Power Drive comes with safety vise.

Power Drive comes with safety vise.

Portable, electric, CSA-approved Model 700PD provides power for threading pipe and conduit up to 2 in. in diameter. It uses R12+ Segmental dies and dropheads or Ridgid(TM) 12R dies and dropheads. Model 700PD 1/2 HP drive is double insulated, with mechanical forward/reverse switch of 25 RPM. Switch is neoprene sealed to keep dirt out. Vinyl-coated vise handle provides electrical safety.

Read More »
Control Panel controls up to 25 valves.

Control Panel controls up to 25 valves.

Universal Control Panel works with electrically- or pneumatically-actuated valve systems. Control relay and expansion modules provide max of 20 digital inputs, 2 analog inputs, and 10 relay outputs rated to 10 A resistive. Panel functions include 8 timers, 8 counters, 4 real-time clocks with 4 channels per clock, and 8 display messages. Panel has main power disconnect switch. UL 489 circuit...

Read More »
Web Guiding System uses brushless DC stepper motors.

Web Guiding System uses brushless DC stepper motors.

Double E/Re web guiding system utilizes 3-zone system with zero point centered in dead zone. Dead zone is flanked by slow and standard zones. System adjusts web if it moves away from zero point into slow or standard zones in exact proportion to problem. DC stepper motor requires little or no maintenance. Options include digital microprocessor control panels and edge, center, and line guide...

Read More »
Dehumidifier controls humidity independently of temperature.

Dehumidifier controls humidity independently of temperature.

HCU desiccant dehumidification system treats 100 percent makeup air and works with existing A/C system or energy recovery ventilator (ERV). It controls humidity on as-needed basis, when humidity or temperature levels exceed set point. System removes humidity using combination of DX cooling and desiccant rotor. Nominal flow rate is 1000 scfm, with moisture-removal rate of 37.3 lb/hr at 90 degrees...

Read More »
I/O Card suits PC/104-based data acquisition.

I/O Card suits PC/104-based data acquisition.

Model 104-DIO-48S, 48-bit, parallel, digital input/output card operates in temperatures from 0 to 65 deg C. 48-channel board offers Change of State (COS) detection, determines data in one READ, and contains 2 type 82C55A Programmable Peripheral Interface chips (PPI). Each PPI provides two 8-bit ports on A and B and two 4-bit ports on C. Each of its 48 I/O lines is buffered and capable of sourcing...

Read More »
Modules provide direct AC input for sensor applications.

Modules provide direct AC input for sensor applications.

Ricos modules allow direct AC input for any sensor/initiator applications required to use AC at 115V or 230V. They enable 4 inputs in 1 unit. When used in conjunction with buscoupler, AC expansion modules have local force, lock, and trigger diagnostic features. Compatible with Profibus-DP, Interbus-S, DeviceNet, Ethernet and CANopen protocols, modules offer test points at each termination point,...

Read More »
Evaluation System checks control loop performance.

Evaluation System checks control loop performance.

Control Loop Performance Evaluation provides before and after analysis using bar graphs for comparison. Bars compare simulated control loops using current PID settings compared to new what-if PID settings. Performance bars show performance relative to optimal, with 100% being optimal. Robustness bars show how far away loop is from being unstable. Loop's PV filter is included in analysis, and...

Read More »
Machine Control comes on single PCI card.

Machine Control comes on single PCI card.

MachineLogic(TM) Slot Card Runtime has IEC 61131 programming languages, simultaneous communications between DeviceNet or Profibus fieldbus I/O and Ethernet I/O, and its own processor and real-time operating system for deterministic, real-time performance. Card continues to run even if host computer is re-booted. Programming is via MachineLogic environment that has 5 different IEC 61131 shop-floor...

Read More »
Variable Frequency Drives control ac induction motors.

Variable Frequency Drives control ac induction motors.

EagleDrive1(TM) Series and EagleDrive3(TM) Series provide variable speed control of single-phase and 3-phase motors, respectively. EagleDrive1 is available in 115 V and 230 V at power levels up to 1.5 hp. EagleDrive3 is available in 200-240 V at power levels up to 3.0 HP, and in 380-480 V at power levels up to 120 HP. Drives have pushbutton keypad, simple programming, 95% drive efficiency,...

Read More »
Position Controller works with valves and other devices.

Position Controller works with valves and other devices.

EMPC electronic controller is suited for company's valves, and can be adapted to other systems. It has adjustable setpoint, proportional band, PID and temperature offset, and provides operation within narrow bands with no hunting or overshooting. Compact controller is easy to set up and tune, and has no motors, gears, lead screws, or solenoids. Controller has 24 Vac/dc power input and output,...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics