Ballasts support high-wattage compact fluorescent lamps.
SmartMateÃ-® ballasts support PL-H(TM) lamps from Philips. One ballast can operate one or two 60 W lamps, one 85 W lamp, or one 120 W lamp. Available in 13-120 W range, ballasts are rated to 90Ã-
Read More »Ballasts suit high-wattage, metal halide applications.
Compact Core Ballasts utilize 4Ã-¼ x 4Ã-¾ in. core and are available for 1,000 W probe-start, 1,000 W pulse-start, and 875 W pulse-start metal halide lamps. Units comply with ANSI, UL, and CSA standards. Multi-tap formats include 120/208/240/277 quadri-voltÃ-® and 347/480 dual-volt with 120 V output tap. Ballasts are suited for high bay industrial fixtures, outdoor flood and area...
Read More »Dimming Ballast suits range of CFL applications.
Mark 7(TM) Electronic Dimming Ballast supports 8 compact fluorescent lamp/ballast combinations including 13 W and 18 W applications. It includes programmed-start lamp ignition, total harmonic distortion below 10%, color-coded poke-in connectors, lamp end-of-life protection circuitry, and operation above 42 kHz. Unit dims lamps directly from compatible 0-10 V controls, including occupancy sensors,...
Read More »Ballasts drive two 57 or 70 W compact fluorescent lamps.
SmartMateÃ-® Ballasts offer programmed lamp ignition for extended lamp life in frequent switching applications. Model ICF2S70-M4-BS has bottom studs and single-entry connector, while Model ICF2S70-M4-LD features length mounting feet and dual-entry connector. Maximum case temperature is 90Ã-
Read More »How to Select a Thermal Fluid Heater for Your Process
Do you know the important factors you should consider when comparing different types of thermal fluid heaters?
Read More »Dimming Ballast is designed for 18 W CFL operation.
Encased in 3.00 X 4.55 X 1.29 in. housing, Mark 10(TM) Powerline Dimming Ballast is available for operation of one or two 18 W Triple or Quad Tube Compact Fluorescent Lamps (CFLs). Product delivers 100%-5% continuous dimming capability and takes dimming signals directly from power line. Features include programmed-start operation that provides lamp ignition at any light setting, operation above...
Read More »Electronic Ballast is suited for HID lamps.
DynaVision(TM) microprocessor-based electronic ballast, designed for operation of 320, 350, or 400 W pulse-start metal halide lamps, is able to maintain lumen levels over lamp life. Product features IntelliVoltÃ-® technology, which permits operation on voltage systems ranging from 200-277 V. Additional offerings include continuous 0-10 V dimming down to 50% of lamp power and ability to...
Read More »Ballasts suit HID lighting applications.
ULTim5(TM) T5HO ballasts have small cross sections that allow units to be incorporated into various fixture applications. Designed for 1- to 4-lamp applications, units offer end-of-lamp-life shutdown circuitry for safe operation and are available in universal (120-277 V) and high-range (347-480 V) input voltages. Ballasts are suited for new construction and retrofits in gymnasiums and high-bay...
Read More »Electronic Ballast saves energy.
High-effiency ULTim8(TM) ballast family provides up to 8% energy savings over standard electronic ballasts, and more when operated with energy-saving 30-watt T8 lamps. Ballast features parallel lamp operation and automatic reset upon lamp replacement. It operates 1-4 lamps and is available with .78 or .88 ballast factor. Total harmonic distortion is less than 10%.
Read More »Dimming Ballast comes in digital and analog versions.
Offered in single- and multiple-lamp versions, with various case configurations, analog SuperDim(TM) offers universal input voltage and is suited for compact-fluorescent and T8, T5, and T5HO linear-fluorescent applications. Digital AddressPro(TM) enables users to independently control multiple lighting zones. It features universal input voltage and 2-way addressability that allows group and scene...
Read More »Ballasts suit T5 and T8 lighting applications.
AccuStartÃ-® 5 ballasts handle high-end T5 and T5 High Output (HO) architectural applications. Offerings include universal input voltage, programmed rapid-start operation, and end-of-lamp-life shutdown circuitry. AccuStartÃ-® 8 ballasts, for frequently switched T8 lighting applications, provide universal input voltage, programmed rapid-start technology, and low-profile design. They handle...
Read More »Industry Leading OEM with over 65 Years of Experience
Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.
Read More »