New Buses Products

I/O Modules communicate via Profibus DP and DeviceNet(TM).

CompactBlock(TM) LDX I/O blocks transmit analog and temperature information via networks. Analog blocks bring in data from valves, pressure sensors, and related field devices; while temperature blocks accept signals from thermocouples and RTDs, eliminating need for intermediate transmitters. Both provide scaling for different device types. I/O system includes communication adapter and base block...

I/O Modules get networked.

CompactBlock(TM) I/O are available on Remote I/O (RIO) and PROFIBUS DP. Ten new modules include: 1791R-16B0, 1791R-0B16P, 1791R-8B8P, 1791R-4B4P, 1791R-8V8P, 1791P-16B0, 1791P-0B16P, 1791P-8B8P, 1791P-4B4P, and 1791P-8V8P. I/O base blocks combine communication adapter, I/O circuitry, and terminations into single package. Base blocks are available with 4, 8, and 16 I/O points for 24 Vdc...

Platforms come with Windows, Linux, or Solaris(TM) OS.

eFUZION-2U/AEP, 3.5 in. rack mount, Server Application Platform provides multi-device support and up to 3 full-length, full-height 32bit/33MHz PCI expansion slots. eFUZION-2U/AMP scalable ServerWorks, Pentium III, Server Class Application Ready Platform includes Intel Server Division SCB2-SCSI motherboard. Both models offer integrated 10/100baseT Ethernet controllers, integrated Intel 3D...

STD Bus Developers Kit supports company's SBCs.

SDK2-STD-CC15 Bus System Developers Kit supports 386sx, 586DX, and Pentium processor boards as well as existing CPUs and I/O modules. Fully assembled SDK-STD-CC15 Kit has 15-slot, 0.625 in. card cage packaged with disk drives, cables, and software. Backplane provides constant characteristic impedance to reduce noise and crosstalk. Power supply (80 W switcher), CD-ROM, floppy disk drive, and 6.4...

Accelerating Composites Production with Dielectric Cure Monitoring

This white paper provides an in-depth explanation of how dielectric monitoring works, and why it's the best choice for any company working with advanced composite materials.

Communciations Gateways connect to DeviceNet and Profibus.

COM-G and COM-H DIN rail mounted units convert serial communication protocols to Profibus or DeviceNet following ODVA guidelines. COM-G converter interfaces with company's single loop controllers to enable them to work as slaves to PLC via Profibus. Single COM-G links up to 31 instruments. COM-H converts standard/ANSI protocol used by company's multi-loop controls to DeviceNet. It can link with...

CompactPCI CPU Board supports Pentium III(R) processors.

Passively cooled, scalable CP304 CompactPCI controller supports Pentium III FC-PGA and FC-PGA2 processors, as well as low-voltage versions and future generations. Hot-swappable board supports up to seven 32-bit/33 MHz peripheral boards, allows memory upgrades of up to 512 MB SDRAM, and supports Microsoft Windows 2000 and XP, Linux, and VxWorks operating systems. Applications include VPN,...

D-Sub Connnectors plug into Profibus.

SUBCON-PLUS field-wire connectors make wiring and installation of Profibus nodes easy by providing a way to make terminations without soldering or crimping. Incoming and outgoing bus lines connect to screw or spring clamp terminal blocks. Connectors have EMI/RFI shielded housing, making it suitable for use on cables with up to 12 Mbit/s data rates. Available with angled or straight cable feeds....

Fieldbus Coupler fits CANopen systems.

IL CAN BK bus coupler operates at any position in CANopen network. It uses diagnostics element to send detailed failure cause and location data to master, where they can be evaluated by appropriate software. Diagnostics and status displays enable exact module fault location and on-site determination of cause. Coupler supports analog and digital I/O, special function I/O, Category 4 Safety relay...

Sensor Box Line is available in 3- or 4-pole versions.

SAI line includes fieldbus active components for Profibus DP, ASI Interface, and CAN Open. Features include bus and power connections through cable glands or metric M23 and M12 (coded B, PB) connections. Distributor base module is available as 4- or 8-channel M12 unit with IP68 or NEMA 6P rating or with IDC quick-fit technology for IP67 or NEMA 6 rating. M12 technology is available as 4- or...

I/O Modules support data acquisition.

Modules in I/O Pak(TM) family include C, K and DL Series. C-Series are 100Hz, 16-bit analog measurement devices with Modbus-RTU, Profibus-DP and simple ASCII communications options. K-Series are 1000Hz, 19-bit analog measurement devices that can be configured as Modbus or ASCII protocol slaves. DL-Series data logging modules with Modbus, Profibus and ASCII serial interface can log data from...

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.