ISL32704E RS-485 Bus Transceiver offers 4Mbps data transmission.
Transceivers

ISL32704E RS-485 Bus Transceiver offers 4Mbps data transmission.

Providing reliable data transmission in noisy environments, ISL32704E RS-485 Bus Transceiver comes with 15 kV ESD bus-pin protection and 2.5kVRMS isolation. Designed with thermal shutdown protection, unit uses PWM or RF carrier for transferring DC and low frequency signals across barrier. Operated in -40°C to +85°C temperature range with 3 to 5 V supply voltage, transceiver allows up to 32...

Read More »
ISL32704E RS-485 Bus Transceiver offers 4Mbps data transmission.
Transceivers

ISL32704E RS-485 Bus Transceiver offers 4Mbps data transmission.

Providing reliable data transmission in noisy environments, ISL32704E RS-485 Bus Transceiver comes with 15 kV ESD bus-pin protection and 2.5kVRMS isolation. Designed with thermal shutdown protection, unit uses PWM or RF carrier for transferring DC and low frequency signals across barrier. Operated in -40°C to +85°C temperature range with 3 to 5 V supply voltage, transceiver allows up to 32...

Read More »
L-402 Linear Positioning Stage comes with crossed roller bearings.
Positioners

L-402 Linear Positioning Stage comes with crossed roller bearings.

Used in micromanipulation, test systems, and opto-mechanical alignment automation applications, L-402 Linear Positioning Stage is equipped with direct drive stepper motor or a DC-servo/ gearhead and rotary encoder. Designed with 0.12µm resolution and 0.5µm repeatability, unit offers velocity to 5 mm/sec and has half inch travelling range. L-402 features 22.5 mm wide XY and XYZ stack...

Read More »
L-402 Linear Positioning Stage comes with crossed roller bearings.
Positioners

L-402 Linear Positioning Stage comes with crossed roller bearings.

Used in micromanipulation, test systems, and opto-mechanical alignment automation applications, L-402 Linear Positioning Stage is equipped with direct drive stepper motor or a DC-servo/ gearhead and rotary encoder. Designed with 0.12µm resolution and 0.5µm repeatability, unit offers velocity to 5 mm/sec and has half inch travelling range. L-402 features 22.5 mm wide XY and XYZ stack...

Read More »
Monitors

Workstation Monitor is calibrated with standards of NIST.

Eliminating need for periodic testing, WSMONITOR2 Plus Workstation Monitor is designed for monitoring single-wire wrist strap system. Featuring switch for disabling mat monitor circuit when not needed, product comes with shielded enclosure to stop false pass conditions. Meeting ANSI/ESD S20.20 Continuous Monitor standards, monitor comes with 100-240VAC power adapter with interchangeable plugs.

Read More »
Monitors

Workstation Monitor is calibrated with standards of NIST.

Eliminating need for periodic testing, WSMONITOR2 Plus Workstation Monitor is designed for monitoring single-wire wrist strap system. Featuring switch for disabling mat monitor circuit when not needed, product comes with shielded enclosure to stop false pass conditions. Meeting ANSI/ESD S20.20 Continuous Monitor standards, monitor comes with 100-240VAC power adapter with interchangeable plugs.

Read More »
WDP Passive Multiplexers do not need new fiber optic channels.
Multiplexers

WDP Passive Multiplexers do not need new fiber optic channels.

Addressing optical applications not compatible with active WDM technology, FiberPlex WDP Passive Multiplexers recover large portion of 400,000 GHz fiber optic cable. Product multiplexes 8 or 16 data channels onto pair of singlemode fiber by dividing into wavelengths. Suitable in campuses, data centers, telecoms and broadcast facilities. Product has virtually no bandwidth limitations due to its...

Read More »
WDP Passive Multiplexers do not need new fiber optic channels.
Multiplexers

WDP Passive Multiplexers do not need new fiber optic channels.

Addressing optical applications not compatible with active WDM technology, FiberPlex WDP Passive Multiplexers recover large portion of 400,000 GHz fiber optic cable. Product multiplexes 8 or 16 data channels onto pair of singlemode fiber by dividing into wavelengths. Suitable in campuses, data centers, telecoms and broadcast facilities. Product has virtually no bandwidth limitations due to its...

Read More »
Magnetic Mount Dual and Triple Band Antennas come with weather-proof enclosure.
Antennas

Magnetic Mount Dual and Triple Band Antennas come with weather-proof enclosure.

Available in TW7872 and TW7972 models, Magnetic Mount Antennas provide multi-path signal rejection. TW7872 is capable of receiving GPS L1/L2, GLONASS G1/G2 and TW7972 is capable of receiving GPS L1/L2/L5, GLONASS G1/G2/G5. Units feature magnetic mount, IP67 weather-proof enclosure with pre-tapped screw holes. TW7872 and TW7972 comes with pre-filter for protecting against intermodulation and...

Read More »
Magnetic Mount Dual and Triple Band Antennas come with weather-proof enclosure.
Antennas

Magnetic Mount Dual and Triple Band Antennas come with weather-proof enclosure.

Available in TW7872 and TW7972 models, Magnetic Mount Antennas provide multi-path signal rejection. TW7872 is capable of receiving GPS L1/L2, GLONASS G1/G2 and TW7972 is capable of receiving GPS L1/L2/L5, GLONASS G1/G2/G5. Units feature magnetic mount, IP67 weather-proof enclosure with pre-tapped screw holes. TW7872 and TW7972 comes with pre-filter for protecting against intermodulation and...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics