Chemical Strippers

Hard Metal Coating Strippers remove TiN, CrN, and TiAIN.
Chemical Strippers

Hard Metal Coating Strippers remove TiN, CrN, and TiAIN.

To allow re-coating, Deconex® De-Coat Metal Coating Strippers remove specific types of coatings on carbides, carbide composites, HSS, PM, and other tool steels while protecting integrity of base materials. They are suited for use in cold- or hot-process baths, applications include forming tools, drill bits, end mills, hobs, cutting inserts, pins, punches, and bushings. Extending useful life of...

Read More »
Powder Coating Stripper performs at room temperature.
Chemical Strippers

Powder Coating Stripper performs at room temperature.

Designed for use in immersion tank with no heating required, D-Zolve 1012 strips hard-to-remove powder coatings and paints from intricate part shapes. Product is compatible with metals, ferrous and non- ferrous, as well as plastics. Stripping time typically ranges from 30 min or less to 2 hr. Designed to minimize health and environmental hazards, product is non-flammable, has no hazardous air...

Read More »
Chemical Strippers

Metal Coating Strippers extend tool life.

Developed to protect integrity of base material, Deconex® De-coat Strippers are chemically formulated to strip specific coatings from specific substrates in cold- or hot-process baths. Products permit re-coating of TiN, TiCN, CrN, and TiAIN multilayer coatings on carbides, composites of carbides, HSS, and PM steel. Offered in 1 "200 kg sizes, strippers can be used on forming tools, drill...

Read More »
Solvent strips powder coating masking plugs.
Chemical Strippers

Solvent strips powder coating masking plugs.

Suited for use on wide range of materials including silicone and neoprene, D-Zolve removes several layers of build-up from self-threading to dual-flanged pull plugs. When used in immersion tank, product's properties lift layers of paint and break chemical bond between powder coating and substrate. Paint layers pull away from surface and fall to bottom of tank.

Read More »
Chemical Strippers

Dry Strip suits high-volume, resist strip applications.

Available in 200 and 300 mm versions, RapidStrip(TM) 320 resist and polymer removal system uses downstream, microwave plasma generation and chuck-based, wafer heating to provide dry strip process. Small process vacuum chambers enable high ash rates. Suited for front-end-of-line applications, RapidStrip platform offers single and dual process-chamber configurations.

Read More »
Chemical Strippers

Stripping System cleans low-k materials without damage.

ES3LK 300 mm photoresist plasma stripping system provides zero-damage process for low-k materials, capping layers and etch stops used in low-k integration schemes through 45 nm technology node. Stand-alone, isotropic, dry-strip system maintains lowest k-effective value for integrated back-end-of-line dielectric stacks. It is compatible with subsequent wet cleaning steps and can be used with...

Read More »
Paint and Gasket Remover contains no methylene chloride.
Chemical Strippers

Paint and Gasket Remover contains no methylene chloride.

Sprayon® E-Z Strip(TM) cleans baked-on residues from gaskets, adhesives, RTV silicones, carbon deposits, grease, oil, and rust. Product also removes industrial coatings such as oil, latex, acrylic and lead-based paints, shellac, lacquer, and powder coatings. Suitable for wood, masonry, plaster, aluminum, and steel substrates, stripper is applied via aerosol spray. Operation consists of...

Read More »
Chemical Strippers

Resist Stripper cleans tight spaces.

Type SR-301CM removes dry-film resist particles from spaces smaller than 2 mil and cleans stains from ferrous and non-ferrous metals in one step. It also removes over-cured photoresist and eliminates redeposition of resist particles. Stripper contains no glycol-ether solvents or SARA Title III, Section 313 reportable chemicals. It contains copper brighteners and anti-tarnish agents that produce...

Read More »
Cleaning/Stripping System eliminates hazardous waste.
Chemical Strippers

Cleaning/Stripping System eliminates hazardous waste.

Self-contained Model MSM uses Methylene Chloride, an EPA-approved solvent, to clean and strip coatings, while recovering all solvent. Method eliminates flammable and explosive solvents, as well as hand scrubbing and scraping. Process, when used for stripping, removes resists used for masking during plating and etching. It also removes rubber, paints, resins, and other coatings, and cleans spray...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics