New PWPR-2K Picowatt Photoreceiver Provides Bandwidth from DC to 2 kHz
Receivers

New PWPR-2K Picowatt Photoreceiver Provides Bandwidth from DC to 2 kHz

FEMTO’s PWPR-2K Picowatt Photoreceiver is designed for cw-measurements and time resolved signal acquisitions. Unit can detect optical powers from about 100 fW up to 10 nW when used in combination with lock-in amplifiers. PWPR-2K Photoreceiver is available in Si and InGaAs models with wavelength ranging from 320 to 1700 nm. Unit offers a swithable gain of 10⁹ V/A, 10¹⁰ V/A and NEP ≤ 10...

Read More »
New PWPR-2K Picowatt Photoreceiver Provides Bandwidth from DC to 2 kHz
Receivers

New PWPR-2K Picowatt Photoreceiver Provides Bandwidth from DC to 2 kHz

FEMTO’s PWPR-2K Picowatt Photoreceiver is designed for cw-measurements and time resolved signal acquisitions. Unit can detect optical powers from about 100 fW up to 10 nW when used in combination with lock-in amplifiers. PWPR-2K Photoreceiver is available in Si and InGaAs models with wavelength ranging from 320 to 1700 nm. Unit offers a swithable gain of 10⁹ V/A, 10¹⁰ V/A and NEP ≤ 10...

Read More »
New AMC588 Transceiver Features On-Chip Programmable Digital Filters
Transceivers

New AMC588 Transceiver Features On-Chip Programmable Digital Filters

VadaTech’s AMC588 Transceiver is designed for SDR, SATCOM, 3G/4G micro and macro BTS, antenna systems, research and instrumentation. The AMC588 consists of four AD9371 modules connected to Virtex UltraScale+™ FPGA. With an operating frequency range of 300 MHz to 6 GHz, AD9371 module supports TDD and FDD operation. Unit is compatible with Analog Devices RadioVerse™ design tools and offers...

Read More »
New AMC588 Transceiver Features On-Chip Programmable Digital Filters
Transceivers

New AMC588 Transceiver Features On-Chip Programmable Digital Filters

VadaTech’s AMC588 Transceiver is designed for SDR, SATCOM, 3G/4G micro and macro BTS, antenna systems, research and instrumentation. The AMC588 consists of four AD9371 modules connected to Virtex UltraScale+™ FPGA. With an operating frequency range of 300 MHz to 6 GHz, AD9371 module supports TDD and FDD operation. Unit is compatible with Analog Devices RadioVerse™ design tools and offers...

Read More »
ComNet Introduces A Serial Data to Ethernet Terminal Server
Network Equipment

ComNet Introduces A Serial Data to Ethernet Terminal Server

ComNet’s Gen2 CNFE3DOE2/M is a serial data to Ethernet terminal server and media converter. It takes RS232, RS422 and RS485 serial data, converts it to IP, sends it over an Ethernet network and converts the data back at its destination. It controls remote hardware, allows simultaneous local and remote access, handles any combination of two serial data circuits inserted onto any Ethernet network...

Read More »
ComNet Introduces A Serial Data to Ethernet Terminal Server
Network Equipment

ComNet Introduces A Serial Data to Ethernet Terminal Server

ComNet’s Gen2 CNFE3DOE2/M is a serial data to Ethernet terminal server and media converter. It takes RS232, RS422 and RS485 serial data, converts it to IP, sends it over an Ethernet network and converts the data back at its destination. It controls remote hardware, allows simultaneous local and remote access, handles any combination of two serial data circuits inserted onto any Ethernet network...

Read More »
Smart Maintenance Mechanics Ensure Significantly Higher Uptime: Multitest Quick Lock for Test Sockets
Holders

Smart Maintenance Mechanics Ensure Significantly Higher Uptime: Multitest Quick Lock for Test Sockets

Rosenheim, Germany, May 2018: Multitest’s Quick Lock Contact Unit Holder (CUH) for ecoAMP and DuraKelvin Plunge-to-Board set-ups on the MT9928 gravity feed handler has been adopted as the standard mounting solution by one of Multitest’s largest automotive customers. Quick Lock demonstrated substantial reductions in maintenance, debugging, and repair times. The Quick Lock CUH allows for quick...

Read More »
Smart Maintenance Mechanics Ensure Significantly Higher Uptime: Multitest Quick Lock for Test Sockets
Holders

Smart Maintenance Mechanics Ensure Significantly Higher Uptime: Multitest Quick Lock for Test Sockets

Rosenheim, Germany, May 2018: Multitest’s Quick Lock Contact Unit Holder (CUH) for ecoAMP and DuraKelvin Plunge-to-Board set-ups on the MT9928 gravity feed handler has been adopted as the standard mounting solution by one of Multitest’s largest automotive customers. Quick Lock demonstrated substantial reductions in maintenance, debugging, and repair times. The Quick Lock CUH allows for quick...

Read More »
Piab's New Suction Cup Mount is Designed for Industry Standard End-of-Arm Tooling Connections
Mounts

Piab's New Suction Cup Mount is Designed for Industry Standard End-of-Arm Tooling Connections

Piab’s Suction Cup Mount comes with interchangeable parts for mix and match mounting system. Unit provides mounting options such as Universal joint, mount (2 x 8/10.5mm), Lock-pin (19mm), and Ball-joint. Offered in lengths from 45 to 200 mm, mount is designed for handling, for instance, automotive body parts or plastic details. Unit’s ball-shaped fastener comes with an optional mechanism and...

Read More »
Piab’s New Suction Cup Mount is Designed for Industry Standard End-of-Arm Tooling Connections
Mounts

Piab’s New Suction Cup Mount is Designed for Industry Standard End-of-Arm Tooling Connections

Piab’s Suction Cup Mount comes with interchangeable parts for mix and match mounting system. Unit provides mounting options such as Universal joint, mount (2 x 8/10.5mm), Lock-pin (19mm), and Ball-joint. Offered in lengths from 45 to 200 mm, mount is designed for handling, for instance, automotive body parts or plastic details. Unit’s ball-shaped fastener comes with an optional mechanism and...

Read More »

All Topics