Engine-Driven Welder offers multi-process capabilities.
Offered in compact case, Vantage 500 PerkinsÃ-® is powered by 4-cylinder, 1,800 rpm turbo-charged diesel engine that meets EPA Tier 4i standards. Unit offers stick, TIG, MIG, flux-cored, and arc gouging mode, and can produce up to 12,000 W of continuous 1-phase ac generator power for common construction tools, while simultaneously welding at up to 250 A. With 20 gal fuel tank, unit offers 9...
Read More »Portable Welder suits on-site welding applications.
Designed as dc stick welder and ac power generator, OutbackÃ-® 185 has smooth dc welding output of up to 185 A for welding steel, stainless steel, or cast iron, as well as hardfacing projects due to its ability to operate up to 5/32 in. stick electrode. It features front accessible engine control panels, 6.8 gal fuel tank, and Low-Lift(TM) grab bars that allow for lifting unit on and off...
Read More »
All-in-One MIG Welder facilitates set-up and use.
Millermatic 212 Auto-Set incorporates one feature that automatically sets proper speed and voltage after user inputs metal thickness and wire diameter. Along with infinite voltage control for manual fine-tuning of voltage and wire feed speed, welder offers Line Voltage Compensation for maintaining welding output in event of Ã-
Read More »
Portable MIG Welder can weld up to 3/8 in. thick mild steel.
Featuring Auto-Set(TM) technology to eliminate need to set voltage and wire feed speed, MillermaticÃ-® 211 Auto-Set(TM) with MVP(TM) includes Multi-Voltage Plug (MVP) that allows user to quickly switch between 120 and 230 V without use of tools. Auto-Set allows user to dial in welding wire diameter and metal thickness. Compatible with Bobcat(TM) generators, welder comes complete with 10 ft...
Read More »
Considerations for Choosing a Plastic Injection Molder
Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.
Read More »
Wire Welder suits aluminum/stainless steel welding.
Featuring Diamond Core Technology(TM), Power MIGÃ-® 140 and 180 are designed for thin gauge steel, stainless and aluminum or on gasless flux-cored welding. With amperage range of 30-140 A, user can MIG weld single pass up to .135 in. and perform self-shielded flux-cored multiple pass welds up to 5/16 in. with Power MIG 140 models. Power MIG 180 models with amperage range of 25-180 A, can MIG...
Read More »
Miller to Introduce New Pipe Welding System, Improved TIG Welder and More at WESTEC 2009
Visit Miller at Booth #4013 On display: PipeWorx(TM) Welding System, designed to streamline pipe fabrication. Also on display: Miller's Dynasty 200Ã-® AC/DC TIG/Stick inverter now available in a complete water-cooled TIGRunnerÃ-® package. APPLETON, Wis., February 3, 2009-- Miller Electric Mfg. Co. will be presenting several new welding and plasma cutting solutions in booth #4013 at the...
Read More »
Compact Welder is offered as ready-to-use MIG package.
Featuring twenty-four overlapping heat (voltage) steps and flat and slope taps to allow accurate fine tuning, Migmaster 275 is rated 275 A at 40% duty cycle and 200 A at continuous 100% duty cycle. It features DC welding output from 30-300 A with heavy-plate parameters for 5/8 in. and above, tool-less polarity change, NAS gun connection with torch wrap, and spool-on-gun control. Wire feeder with...
Read More »
Water-Cooled TIG Welders are offered as all-in-one systems.
DynastyÃ-® 200 DX TIGRunner(TM) and MaxstarÃ-® 200 DX TIGRunner systems are supplied on 2-wheel trolley cart with cylinder rack as well as cable and torch holders. Respectively, power source options include Dynasty 200 DX (AC/DC TIG/Stick output) and Maxstar 200 DX (DC-only TIG/Stick output) rated 1-200 A. Systems also include 25 ft WeldcraftÃ-® WP20 water-cooled torch, Coolmate(TM) 1...
Read More »
Orbital Pipe Welder features all digital design.
Sealed to IP23 rating for waterproof and dustproof operation, Pipeliner II uses Flux Core Arc Welding process, and meets API 1104 and ASME code standards. FCAW process allows heavy wall pipe to be welded and does not require narrow gap joint geometry. Adaptable to 6-60 in. pipes, welder utilizes push-pull feeder for positive electrode delivery, while allowing use of standard 15 kg wire spools....
Read More »
Miller to Showcase TIG Welders, Lightweight Plasma Cutter and New Millermatic MIG Welders at 2007 FABTECH International/AWS Welding Show
APPLETON, Wis., July 23, 2007 - Miller Electric Mfg. Co. (booth #4071) will showcase its new Dynasty 350 AC/DC TIG inverter, Maxstar 350 DC TIG inverter, Spectrum 375 X-TREME plasma cutter and three new Millermatic models: the Millermatic 212, DVI2 and 252, at the 2007 FABTECH International/AWS Welding Show in Chicago, November 11-14. Additional new products may be announced before the show. Full...
Read More »
How SpinSelect Can Save You Time and Money
Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.
Read More »
