Receive industry and products news from the market categories that matter to you most.
Stay up to date on industry news and trends, product announcements and the latest innovations.
Chemical Process Controls & Controllers
Floors take a beating during the winter months because of all the ice melt and salt used on outdoor walkways. To protect floors, Avmor has developed EP88 CAPRICE Neutralizer and Salt remover.
EP88 CAPRICE neutralizes alkaline residues and removes salt and calcium deposits on most floor surfaces, even industrial carpeting. It can even be used to neutralize any residue left by chemical... Read More
Suitable for treating very high flows in pipelines, large tanks, or treatment ponds, Model 5000B features external manifolds with Dif-Jet™ gas injectors that inject CO2 directly into circulating wastewater to lower pH. Non-fouling gas injectors do not produce back pressure over time and will last indefinitely. Powered by submersible pump, Model 5000B is controlled by PLC that is programmed to... Read More
KIEV –Â Westinghouse Electric Company today announced that it has been awarded a contract by the National Nuclear Energy Generating Company of Ukraine (NNEGC Energoatom) to provide a passive hydrogen control system for VVER Units 1 and 2 at the Zaporizhia Nuclear Power Plant in Ukraine. The passive hydrogen-control system is designed to provide additional measures for ensuring containment... Read More
Wastech Controls and Engineering, Inc. Offers Engineered Solutions for Acid Dilution and Blending, and Acid Waste NeutralizationAug 30, 2012
CHATSWORTH, Calif. - Wastech Controls and Engineering, Inc., designs and manufactures solutions for industrial acid dilution and blending, as well as acid waste neutralization. Industries often need to adjust the strength of acids to meet their process requirements, as well as to treat the resulting wastes to neutralize the acids. Wastech engineers systems that complete these tasks effectively... Read More
When the Clean Water Act was enacted, one of the intentions of this legislation was to reduce the untreated industrial waste water burden on publically owned waste water treatment plants (POTW) so that industrial wastewater would only load the treatment plant to the same extent as ordinary household sanitary waste. Industrial facilities that generated process wastewater had to begin pre-treatment... Read More
Able to treat up to 2,700 gph of process water, Model 5000SP uses safe CO2 gas to lower pH and can be equipped with peristaltic chemical feed pump to inject alkaline solutions to raise pH. Design uses owner-furnished tanks, basins, lagoons, or sumps and does not require mixer in treatment tank. Depending on water quality required prior to discharge, onboard cartridge filter may be used with or... Read More
Poli-Cut pH control system lowers pH of process water produced in concrete polishing, grinding, and cutting operations so that water can be safely discharged without polluting environment. Self-contained, automated machine utilizes CO2 gas that is diffused and injected into wastewater to lower pH to 7.0. Mounted on 5 in. polyurethane swivel casters, product has 200 gal tank with 2 in.... Read More
Accepting 2 electrode signals in any combination of pH and ORP, WDP400 Series dual input pH/ORP controllers suit industrial, commercial, and municipal water treatment applications. There are 4 control outputs, available as on/off control relays, or as pulse proportional outputs to directly drive electronic metering pumps. Each control output can be assigned to either electrode, and relays can be... Read More
Don't miss the latest news!
Norcross MP2000 Viscosity Controller has 60 settings to accommodate solvent- or water-based products. It provides level, field-selectable on/off, or proportion control as well as password protected programming. Capable of displaying in piston time-of-fall seconds, Zahn or Shell Cup seconds, or centipoises, single-loop controller can be recalibrated while operating. It also features sealed keypad... Read More
Manufactured in NEMA 4X polycarbonate enclosure, PHUCN600 and PHUTX600 Series measure pH, ORP, or conductivity. Multi-parameter, microprocessor-based controller, PHUCN600, has LED numeric display with bar graph on outside front panel and 2-line, 16-character LCD on inside. User menu is divided into Calibration, Utilities, Setup, Diagnostics, and Output categories. As 1/4 DIN, 2-wire transmitter,... Read More
Series W305 pH/ORP controllers support 1 or 2 sensors in any combination of pH or ORP. Digital inputs for each sensor input channel prevent control based on stagnant samples or empty tanks, while control output limit timers prevent runaway chemical addition. Rated NEMA 4X, Â½ DIN controllers offer optional calibration reminder, automatic probe wash, and automatic buffer recognition. They have 5... Read More
WebMasterÂ® GI General Industrial Controller combines pH/ORP and conductivity products with WebMasterÂ® communications platform. ShoulderTapÂ® Server-On-Demand technology allows real-time access to system parameters. Controller delivers e-mail notifications for alarms and system summaries. It offers 4 sensor inputs, 8 analog inputs, 9 digital inputs, 4 analog outputs, and 8 relays.... Read More
Offered in prewired NEMA 4X wall mount package, WDP Series controllers accept 2 electrode signals in any combination of pH and ORP. Their 4 control outputs may be used as on/off control relays or pulse proportional outputs. Each control output can be assigned to either electrode, and relays can be either high or low set point, high or low alarm, in-range or out-of-range alarm, or probe wash.... Read More
Family consists of Series 63, with true predictive and reactive diagnostics; Series 53, full-featured analyzer; and panel-mounted Series 33, designed for OEMs. All versions accept differential sensors, conventional electrode pairs, and combination electrodes. Series 63 and 53 simultaneously display pH and process temperature on backlit LCDs. Options include multiple analog outputs, relays, and... Read More