Plastic Control Valves feature bellows seals.

Plastic Control Valves feature bellows seals.

Model l000B series low-flow control valves, available with PTFE bellows seals are suitable for corrosive applications. They feature all-plastic construction, various Cv's, and pneumatic or electronic operation. Permeation-resistant PTFE bellows seal is designed for use in hazardous or corrosive environments; back-up stem seal packing arrangement is incorporated in each valve for additional...

Read More »
Position Control Sensors feature ASCII serial protocol.

Position Control Sensors feature ASCII serial protocol.

Temposonics® S Series ServoSensors combine sensor and embedded closed-loop position controller. ASCII protocol and Windows(TM) application setup software enable use of common translator software. Model SH rod style sensors are designed for internal mounting where high pressure conditions exist (5,000 psi continuous/10,000 psi spike). Model SP profile sensors are magnet-mounted and are used in...

Read More »
Motion Control Chip handles one stepping motor.

Motion Control Chip handles one stepping motor.

Single-axis PCD-4511, for two-phase unipolar or bipolar stepper motors, can output CW/CCW pulses or excitation signals directly to drive chips. It has sequence logic for full and half step modes, simultaneous start and stop, linear or S-curve acceleration and deceleration, idling pulse output for start, and various limit signals. Applications include semiconductor manufacturing, inspection...

Read More »
Thermoelectric Module includes communications port.

Thermoelectric Module includes communications port.

Model 5C-195 Thermoelectric Module/Heater Controller AC input-variable DC output voltage controller for thermoelectric modules can be used for either heating or cooling applications. It accepts input voltages of 110/220 VAC, 50/60 Hz, and incorporates internal power supply that provides adjustable load circuit voltages from 3 to 16 VDC. 2 ampere maximum output current limits range from load...

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »

Operator Interface is Ethernet-enabled.

OptoTerminal-G70 graphics-based operator interface is for use with company's SNAP Ethernet I/O and SNAP Ultimate I/O systems. It features 5.5 in. diagonal, 320 x 240 pixel, color touch screen; soft keys; and programmable speaker. Terminal is used to send commands and receive real-time data from plant floor equipment and other real world devices connected to hardware for purposes of automation,...

Read More »
Controllers come in 1/16 DIN package.

Controllers come in 1/16 DIN package.

Models 1601E and 1603E feature built-in programming port for remote or OEM configuration. They allow users to save multiple programs for each individual product or shipment. Product parameters can be stored and saved electronically in service department files for later reference. PID control algorithms can be field configured for variety of functions including control of pressure, flow and level,...

Read More »
Flow Control Cartridge regulates multiple hydraulic circuits.

Flow Control Cartridge regulates multiple hydraulic circuits.

FPC-10 provides precise flow regulation regardless of pressure differential. This makes it useful for circuits requiring constant flow under varying load conditions, such as multiple motor circuits working at different pressures where constant speed must be maintained on motors. It fits standard 10-2 generic cavity and has operating pressure of 0-3000 psi with flow rate of 0.5-6 gpm. Unit is...

Read More »
Contactor/Controller is available with load diagnostics.

Contactor/Controller is available with load diagnostics.

Model 7100S single-phase Solid State Contactor/SCR Power Controller is rated from 16 to 100 amps, 100 to 500 Vac with AC logic, DC logic or 4-20mA control input. It is suitable for fixed resistive heating applications such as plastic processes, environmental chambers, industrial ovens and infrared heating. Optional load diagnostics monitor SCR failure, total load failure, and partial load failure.

Read More »
Power Supply/Temperature Controller is rack mountable.

Power Supply/Temperature Controller is rack mountable.

SHPS8KW closed loop power supply and digital temperature controller powers all types of heaters including PGG or PBN Button Substrate Heaters. When used with Neocera heater assembly, it provides stability of better than ±1°C. Unit features 8 kW output power, Watlow Series 145 temperature limit with LED output status indicators, Type-K thermocouple, and SCR protection via 3 rear panel fuses.

Read More »
AC Drives plug into neworks.

AC Drives plug into neworks.

Allen-Bradley PowerFlex(TM) 700 AC drives offer adapters for NetLinx, DeviceNet, ControlNet, Universal Remote I/O, Profibus, and Interbus-S networks. Drives are available in power ratings from 0.5 to 40 hp at 400 to 480 V, and are configurable for volts-per-hertz and sensorless vector applications. They meet global power ratings, packaging requirements and industrial standards including CSA, cUL,...

Read More »

All Topics