HED CANects come with 4GB of eMMC Flash Memory.
Modules

HED CANects come with 4GB of eMMC Flash Memory.

Available in CL-T05 (Wi-Fi), CL-T06 (GSM) and CL-T07 (Wi-Fi & GSM), CANect® M2M and IoT Modules are designed with i.MX 6UltraLite Cortex®-A7 Core (696MHz) Microprocessor. Featuring 128 MB DDR3 RAM and USB 2.0, units are used to collect and transmit vehicle data through CANect View®, Reflector®, Portal® and Composer® applications.

Read More »
PAX®2C PID Controllers feature large LCD display.
Controls and Controllers

PAX®2C PID Controllers feature large LCD display.

Operated with DC current, DC voltage, process signals thermocouples and RTD inputs, PAX®2C PID Controllers are enabled with Ramp Soak functionality and FlexCard™ plug-in options such as heater current monitor and second process input card. Enabling 20 step changes for adjusting temperature, controllers come with 16 alarms and built-in USB programming port. PAX2Cs are suitable for automation in...

Read More »
Graphite HMI Platform comes with DNP3 network protocol.
Interfaces

Graphite HMI Platform comes with DNP3 network protocol.

Featuring aluminum construction, Graphite Human Machine Interface Platform is embedded with Crimson® software for enabling users to monitor and control through PCs, tablets or smartphones. Supported by DNP3 network protocol, Graphite HMI is enabled to provide remote access, data logging and alarming capability to display data in indoor or outdoor applications. Graphite HMI platform is ABS, ATEX...

Read More »
L-402 Linear Positioning Stage comes with crossed roller bearings.
Positioners

L-402 Linear Positioning Stage comes with crossed roller bearings.

Used in micromanipulation, test systems, and opto-mechanical alignment automation applications, L-402 Linear Positioning Stage is equipped with direct drive stepper motor or a DC-servo/ gearhead and rotary encoder. Designed with 0.12µm resolution and 0.5µm repeatability, unit offers velocity to 5 mm/sec and has half inch travelling range. L-402 features 22.5 mm wide XY and XYZ stack...

Read More »
Watlow Receives UL® Certifications for Hazardous and Non-Hazardous Locations on Select WATCONNECT® Control Panels
Control Panels

Watlow Receives UL® Certifications for Hazardous and Non-Hazardous Locations on Select WATCONNECT® Control Panels

St. Louis, MO – Watlow®, an industry leader in the design and manufacture of complete thermal systems, recently announced that it received UL® approval on four models from the new WATCONNECT® line of control panels. The C2, C3, C4 and C5 panels are now certified for hazardous and non-hazardous locations, and they are available for immediate order and shipment. The C2 is the small...

Read More »
FS700 Qseven Module comes with 1.0 GHz SoC processor.
Modules

FS700 Qseven Module comes with 1.0 GHz SoC processor.

With less than 5W of power consumption, FS700 Qseven Module is configured with 1GB or 2GB of DDR3 system memory and up to 16GB of eMMC Flash memory. Featuring HDMI graphics with resolution up to 1920 x 1200 and dual LVDS interfaces with up to 2560 x 1600 at 60Hz resolution, FS700 is designed with video, 2D graphics and 3D graphics processors, I/O interfaces of RS-232, LAN and 4x USB 3.0 and...

Read More »
HEC-P6000 Controllers feature user configurable analog inputs.
Controls and Controllers

HEC-P6000 Controllers feature user configurable analog inputs.

Programmed using Ladder Diagram, Function Block, and Structured Text, HEC-P6000 Controllers come with high I/O count with 14 digital inputs, 3 high speed counter inputs, quadrature encoder interface and 14 digital outputs rated for 2A each. Supporting MODBUS RTU/ASCII protocols, controllers are operated with 8-32 VDC supply voltage in -40°C to +80°C temperature range. HEC-P6000s are designed...

Read More »
828D CNC Controllers are equipped with software version 4.7.
Controls and Controllers

828D CNC Controllers are equipped with software version 4.7.

Capable of controlling milling machines with up to eight interpolating axes or spindles, 828D CNC Controllers support machine tool builders in designing compact grinding machines with up to ten axes and two machining channels. Used for milling, turning and grinding machine applications, controller can transfer contour elements directly from DXF file via contour detection into programming of...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics