Evaluation Board/Digitizer enables accelerated prototyping.

Combining 14-bit ADCs in interleaved fashion with Xilinx® Virtex®-5 FPGA, ADS5474ADX-EVM is used to create 800 MSPS digitizer solution and enables rapid prototyping of interleaved system for wide-bandwidth applications. FPGA comes with SP Devices' time-interleaving technology to eliminate interleaving spurs, and software continuously monitors system and removes ADC gain, clocking, and...

Read More »
Processor Module handles compute-intensive applications.

Processor Module handles compute-intensive applications.

Including up to 4 Gb of memory (DDR2) with ECC running at 400 MHz and 8 Gb of Flash memory via onboard USB 2.0 Flash controller, AM4011 AdvancedMC(TM) processor module may be used as main controller, data server, traffic processor, or media processor in any single-width MicroTCA(TM) platform. Available with LV Intel® Core(TM) 2 Duo processor, it features 4 GbE interfaces, and Module Management...

Read More »

Starter Kit evaluates ARM7-based microcontrollers.

Allowing designers to determine how software, MCU, and IP will operate in customizable MCU, CAP7 Starter Kit combines PCB with ARM7-based AT91CAP7E MCU, Altera® Cyclone®II EP2C8F256C7N FPGA with EPCS4SI8N serial configuration memory, 2.8 in. TFT LCD panel, joystick, 64 MB SDRAM application memory, 10-bit ADC, 256 MB NAND flash, and 4 MB DataFlash®. Designers can gauge power consumption and...

Read More »

Multi-Core Processor Blade features up to 32 GB main memory.

Combining two 2.13 GHz quad-core Intel® Xeon® processors and redundant 10 GbE support, ATCA-7350 ATCA blade delivers performance and flexibility required by server-type communications network elements. It supports media servers in IPTV and IP Multimedia Subsystem broadband networks, and features dual hot-swappable and RAID-capable on-board disk drives. PICMG 3.1-compliant fabric interface...

Read More »

ATCA Multi-Core Processor Blade has on-board 10 GbE switch.

With dual Cavium OCTEON(TM) PLUS sixteen-core processors, ATCA-9305 enables network equipment to handle data plane and control plane applications on same hardware. It features RLDRAM for deep packet inspection in telecom networks and PCI Express x4 port lane for design of custom rear transition module with storage. Blade is suited for data plane elements in applications such as 4G/LTE wireless,...

Read More »

Development Platform helps create tracking applications.

Integrating hardware and software, Track&Trace Platform is based on uTrace03 telematics module, which consists of GPS receiver, GSM/GPRS modem with quad band antenna, and connectors. Also included are development board, and automotive interface board with power supply, optional automotive bus connections, sensors, and flash memory bank. Software includes functions for GPS navigation, database for...

Read More »

Digital I/O Boards have PCI Express form factor.

PCIe-DIO24 features 24 channels of digital I/O with selectable 3.3 and 5 V logic levels. High-density PCIe-DIO96H offers 96 channels of 5 V compatible digital I/O with 64 mA sink, 15 mA source capability. Both offer software selectable pull-up and pull-down resistor configurations and ship with TracerDAQ®data logging, viewing, and analysis application; InstaCal(TM) installation, calibration, and...

Read More »
EPIC Board features AMD Geode(TM) LX processor.

EPIC Board features AMD Geode(TM) LX processor.

Supporting onboard AMD Geode(TM) LX800/900 or optional LX700 processor, Model EPIC-5536 offers 200-pin DDR SODIMM and system memory up to 1 Gb for DDR 333 or 512 Mb for DDR 400. It adopts Realtek 8100C 10/100Base-TX chip that deploys two RJ-45 ports or optional RTL8110S gigabit LAN to provide flexible network connections. With power consumption of less than 10 W, unit accommodates 1 IDE, 2 SATA I...

Read More »

CompactPCI Module supports mass storage drives.

Communicating with host computer via 3U CompactPCI backplane, TP MS1/x11 SATA300 Controller Board accommodates two 2.5 in. Serial ATA300 mass storage drives plus CompactFlash(TM) site. It can support 33 and 66 MHz signaling speeds and has built-in option for 32- or 64-bit backplanes. Serial ATA interface supports transfer rates up to 300 Mbps per drive. Expansion to three or four SATA300 drives...

Read More »

DAQ Board facilitates 16-bit data conversion.

Providing 16 differential isolated analog inputs and 2 isolated analog outputs, Model MSXB 085 isolated analog expansion and termination board can sample signal inputs at 333 k samples/sec and can update both signal outputs at 500 k updates/sec. It fits into backplane in standard industrial enclosure or directly into DAPserver to form networked, isolated instrument. Up to 8 boards can be...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics