Video Monitoring System features 2.4 GHz wireless link.

Video Monitoring System features 2.4 GHz wireless link.

RFWaves reference design uses 1 Mbps Model RFW122-M-PA DSSS half duplex transceiver as core component, along with power amplifier. Transceiver provides output power of 25 dBm and receiver sensitivity of -75 dBm while delivering real-time MPEG-4 compressed video. Specified operating range is 100 m indoors and 300 m outdoors. Multiple remote cameras can be connected to single base unit, and each...

Read More »

Rack-Mount System offers multi-circuit switching protection.

In case of line or equipment failure, T-APS-R-15 chassis and T-APS-R card system provides automatic failover switching protection for sites with up to 15 complete, independent primary, and redundant T-1 or E-1 circuits. System, also manageable via SNMP, Telnet, or serial interface, enables switches can be used in several configurations. Each card operates independently, monitoring T-1 or E-1...

Read More »
SSI Interface works with ControlLogix PLC platform.

SSI Interface works with ControlLogix PLC platform.

Suited for rotary, linear, and laser position sensing, 4-channel 7264 SSI interface module plugs into PLC for immediate performance. It is configurable directly from PLC's output registers for variety of sensors and unique data interface requirements. Resolution is limited to that of corresponding SSI sensor, and each module provides user with scaled data, actual SSI data, and velocity data....

Read More »

Servo Controller integrates programmable limit switch.

Delivering servo control of NEMA 17 and 23 frame microstep motors, SilverDust(TM) controller/driver features Programmable Limit Switch (PLS) output that can be configured to use any of the available 23 I/O to change states at over 150 pre-defined trigger points. A modulo may be selected to repeat cycle. Output triggering, trigger point values, and number of trigger points can be changed even...

Read More »
I/O System facilitates small machine control.

I/O System facilitates small machine control.

With modular Advantys(TM) OTB Distributed I/O System, users can create I/O islands managed by master controller, via fieldbus or communication network. System includes 3 communication bases for various types of fieldbus, CANopen, Ethernet TCP/IP, or Modbus-® RS485 serial line. At width of 55 mm, each communication base includes 20 I/O, totaling 12-24 Vdc inputs, 6 relay outputs, and 2-24 Vdc...

Read More »

I/O Expanders suit space constrained applications.

Utilizing NiPdAu RoHS-compliant finish, 16-Bit Configurable I-²C and SMBus I/O expanders, Models PCA9555, PCA9535, and PCA9539 provide general-purpose I/O expansion for most microprocessor families, allowing designers to save GPIOs for other functions. Model PCA9539 offers /RESET input, which can be used to initialize unit to its default state without de-powering it. All 3 devices are housed in...

Read More »

Stepper Module is compatible with distributed I/O network.

Designed for Allen-Bradley's Point I/O, stepper motor control module, Model 3401, has 2 sinking inputs, which can be used for homing and limit switch operations. Design allows I/O to be distributed throughout machine instead of being located in one central panel. Step and direction output signals interface to any of AMCI's SD stepper drives or SMD family of integrated stepper drive/motor packages.

Read More »
Isolated Digital I/O Card has 128-channel architecture.

Isolated Digital I/O Card has 128-channel architecture.

Featuring 64 outputs and 64 inputs, PCI-1758UDIO combination DIO card utilizes isolated I/O design that provides electronic protection from voltage spikes up to 2,500 Vdc as well as noise. It also provides debouncing capabilities and has I/O ranges that enable direct connection to sensors and actuators. Outputs are equipped with watchdog timer, and each digital input channel provides interrupt...

Read More »

Drive Packages are pre-engineered for industrial use.

Model ACS550-PC (packaged with circuit breaker) and Model ACS550-PD (packaged with disconnect) offer NEMA 1 and NEMA 12 solutions rated to 60 hp at 480 V and 30 hp at 240 V. Mounted directly onto machine or column on plant floor, drives include programmable control panel that continuously displays 3 parameters and facilitates parameter upload, download, storage, and transfer. While ACS550-PD...

Read More »

Motion Controller provides plug-and-play operation.

Single-axis stepper motor controller, CMS-100 CosmoNet, programs and employs local network connectivity between PC and motor-control system. Providing micro-processing capability from fully integrated USB 2.0 logic controller, standalone unit features EEP-ROM chip, transmittal program memories, 12 inputs, and 2 outputs. Modular architecture is designed for external device linking and can execute...

Read More »

All Topics