMs.
Model SP80 uses Renscan(TM) technology to achieve sub-micron 2D and 3D scanning performance. Passive scanning probe offers isolated optical metrology and digital readheads with 0.02 mm resolution. Product carries styli up to 500 mm length and 500 g weight without need for counterbalancing. Product also offers repeatable kinematic stylus-changing mechanism; passive, no motor design; and isolated...
Read More »Wireless, Armless Probe suits inspection/measurement uses.
Portable T-Probe, offered as an accessory for LTD700/LTD800 laser trackers, inspects and measures with accuracy to 0.1 mm length accuracy in measurement volume of up to 1 full car size. Tool is suited for automotive and related industries.
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
