New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Circuits

Digital-Terrestrial Video SoC aids digital transition in Mexico.

Intended for HD converter boxes and STB platforms used in Mexico, BCM7543 integrates ATSC-compliant 8VSB digital channel demodulator, MPEG2 and H.264 HD video decoder, and GPU. Complete hardware and software turnkey system also features 1,100 DMIPS CPU, Dolby Digital and MPEG audio decoder, RF 3-4 modulator, and analog A/V and HDMI output. Tuner scan and lock, signal strength meter, software...

Read More »
GaN Low-Noise Amplifier features 23 dB gain.

GaN Low-Noise Amplifier features 23 dB gain.

Able to survive input power levels up to 5 W without front-end limiter, 4–8 GHz Model CMD219 features output of 1 dB, compression point of +18 dBm, and noise figure of 1.1 dB across operating bandwidth. Typical bias conditions are Vdd = 10 V at 100 mA and Vgg = -2.3 V, although Vdd can vary from 5–28 V. Suitable applications include point-to-point and point-to-multipoint radios, military and...

Read More »

System Power Management IC optimizes mobile product functionality.

Adopting 130 nm analog semiconductor process, TC7734FTG comes in 7 x 7 mm QFN64 package, accepts 3.4–5.5 V input, and integrates various power management blocks: power paths, switching charger, 4-channel buck converters, 3-channel LDO regulators, and 2-channel LED backlight drivers. All charger functions operate automatically without external control signals. Other features include external...

Read More »

Printer SoC drives 3D printing into mainstream applications.

Based on 88PA6120 SoC, integrated 3D Printer SoC solution provides complete reference kit with full-featured functionality to enable turnkey development of 3D printer products. Solution's 88PA6120 SoC integrates 533 MHz ARM v7 compatible processor and dual real-time microprocessors, as well as 10/100 PHY, USB, DRAM, SD, and eMMC. Providing real-time 3D motion control, Linux SDK includes Ethernet...

Read More »

Copper Gigabit PHYs support 2.5G and 5G Ethernet.

Designed in 28- nm process technology, BCM8486X Series is available in single-port and quad-port packages, and addresses both switching and access point markets. Units are based on 10GBASE-T architecture and offer coding strength of 10G at 2.5G and 5G speeds, resulting in optimized alien noise rejection and cable reach of more than 100 m over existing Cat5e and Cat6 cables. PHYs also deliver...

Read More »
Opto-Isolated Fast Gate Driver IC works with power MOSFETs, IGBTs.

Opto-Isolated Fast Gate Driver IC works with power MOSFETs, IGBTs.

Supplied in 8-lead DIP and 8-lead SOIC package options, IX3180 serves applications requiring isolated drivers for fast switching power MOSFETs and IGBTs. Optocoupler input consists of LED optically coupled to IC containing photodiode and push-pull power output, and output is capable of providing 2.5 A peak drive current. Specified from -40 to +100-°C, product has 10–20 V supply range, 100 nS...

Read More »
NFC Sensor Transponder targets IoT applications.

NFC Sensor Transponder targets IoT applications.

Combining ISO 15693-compliant NFC interface with programmable MCU, non-volatile FRAM, 14-bit ADC, and SPI or I2C interface, Model RF430FRL15xH is optimized for use in fully passive or semi-active modes to achieve extended battery life in consumer wearables, industrial, medical, and asset tracking applications. With fully programmable 13.56 MHz transponder, developers can design products that...

Read More »

WinnerMicro Will Bring the World's Leading Low Power Embedded WiFi SoC Chip and IoT Solutions to Exhibit in 2015 CES

LAS VEGAS- – Summary: Following the fast growth of IoT (Internet of Things), the low power embedded WiFi SoC single chip has become the mainstream in applications of IoT products. In the forthcoming 2015 CES show, WinnerMicro will exhibit its independent design WiFi SoC, referenced modules, CoC(Cloud on Chip) rapid prototyping develop system and its partners' IoT solutions. Its exhibition...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics