DDR Memory Power Controller suits notebook applications.
Controls and Controllers

DDR Memory Power Controller suits notebook applications.

Offered in DFN-22 leadless package, NCP5214 integrates VDDQ and VTT termination voltages to help simplify motherboard design and save space in compact, portable computers. Light-load efficiency of 92% and shutdown current of less than 5 Â-µA help extend battery life. VTT termination voltage is supplied by linear regulator set to track one half of VDDQ voltage, which is supplied by...

Read More »
Heater Control Banks operate multiple heating zones.
Controls and Controllers

Heater Control Banks operate multiple heating zones.

HBC-EZ series features pre-installed controller wiring harness for single-phase, 3-phase/2-pole, or 3-phase/3-pole applications. Relays offer zero cross-switching, max output of 6 A/pole at 40°C ambient temperature, and input control voltage range of 4-15 Vdc for dc model and 90-140 Vrms for ac model. Mounted on DIN rail clip and measuring 3 x 9 in., controls are suited for use in plastics...

Read More »
Survey System is available with seismic stakeout program.
Miscellaneous Software

Survey System is available with seismic stakeout program.

System 1200 GPS is offered with seismic stakeout application software package that ensures field crews do not intrude on exclusion zones when placing seismic charges and sensors. After user enters predefined data set of exclusion zones into System 1200, system will provide audible warning whenever crews attempt to place stake in prohibited area, thereby avoiding damage to nearby water wells,...

Read More »
Voltage Regulator is used for DDR/QDR memory termination.
Electrical Regulators

Voltage Regulator is used for DDR/QDR memory termination.

Offered in 4 x 4 mm QFN and SSOP-24 packages, LTC3776 employs no RSENSE, constant frequency current mode architecture. This 2-phase, dual-output, synchronous step-down switching controller operates from 2.75-9.8 V input and features programmable switching frequency up to 750 kHz. Second output (VTT) regulates output voltage to 1/2 of VREF, while providing symmetrical source and sink output...

Read More »
Understanding Water Hammer
Sponsored

Understanding Water Hammer

DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.

Read More »
Motor Controllers and Drives

Regenerative AC Drive features single-unit design.

Compact, stand-alone, fully integrated 4-quadrant drive, ACS800-U11, incorporates active supply unit and built-in LCL filter to eliminate high-frequency harmonics. Harmonic performance lets drive help maintain power-supply quality as well as recover energy from process and feed it back into network. Rated from 7.5-125 hp, product incorporates NEMA Type 1 protection, flexible I/O, control panel,...

Read More »
Controls and Controllers

Temperature Controllers suit general-purpose applications.

Digital E5_N series includes Â-¼ DIN E5AN, 1/8 DIN E5EN, and 1/16 DIN E5CN models, which combine 3-phase heater burnout detection, parameter masking, and 2-step programmer. Front panel design has 3-color, 11-segment LCD for process value interpretation. Controllers, sealed to IP66, have flat membrane front and accept analog inputs for extended functionality in pressure, flow rate, level,...

Read More »
Control Cabinet I/O Extensions are rated to UL 94 V-0.
Modules

Control Cabinet I/O Extensions are rated to UL 94 V-0.

Sensor/actuator junction boxes in 757 Series safely extend control cabinet functions into field as well as locally on machine or process. Available with 4, 6, or 8 ports per box and 4 or 5 poles per port, IP 67/68 rated series features LED indication for power and signal status as well as connection point marking tags/holders. Master cable can be configured via M23 connector or pre-installed, and...

Read More »
Electronic Counter keeps track of applicator usage.
Motion Monitors

Electronic Counter keeps track of applicator usage.

Integrated into AMP applicators, EDGE Counter displays cycles since installation to track tool usage and optimize maintenance scheduling. On-counter LCD display and EDGE Counter Software Pack provide access to operation counts and other applicator statistics. Tool enables operators to perform applicator maintenance and tool replacement at measured intervals with pre-set limits. Counter and...

Read More »
Process Controller suits seam welding of thin gauge metals.
Controls and Controllers

Process Controller suits seam welding of thin gauge metals.

CSC MIG welding controller utilizes controlled short circuit gas metal arc welding process to clear short circuits by retracting wire from short. Controller syncronizes wire feeder actions with power supply current to continuously feed wire alternatly between forward and reverse directions. Process helps to increase travel speed and eliminate spatter on wide range of materials including steel,...

Read More »
USB External Port is suited for harsh environments.
Interfaces

USB External Port is suited for harsh environments.

Able to work with PC-based controls, Industrial External USB Port Model M168 lets user readily load, store, print, move, and/or back-up data from CNC or Industrial PC to solve task at hand. It comes with spring-loaded industrial PVC cover, USB type A connector, 6 ft cable to PC, mounting screws, and gasket. Unit supports USB devices such as memory sticks, floppy drives, hard drives, CD drives,...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers