Electrical Regulators

Boost Switching Regulator targets HDTV tuner applications.

With max output voltage of 35 V and switch current of more than 350 mA, Model MIC2619 can power most high-voltage bias applications, such as TV tuners. Unit implements constant frequency 1.2 MHz PWM current-mode control scheme and includes programmable overvoltage protection in case of fault condition. Housed in Thin SOT-23 6-pin package, IC has operating junction temperature of -40 to...

Read More »
Controls and Controllers

Programmable Controller IC provides intelligent motion sensing.

Housed in 3 x 3 x 1 mm package, 14-bit Xtrinsic MMA9550L extends 3-axis accelerometer functionality with programmable core and on-chip memory to enable advanced motion sensing. Unit manages multiple sensor inputs and can perform intelligent, system level decisions within application. Up to 12 inputs are consolidated by sensing hub of unit, which operates with slave port configurable as IIC or...

Read More »
Low-Power MCU adds authentication to any application.
Controls and Controllers

Low-Power MCU adds authentication to any application.

Supplied in 16-pin TQFN package, MAXQ1004 integrates random-number generator and AES encryption engine supporting 128-, 192-, and 256-bit key sizes. These features enable secure authentication and communication schemes while resisting analytical and cryptanalysis attacks. Along with 16 KB integrated flash memory and communication options such as SPI(TM) and 1-Wire® interfaces, MCU offers...

Read More »
Controls and Controllers

Hot Swap Controller protects low power boards.

Integrating power MOSFET and sense resistor, 5 A Model LTC4219 protects boards with load supply voltages from 2.9-15 V, allowing boards to be safely inserted and removed from live backplane. During start-up, inrush currents are controlled by limiting gate ramp rate to 0.3 V/ms. Load current is monitored using voltage sensed across internal 7.5 mW sense resistor and adjusting internal 33 mW MOSFET...

Read More »
Power Supplies

DC/DC uModule Regulator delivers 15 A from inputs down to 1.5 V.

In 15 x 15 x 4.32 mm LGA package, LTM4611 integrates main DC/DC power circuit and gate drive circuit plus inductors, MOSFETs, input and output bypass capacitors, and compensation circuitry. Switch mode DC/DC uModule® point-of-load (POL) regulator can generate its own 5 V N-channel MOSFET gate drive for voltage conversion from 3.3 VIN or less to loads as low as 0.8 V at up to 15 A....

Read More »
Controls and Controllers

CNC Control supports 5-axis tool grinders.

Suited for OEMs and retrofit CNC control applications, Series 8 CNC integrates probing, grinding, and wheel dressing features into operator interface. Control supports MTS Tool Kit software, which provides integrated CAD/CAM solution for variety of tools and allows 3D modeling and simulation of tool grinding process. Additional features include data collection, machine network connectivity, and...

Read More »
Controls and Controllers

Downloadable Controller adds EtherNet/IP connectivity to designs.

Centered on fido® communication controller, which handles all EtherNet/IP traffic, RapID Platform can be used as network processor alongside any host microcontroller. Ethernet physical interface includes protection circuitry, bicolor LEDs, and magnetics integrated in connector. Achieving EtherNet/IP packet interval of 1 ms, RapID Platform supports full CIP Specification including Identity,...

Read More »
Vision Module adds Camera Link connectivity to FPGAs.
Electronic Boards

Vision Module adds Camera Link connectivity to FPGAs.

Together with NI FlexRIO field programmable gate array board, NI 1483 Camera Link Adapter Module offers solution for embedding vision and control algorithms directly on FPGAs. Module supports base-, medium-, and full-configuration Camera Link devices as well as 80-bit 10-tap configurations, all up to 85 MHz. In addition to modular I/O and industrial communications options for PXI platform, unit...

Read More »
Controls and Controllers

FANUC CNC America's iPad Giveaway at IMTS Booth #S-8919

HOFFMAN ESTATES, IL - FANUC CNC America is enhancing productivity through the use of FANUC CNC innovative and reliable CNC controls. Go to FANUC CNC America's IMTS Booth #S-8919 to register for a chance to win an iPad. A total of six iPads will be given away. One winner will be drawn from each day's registrants; one entry per person. Winners will be notified after IMTS. FANUC CNC America will...

Read More »
Scale Controller monitors water treatment chemicals.
Controls and Controllers

Scale Controller monitors water treatment chemicals.

Used with drum, tank, platform, ton cylinder, and spill containment scales, Scaletron Model 1020(TM) 5-Digit Controller helps insure operator and plant safety by providing critical data needed to determine chemical usage. Unit is available with 1 or 2 channels, each with 4-20 mA, and can be configured to simultaneously monitor levels in 2 separate containers. For protection from chemicals,...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers