Dimensional Measurement & Inspection Probes

New RMP400 Machine Tool Probe Comes with Measurement and Machine Performance Checking Feature
Dimensional Measurement & Inspection Probes

New RMP400 Machine Tool Probe Comes with Measurement and Machine Performance Checking Feature

Renishaw’s RMP400 Machine Tool Probe is suitable for mold and die and aerospace applications for measuring complex shapes and contours. Unit uses radio transmission with frequency hopping spread spectrum technology that avoids interference and transmission dead spots. Probe’s ultra-low trigger force eliminates surface and form damage that is suitable for inspecting delicate workpieces.

Read More »
New Pilot V8 Next> Series Flying Probe Systems Measure Signals at Frequencies over 1.5 GHz
Dimensional Measurement & Inspection Probes

New Pilot V8 Next> Series Flying Probe Systems Measure Signals at Frequencies over 1.5 GHz

Pilot V8 Next> Series Flying Probe Systems are available in HR and XL versions and are capable of hosting from 1 to 12 magazines of boards to be tested. System provides up to 20 mobile resources for testing electronic board. HR version is used for probing miniaturized devices down to 30 µm whereas the XL version comes with work area measuring 800 x 650 mm that accommodates extra-large boards....

Read More »
SFP2 Measurement Probe improves surface finish measurement ability.
Dimensional Measurement & Inspection Probes

SFP2 Measurement Probe improves surface finish measurement ability.

SFP2 Measurement Probe is designed for REVO 5-axis measurement system on CMMs. The probe offers the system with multi-sensor capability and high-speed tactile scanning. System is managed using I++ DME compliant interface and Renishaw's MODUSTM metrology software. REVO can simultaneous control the motion of three machine and two head axes with collection of workpiece data. System can be used...

Read More »
Dimensional Measurement & Inspection Probes

FARO® Partners With Siteco Informatica to Launch a Breakthrough in Affordability and Flexibility for Mobile Mapping Applications in Construction

LAKE MARY, Fla. - FARO® (NASDAQ: FARO), the world's most trusted source for 3D measurement and imaging solutions for factory metrology, product design, construction BIM/CIM, public safety forensics and 3D solutions and services applications, announces an extended partnership with Siteco Informatica to bring affordable mobile mapping, using FARO Focus3D Laser Scanners, to users...

Read More »
Universal Touch Probe reduces SKU inventory, enhances versatility.
Dimensional Measurement & Inspection Probes

Universal Touch Probe reduces SKU inventory, enhances versatility.

Model TS 642 is offered as universal replacement for all TS 6xx series touch probes. Original transceiver can remain in machine, all original cables can be used, and styluses are also compatible. After exchange, existing taper shank can continue to be used as well. While properties correspond to known touch probes, product offers service life of at least 5 million probes, flexible battery...

Read More »
Non-Contact Vision Probe enhances REVO measurement capabilities.
Dimensional Measurement & Inspection Probes

Non-Contact Vision Probe enhances REVO measurement capabilities.

Intended for use with REVO® 5-axis measurement system on co-ordinate measuring machines (CMMs), RVP increases multi-sensor capability by adding non-contact inspection to existing touch-trigger, high-speed tactile scanning and surface finish measurement capability. Thin sheet metal parts or components with large numbers of holes as small as 0.5 mm as well as parts not suitable for tactile...

Read More »
Scanning Probes support 3D CMM tactile scanning.
Dimensional Measurement & Inspection Probes

Scanning Probes support 3D CMM tactile scanning.

Supporting stylus lengths up to 225 mm, HP-S-X1 Series measures surface features of complex parts, as well as bores or holes deep inside workpiece, saving time during inspection process. Magnetic interfaces allow for automated stylus changes on CMM. Probe range supports all standard inspection modes including dynamic single-point contact measurement, self-centering measurement, and continuous...

Read More »
CMM Systems offer end-to-end inspection solutions.
Dimensional Measurement & Inspection Probes

CMM Systems offer end-to-end inspection solutions.

Integrating with MetraSCAN 3D optical CMM scanner and HandyPROBE Next arm-free portable CMM, VXinspect dimensional inspection software is intended for manufacturing companies that conduct first article inspection and complete quality control on production line or shop floor. Multi-function buttons on CMM systems enable users to directly interact with software right from devices. With single-click...

Read More »
Video Borescope features 1.8 mm working channel.
Dimensional Measurement & Inspection Probes

Video Borescope features 1.8 mm working channel.

Featuring tungsten braided probe with 6.5 or 10 ft working length, IRis DVRx-WC can operate as visual inspection device and repair tool. Optional alligator jaw, magnet, and measurement device can reach area under inspection through 1.8 mm working channel. With SDHC memory cards, users can store image and video files. Additional features include 4-way articulation with 360° rotation, 5 in....

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics