Step-Down Regulator delivers 8 A in less than 350 mm².
Electrical Regulators

Step-Down Regulator delivers 8 A in less than 350 mm².

Using constant frequency, current mode architecture, synchronous buck regulator Model LTC3418 provides up to 8 A of continuous output current at voltages as low as 0.8 V from 5 x 7 mm QFN package. With efficiency up to 95%, unit operates from input voltage of 2.25-5.5 V, making it suited for single-cell Li-Ion or NiMH applications, as well as fixed rail systems. Switching frequency of 4 MHz...

Read More »
PLC is based on PLC on a Chip(TM) Technology.
Controls and Controllers

PLC is based on PLC on a Chip(TM) Technology.

Programmed using Divelbiss EZ Ladder software via dedicated communication port, ENHANCED Baby Bear PLC incorporates real-time clock, counter that operates up to 500 kHz, and 5 digital inputs and 5 relay outputs, expandable to 250 I/O. Optional ports include second communication port (RS-232/422/485) and 1 Mbit CAN port. Program with 75 rungs and 25 function blocks has scan time of approximately 1...

Read More »
Distributed I/O System offers Profinet interface.
Controls and Controllers

Distributed I/O System offers Profinet interface.

Simatic ET 200pro features IP65/67 protection and safety-relevant Industrial Ethernet communication using Profisafe profile. Actuators and sensors are connected via fail-safe I/O modules. With interface module, standard and fail-safe modules can be optionally integrated in Profibus or Profinet networks, where standard and fail-safe communication is carried out in parallel on one cable. ET 200pro...

Read More »
Fail Safe Components use Profibus and Profinet.
Controls and Controllers

Fail Safe Components use Profibus and Profinet.

Simatic CPU 317F-2 PN/DP fail-safe controller features Profibus and Profinet interfaces, while modular ET 200pro I/O system with IP65/67 protection includes fail-safe Profinet I/Os. Automation solutions for standard and safety-relevant tasks can be generated via Profinet and Profibus using Simatic S7 distributed safety engineering software. Solutions comply with IEC 61508, EN 954, and NFPA 79...

Read More »
Controls and Controllers

Weight Controller works with Omron Sysmac CJ1 series PLC.

Suited for weight based process control applications, F159 Plug-In Weigh Module provides direct connectivity to Omron CJ1 series PLC. Connectivity helps simplify setup of operation, reduce wiring and interfacing cables, and reduce system configuration and programming time. Offering data processing speed of 500 times/sec, unit can handle up to four 350 ohm load cells while providing up to 1/40,000...

Read More »
Electronic Boards

Interface Modules provide ASCII serial connectivity.

Models MVI56-GSC, MVI46-GSC, MVI71-GSC, and MVI94-GSC allow users to connect barcode readers, scanners, scales, printers, and terminals to Allen-Bradley platforms. Residing in Allen-Bradley racks, single-slot, backplane-compatible modules contain 2 application ports, which permit reception and transmission of data between processor and end devices. Both ports are active ASCII ports, sending and...

Read More »
Boiler Cut-Out Device offers upgrade kit.
Controls and Controllers

Boiler Cut-Out Device offers upgrade kit.

Series EA-100 Levalarm with upgrade kit replaces original float mechanism and micro switch with conductivity probe and detection relay, eliminating all moving parts. Relay provides 2 independent dry Form C switch contacts. Kit requires no welding, re-work of piping, or adjustments, and takes minutes to install.

Read More »
Voltage Regulators help maximize battery life.
Electrical Regulators

Voltage Regulators help maximize battery life.

Supplied in TO-220 SIP packaging, step-down Series 78SR is pin- and size-compatible with LM78xx devices. Three models offer outputs of +5 V/0.5 A, +12 V/0.4 A, and +3.3 V/0.5 A. Switching frequency of 260 kHz produces efficiencies as high as 95% for 12 V part and 85% for 3.3 and 5 V regulators. Offering full load operation from 9, 12, 24, 28, or 36 V supplies, at ambient temperatures as high as...

Read More »
Controls and Controllers

Hot Swap Controller protects load voltages fro 0-6 V.

Low voltage Model LTC4216 allows safe insertion and removal of boards from live backplane. Together with analog current limit amplifier, electronic circuit breaker with adjustable response time provides dual level overcurrent protection. Adjustable soft-start circuitry limits rate of change of inrush at start-up. Offered in 10-lead MSOP and 12-lead DNF packages, Model LTC4216 meets demands of...

Read More »
Controls and Controllers

Microcontroller features embedded programmable logic.

Fabricated using 130 nm CMOS technology, GreenFIELD STW21000 combines ARM926EJ-S MIPS RISC processor core, 16-Mbit on-chip eDRAM memory, eFPGA block, and range of analog and digital peripherals. Unit is available with on-chip multiple HDLC controllers, 10/100 Ethernet MACs, multi-channel serial port, and Power-On-Reset function. It is suited for feedforward and digital pre-distortion ratio...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers