Controller/I/O Cards feature Intel Pentium 4-M processor.

Controller/I/O Cards feature Intel Pentium 4-M processor.

Controller card MIC-3318 is equipped with 400 MHz system bus, 512 Kb on-die L2 cache, support for DDR memory, and 2 Ultra ATA 33/66/100 high-speed IDE drives. Model MIC-3753 is a 72-bit digital I/O card for CompactPCI bus. I/O lines are divided into nine 8-bit I/O ports, allowing user to configure each port as input or output. General-purpose MIC-3780 is a multi-channel, counter/timer card for...

Read More »
PXI Card offers 4 high-speed digitizer channels.

PXI Card offers 4 high-speed digitizer channels.

UltraFast UX3131 3U PXI Card allows engineers and scientists to acquire all 4 channels at sampling rates to 25 MS/s for SONAR, LIDAR, and ultrasonic measurements. Card combines 12-bit resolution, 8 input ranges, programmable input offset, up to 64 MS memory, and optional high-speed digital inputs. Each channel can be programmed with 1 of 8 input ranges -

Read More »
Embedded Board delivers industrial Ethernet.

Embedded Board delivers industrial Ethernet.

Single-port serial Ethernet communication board, PS100B, brings RS232/422/485-based industrial devices under control of 10 Mbit/s Ethernet network. It incorporates selectable RS232/422/485 serial interface and transfers industrial device data up to 115 Kbit/s. Offering voltage from 9-30 V, it accommodates power requirements in industrial automation environments. Features include device management...

Read More »
PCI-Based DAQ Boards feature plug-and-play operation.

PCI-Based DAQ Boards feature plug-and-play operation.

DaqBoard/1000(TM) series provides 16-bit, 200-kHz A/D converter and 16 single-ended or 8 differential analog inputs. Boards feature synchronous analog, digital, and frequency I/O as well as DMA bus mastering. On-board scan sequencer permits user to select up to 512 channel/range combinations and scans all channels contained in sequence at rates to 5 -µs/channel. Up to 4 DaqBoards can be used per...

Read More »
PCI Board supports CANbus connection.

PCI Board supports CANbus connection.

CAN-PCIL(TM) consists of non-intelligent, short form-factor, PCI board that is available in single- or dual-channel versions. Acting as CAN interfaces for PCI systems, product is available with CANopen software support and optional opto-isolation. Product supports Linux and Windows operating systems, has 3.3 and 5 V PCI interface, and occupies one slot.

Read More »
Adapter Board adds DVB-T reception to analog TV.

Adapter Board adds DVB-T reception to analog TV.

MicModule allows TV manufacturers to add digital terrestrial video broadcast functionality to existing analog chassis. It is equipped with universal tuner and can be directly connected to any VHF/UHF input. MicModule uses DRX 8872C DVB-T COFDM demodulator IC and MDE 9515B digital audio, video, and graphic controller IC for decoding and processing of digital MPEG-2 signal. CI slot supports major...

Read More »
FPGA Board allows hardware reprogramming via USB.

FPGA Board allows hardware reprogramming via USB.

MORPH-IC(TM) uses MPSSE interface of FTDI's FT2232C to program and reprogram FPGA via USB interface, making it suitable for applications requiring flexibility and in-circuit hardware upgrade-ability. Contents of FPGA can be defined over USB on initialization, by loading from an Altera format configuration file, and can also be reloaded and/or redefined in 0.2 seconds. Second channel of FT2232C is...

Read More »
Digitizer PCI Card has 8 high-speed A/D channels.

Digitizer PCI Card has 8 high-speed A/D channels.

UltraFast UF3132 provides 8 analog input channels on one card; up to 16 cards can be combined in industrial PC. Product employs eight 12-bit A/D converters with max sampling rates of 25 MSamples/sec, provides simultaneous sampling, and has up to 256 MSample onboard signal memory. Each channel has 8 software-selectable input voltage ranges from -

Read More »
Instrument Controller features touchscreen-operated GUI.

Instrument Controller features touchscreen-operated GUI.

QScreen Controller(TM) is a C-programmable embedded computer powered by HC11 Motorola microprocessor. It features real-time multitasking operating system, hundreds of pre-coded device drivers, up to 1 M Flash, and 512 K RAM. Controller commands eight 8-bit A/D lines, 8 digital I/O lines, and 2 RS232/485 ports. It can host up to 7 stackable Wildcard(TM) I/O modules. Applications include scientific...

Read More »

Digital I/O Boards offer 32-64 channels.

Series 1700 PCI Cards feature isolated digital input and output channels with protection up to 2,500 Vdc. All outputs keep last values after hot system reset and provide channel-freeze function that keeps current output status unchanged for each channel during operation. Most boards support Board ID function, which helps engineers identify and access each card during hardware and software...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics