MINI Analog Pro Signal Splitter can isolate inputs and outputs to 3 kV.
Power / Signal Splitters

MINI Analog Pro Signal Splitter can isolate inputs and outputs to 3 kV.

Offering maximum of 600 Ω load per output, MINI Analog Pro Signal Splitter duplicates the analog input value. Accepting analog signals in 0-12 V DC and 0-24 mA ranges, the output can be configured within 0-10.5 V DC and 0-21 mA ranges independently. Providing fine 0.01 mA and 0.0005 V output increments, the splitter comes in a 6.2 mm wide housing. Units can be operated in -40 to +70 degrees C...

Read More »
DC Switching Regulators offer MTBF of 2,000,000 hours.
Electrical Regulators

DC Switching Regulators offer MTBF of 2,000,000 hours.

Available in VX78 500, VXO78 500, VX78 1000, and VXO78 1000 series, DC Switching Regulators are operated in temperature range from -40 to +71°C. Offering 500 mA and 1 A output current options, units come in 3 pin SIP footprint. Featuring continuous short circuit protection, low ripple and noise, products come with output voltages of 3.3, 5, 9, 12, or 15 Vdc. Suitable for portable devices,...

Read More »
RSB5152 USB 2 Channel 5Amp SPDT Relay Module
Modules

RSB5152 USB 2 Channel 5Amp SPDT Relay Module

J-Works. Inc has start shipping RSB5152 series of single pole, double throw (SPDT) 2 channel 5 Amp relay modules controlled over the USB. The SPDT relay outputs provide host USB control between common line and normally open or closed relay contacts using on-board screw type terminals. The relays are rated at 5A @ 250VAC, 24VDC. According to Paul Ryan, Applications Engr at J-Works "This small form...

Read More »
Finding the Right Weather Monitoring System for Solar
Monitoring Systems

Finding the Right Weather Monitoring System for Solar

Optimizing a solar plant to achieve maximum return is a challenge. Columbia Weather Systems tackles environmental monitoring. Weather data accumulation is recorded accurately and is easily monitored remotely. Three weather station configurations are highly customizable and are designed to be adaptable to the specific needs of a solar plant. All three packages are high-quality weather stations...

Read More »
IO-Warrior56 USB I/O Controller supports alphanumeric and graphic LCD modules.
Controls and Controllers

IO-Warrior56 USB I/O Controller supports alphanumeric and graphic LCD modules.

Offering 8-channel 14-bit A/D converter and 16-bit PWM generator, IO-Warrior56 USB I/O Controller is available as 56-pin IC, PCB module or as starter kit. Delivering sample rate of 7800Hz when running in single channel mode, unit’s PWM generator uses an internal 1kHz, 250kHz, 2MHz, or 48MHz clock and generates output signal up to 12MHz. Designed with USB, I2C master, 50/100/400kH and SPI master...

Read More »
Multi-Process Module by EMAG ECM: Electro-Chemical Efficiency Lifts Automotive Mass Production to a New Level
Modules

Multi-Process Module by EMAG ECM: Electro-Chemical Efficiency Lifts Automotive Mass Production to a New Level

The idea behind the "platform strategy" in automotive production is as simple as it is effective: The manufacturers no longer construct completely unique engines, transmissions, and components for every model, but instead use numerous "common components" for similar vehicles. This results in a massive increase in unit volumes, and a decrease in the development and unit costs. However, the...

Read More »
The Dynapar OnSite™ Condition Monitoring System Delivers Feature-Rich Performance at a Surprisingly Affordable Price
Monitoring Systems

The Dynapar OnSite™ Condition Monitoring System Delivers Feature-Rich Performance at a Surprisingly Affordable Price

Gurnee, Illinois – The Dynapar OnSite™ Condition Monitoring System is changing what it means to track machine health. Designed to deploy in minutes, the four-sensor device combines affordable, remote 24/7 condition monitoring with cloud-based analytic software for multi-stakeholder access. Today’s lean market puts ever greater emphasis on maximizing uptime. Savvy plant managers, reliability...

Read More »
2WIRE Decoder Module eliminates need of grounding.
Decoders

2WIRE Decoder Module eliminates need of grounding.

Capable of converting 32-station ICC2 to 48-station two-wire system for hybrid multi-wire/two-wire system expansions, 2WIRE Decoder Modules can work with ICC2 models such as plastic, metal and pedestal cabinets. Units address signals and 24 VAC power are sent through same pair of two wires. Reducing labor and materials, product snaps directly into the controller module slot.

Read More »
Multi-Function Modules feature removable SMA connectors.
Modules

Multi-Function Modules feature removable SMA connectors.

Providing gain control, amplification, coupler and/or detection for ALC function, Multi-Function Modules are available in attenuator-amplifier-coupler-detector, coupler-sampler with multiple sample ports, and coupler-coupler-detector types. Used on printed circuit board based system, units come with improved isolation and available in different sizes. Modules are suitable for radar and microwave...

Read More »
SMARC 2.0 Module features high bandwidth LPDDR4 RAM.
Modules

SMARC 2.0 Module features high bandwidth LPDDR4 RAM.

Designed with low-power Atom™, Celeron® and Pentium® processors, SMARC 2.0 Module meet e.V. standards. Suitable for low-power ARM and x86 processors, unit comes with wireless options and comprehensive feature set. Operated in -40°C to +85°C temperature range, module improves performance-per-watt and new graphics capabilities.

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics