Synchronous Buck Controllers feature adaptive on-time control.

Operating over input supply range of 3-28 V, Hyper Speed Control(TM) MIC2164/-2/-3/C supply 25 A output current and offer switching frequency of 300 kHz, 600 kHz, and 1 MHz, respectively. UVLO feature ensures proper operation under power-sag conditions to prevent external power MOSFET from overheating, while 6 ms internal soft start minimizes inrush current. Housed in 10-pin MSOP, controllers...

Read More »
RISC Microcontroller features integrated IR transceiver.

RISC Microcontroller features integrated IR transceiver.

Operating from 1.7-3.6 V external supply, 16-bit MAXQ613 can be powered directly from two AA cells. Unit includes USART, SPI(TM) master/slave communication port, IR module with carrier-frequency generation, and up to 24 general-purpose I/O pins. Secure memory-management unit prevents device cloning and unauthorized access to sensitive application code. Available with 48 KB Flash and 1.5 KB SRAM,...

Read More »
Motion Control System targets labeling operations.

Motion Control System targets labeling operations.

Fully compatible with in-plant job management systems, Genesis provides variable and multi-shape label inspection, intuitive defect management, as well as missing label and matrix detection. Real-time processor simultaneously handles critical functions, while automatic repeat detection and sensor calibration facilitate setups. Along with independent lane configuration, system features reporting...

Read More »
Water Treatment Systems remove arsenic, iron, and manganese.

Water Treatment Systems remove arsenic, iron, and manganese.

Intended for small water systems, SORB 33® ARS Series and Omni-SORB(TM) IRS Series are designed to treat arsenic, iron, and manganese contamination in potable water in 5 vessel sizes from 3.5-7 ft dia. SORB 33ARS Series uses Bayoxide®E33 arsenic removal media to reduce arsenic contamination to non-detect levels. With rated media life of 8 years, chemical-free Omni-SORB IRS Series offers...

Read More »
Drive Module supports 5 axes of brushed/brushless motors.

Drive Module supports 5 axes of brushed/brushless motors.

Measuring 120 x 140 x 20 mm, 5-Axis Drive Card operates with NYCe4000 motion control system, which controls applications in semiconductor, solar, and metrology industry. Card uses PWM amplifiers that handle up to 70 W and can be configured to accommodate brushed or brushless motors. Tight integration of I/O with drive allows functions such as high-speed position capturing, laser synchronization,...

Read More »
Electrically Driven Slide suits precise positioning tasks.

Electrically Driven Slide suits precise positioning tasks.

Suited for small-footprint, pick-and-place applications, MSC-EL mini-slide comes in 2 sizes, can be ordered in standard lengths, and is capable of travel to any position from 50-150 mm. Maintenance-free unit offers CamoLINE connectivity, accelerating connection. Powered by brushless, 24 Vdc motor, slide is built with belt drive gear, ball screw assembly, and ball rail system. Respective max loads...

Read More »
Rad-Hard Reconfigurable FPGAs suit space applications.

Rad-Hard Reconfigurable FPGAs suit space applications.

Built on second-generation ASMBL(TM) column-based architecture, Xilinx® Virtex®-5QV FPGAs integrate flexible 36 Kbit/18 Kbit block RAM/FIFOs and PCI Express(TM) compliant integrated Endpoint blocks. Devices offer 130,000 logic cells, 320 DSP slices supporting fixed and floating point operations, and 836 user I/Os, programmable to more than 30 different standards. With 18 channels of 3 Gbps...

Read More »
Widescreen Industrial Monitor serves as LCD HMI.

Widescreen Industrial Monitor serves as LCD HMI.

Fully ruggedized with IP65 protection rating, 19 in. Simatic® SCD1900 is suitable for deployment directly on machines. Unit eliminates compatibility problems with PC video drives that have 16:10 widescreen resolution format at max of 1,440 x 900 pixels with automatic VESA standard scaling. Available with or without touch screen interface, monitor is equipped with both VGA and DVI interfaces. It...

Read More »
TEDS Interface Kit supports IEEE 1451.4 compliant sensors.

TEDS Interface Kit supports IEEE 1451.4 compliant sensors.

Enabling communication with TEDS sensors over USB port of Windows PC, Model 400B76 features graphical interface that allows user to read TEDS from, and write TEDS to, sensors with single mouse click. Principle types of transducers supported include single axis and triaxial accelerometers, impact hammers, impedance heads, charge amplifiers, microphones, and microphone preamplifiers. Kit is...

Read More »
Droplet Starter System enables high-throughput experimentation.

Droplet Starter System enables high-throughput experimentation.

Operating over flow range of 0.1 -µl/min to 10 ml/min, modular Syringe-Based Droplet Starter System enables users to produce more than 10,000 monodispersed droplets/sec, ranging from 20-250 -µm diameter. System includes range of Droplet Junction Chips with different geometries, channel sizes, and surface properties, enabling formation of both water-in-oil and oil-in-water droplets. Using 2...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics