New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Analog Controller suits fixed-point gas monitoring.

Appropriate for industrial and non-industrial applications, 2-channel Model 820 accepts one or two 4-20 mA input signals from any gas transmitter and displays reading on LED display. In addition to local interface, controller can be part of larger digital network using ModBus RTU protocol. It includes 5 programmable analog relays for alarm and fault conditions, and when alarm conditions are...

Read More »

DC/DC Controller powers UltraSPARC® and SPARC® processors.

Offering 45 A single-chip solution, PolyPhase-® synchronous step-down controller, Model LTC3819, features 4 integrated MOSFET drivers and on-board 5-bit digital interface. Core voltage is from 1.025-1.4125 V in 12.5 mV steps and core current ranges from 15-40 A. Housed in 10-pin MSOP package, device operates at up to 90% efficiency from input voltage of 4.5-36 V, and includes current foldback,...

Read More »
Step Down Regulator features 4 MHz switching frequency.

Step Down Regulator features 4 MHz switching frequency.

Using constant frequency, current mode architecture, Model LTC3412A can deliver up to 3 A of continuous output current at voltages as low as 0.8 V from 4 x 4 mm QFN package. It operates from input voltage of 2.25-5.5 V, making it suited for single cell Li-Ion or NiMH applications. Synchronous buck regulator uses internal switches with RDS(ON) of 0.065 and 0.077 ohms to deliver efficiencies up to...

Read More »

Buck Regulator offers PWM switching frequency to 500 kHz.

Integrating 75 V N-channel MOSFET and emulated, current-mode PWM, Model LM5005 steps down input voltage from 7-75 V to produce regulated 2.5 A power supply, adjustable from 1.225-65 V. Current-mode control provides inherent line voltage feed-forward and loop compensation. Bi-directional oscillator synchronization pin allows multiple LM5005 regulators to self-synchronize or switch synchronously...

Read More »
Servo Drives communicate in real-time via Ethernet.

Servo Drives communicate in real-time via Ethernet.

Suited for machine manufacturing in power range from 400 W to 64 kW, bus-capable ACOPOS Servo Drives support operation of all standard motor types. With Ethernet Powerlink network connection, it is possible to operate up to 240 axes on one line using same network. When controlling axes using multiplex operation, transfer speeds of 200 -µs are achieved. Extensive diagnostics functions are...

Read More »
Controller enables X-by-Wire technology for vehicle networks.

Controller enables X-by-Wire technology for vehicle networks.

Delivering 10 Mbps over 2 channels, application-specific FlexRay(TM) MB88121 provides fault-tolerant, deterministic data transmission, suitable for engine control, braking, and steering subsystems. It can be connected directly to existing CPUs and complements standard automotive buses, including CAN and LIN. Internal speeds reach 80 MHz with 4, 5, 8, or 10 MHz external oscillator, or by external...

Read More »

Cruise Control provides forward collision warning.

Using forward-looking, 76 GHz narrow-beam radar system, Forewarn-® Adaptive Cruise Control helps driver maintain selected time gap behind vehicle ahead. At highway speeds, if lane ahead is clear, system will maintain cruising speed set by driver. When slower traffic is detected, system maintains driver-selected headway, adjustable between 1.0-2.2 sec, using throttle control and limited braking....

Read More »
Flat Panel Controller supports multiple inputs.

Flat Panel Controller supports multiple inputs.

Multimedia and TV flat panel controller, CRTtoLCD-7 offers RGB and DVI inputs as well as composite and S-video inputs for PAL/NTSC signals. JILII30 interface allows control of single and double port LVDS-TFTs up to data width of 2 x 24 bits, while FLEX32 allows control of 18 bit-TTL flat panels. Controller uses OSD keypad for changing settings, and is optimally equipped for video sources such as...

Read More »

Open-Collector Relay Driver provides 96 channels.

Suited for driving and sensing external devices, Model SMP7500 features 12 groups of 8 bits, each group configured as input or output under program control or via front panel control line. I/O may be single buffered for real-time data access or double buffered to provide synchronized data. Each channel can sink 300 mA and includes built-in clamping diodes. Up to 192 channels can be accommodated...

Read More »

Power MOSFET Modules range from 50-600 A at TC = 80

Offered in SP3, SP4, and SP6 packages, 100 V MOSFET Modules are available in single switch, buck, boost, dual common source, phase leg, full bridge, asymmetrical bridge, dual boost, and dual buck configurations. With 12 mm height for SP3 package and 17 mm height for SP4 and SP6 packages, modules exhibit minimal internal parasitic resistance and inductance. Applications include motor control,...

Read More »

All Topics