Nanopositioning Controllers offer 1-12 channels.

Intended for piezo-driven nanopositioning systems, modular Model E-621.CR features analog and networkable digital interfaces. It integrates low-noise piezo power amplifier, high-speed servo controller, and sensor electronics for absolute-measuring capacitive nanopositioning sensors. For position stability, 20-bit A/D and D/A converters are incorporated. Model E-621 can be operated stand-alone or...

Read More »

WLAN Chipsets support PCI and PCIe host interfaces.

Based on 802.11n draft specification, Series AR5008 delivers benefits of XSPAN(TM) with Signal-Sustain Technology(TM), which provides full potential of MIMO. Single-chip, triple-radio RF design is paired with MAC chip and delivers up to 300 Mbps physical data rate with end-user throughput of 150-180 Mbps. SST simultaneously transmits across 3 spatially diverse signal paths, and incorporates...

Read More »
I2C Power Supply Controller monitors dc-dc converters.

I2C Power Supply Controller monitors dc-dc converters.

Featuring intelligent digital power management, LTC2970 acts as dual I2C power supply monitor and margining controller. It provides digital control of analog power supplies in high-availability systems via its I2C digital interface, 14-bit ADC, and reference and current output DACs. Voltage-buffered, 8-bit DACs drive supplies' feedback nodes or can be programmed by linear voltage servo to trim...

Read More »

Step-Down Regulator offers I-grade temperature range.

Using constant frequency, current mode architecture, 4 MHz Model LTC3414 delivers up to 4 A of continuous output current at voltages as low as 0.8 V from thermally enhanced TSSOP-20 package. Synchronous buck regulator operates from input voltage of 2.25-5.5 V, making it suited for single cell Li-Ion or multi-cell NiMH applications. Operating from -40 to +85-

Read More »
Linear Regulator features low dropout voltage of 45 mV.

Linear Regulator features low dropout voltage of 45 mV.

With input voltage down to 1.7 V, 300 mA VLDO(TM) Model LTC3035 provides adjustable output voltage from 0.4-3.6 V. To allow operation at low input voltages, unit includes integrated charge pump converter that provides headroom for internal LDO circuitry. Output voltage accuracy of -

Read More »

Fume Hood provides minimum turbulence.

UniFlow SE Fume Hood utilizes aerodynamic face opening with airfoil to provide uniform and constant volume airflow into fume chamber. VaraFlow baffle system directs airflow to exhaust outlet with minimum turbulence. Featuring one-piece, unitized composite fiberglass superstructure, hood is fire retardant and chemical resistant. Units are available in 48, 60, 72, and 96 in. width, and 32 in. depth...

Read More »

Monitoring System profiles brazing furnaces.

With thermal barrier and data logger connected to survey arms, CAB (Controlled Atmosphere Brazing) Surveyor system helps ensure furnace meets conditions for optimum brazing. System captures baseline profile of furnace, and once baseline is achieved, limits are set to ensure conditions around profile are working within specification. Wizard driven software allows setup and analysis of profiles,...

Read More »

Wireless Radio transmits both analog and digital signals.

Utilizing FHSS technology, DIN rail mounted SCADALink SMX900 allows bi-directional communications for point to multi-point wireless I/O systems. Transceivers are powered by 12-30 Vdc, and I/O modules come in 4-point analog, 8-point discrete, and combinations of both. With MODBUS and Allen Bradley DF1 addressable I/O, built in RS232/RS485/RS-422 ports, and support for 254 slaves, user can set up...

Read More »
Brushless Motor Driver IC interfaces with DSP or MCU.

Brushless Motor Driver IC interfaces with DSP or MCU.

Targeted at brushless motors in fractional 1/3 hp range, Model SA305 is capable of 3-phase operation and features PWM for thermal efficiency. IC utilizes 3 independent half bridges to deliver up to 5 A output, or 10 A Peak, using industrial voltage supplies of 60 V. Housed in 23-pin staggered lead package, unit switches at frequencies up to 100 KHz. All 6 FETs in device can be accessed...

Read More »

Interface Module suits telecom edge access applications.

Multi-service Telum(TM) 1204-O3 AdvancedMC-® Module can interconnect between any supplied protocols as selected on per-port basis. Software configurable unit enables packet processing, directly terminating and switching traffic on card rather than sending it to off-board processor. Processing up to 750,000 packets/sec, module supports ATM and IP interworking, as well as local port-to-port...

Read More »

All Topics