Welding System uses 2 different welding heads.
Orbitwin allows connection of 2 different types of welding heads to one welding power source, so 2 different tube sizes can be welded without changing weld head cables. Unit automatically detects which head is being activated, selects correct procedure, and switches power, water, and controls to head that is initiated. While one head is in use, other is completely isolated from main welding...
Read More »MIG Welder features multi-voltage power cord.
Able to connect to 115 and 230 V power receptacles, Millermatic-® DVI (Dual Voltage Input) MIG welding power source has 30-175 A operating range. It outputs 90 A @ 20% duty cycle while operating on 115 V and 150 A @ 40% while operating on 230 V. Unit utilizes dual-gear-driven, cast aluminum drive system and comes with power source, M-10 gun and cable assembly, 10 ft work cable and clamp, dual...
Read More »All-In-One Arc Welding System offers jobsite portability.
MillermaticÃ-® Passport(TM) provides MIG arc welding power source, wire feeder, self-contained shielding gas system, and gun in one package. With 30-180 A current output range, system features multi-voltage plug and Auto-Line(TM) power management technology and lets operators choose between internal CO2 gas supply or bulk supply. Inverter-based technology promotes control of arc...
Read More »
Pedestal Welder is built for heavy-duty applications.
Equipped with proprietary weld control, S-NDX has heavy-duty frame with adjustable lower knee and optional T-slot platens. Unit is adaptable to high- and low-volume production, providing capabilities for manual spot welding, robotic welding cells, projection welding, and fixtured welding. It can also be integrated into existing welding and assembly operations. Features include adjustable strokes...
Read More »
Advantages of Using Robotics in Manufacturing to Attract and Retain Skilled Workers
This white paper provides an overview into the advantages of using robotics in manufacturing to attract and retain skilled workers.
Read More »
Stud Welder makes welds without reverse side marring.
With weld times of 0.01 sec and charge time of under 3 sec, Capacitor Discharge (CD) 110 Stud Welder may be used for contact and gap CD stud welding. Abbreviated weld time minimizes heat buildup, resulting in minimal discoloration, burning, or reverse side dimples. Unit achieves single-sided welds with minimal distortion on materials as thin as 0.020 in. and offers 110,000 Ã-µF of...
Read More »
Power Sources provide pulsed MIG welding.
MillermaticÃ-® 350 and 350P offer 208/230 or 460/575 V single- and 3-phase input power, duty-cycle rating of 60% at 300 A/32 V, 25-400 A output, and line voltage compensation. Operators can disconnect MIG gun and replace it with optional push-pull wire feed gun. Model 350P has 4-roll wire drive system with 2 scaled tension adjustments and reversible drive rolls for .035 and .045 wire. Units...
Read More »
Spot Welder uses middle-frequency inverter technology.
Middle Frequency Inverter Spot Welder is available in Projection or Spot Weld models from 32-240 KVA, rated at 50% duty cycle with max welding currents to 88,000 A secondary. Middle Frequency (1,000 Hz) Inverter technology employs weld times measured in milliseconds to deliver continuous, constant weld current, resulting in homogeneous development of weld nugget and cosmetic appearance of weld....
Read More »Welder delivers 10,000 peak watts.
Eagle(TM) 10,000 provides stick welding, basic DC TIG welding, and auxiliary power. Operators can simultaneously weld and use AC generator power for lights, tools, and emergency standby power. Rated 210 A/25 Vdc, unit is equipped with 2-cylinder, 4-cycle, 20 hp, OHV air-cooled Kohler gasoline engine. Welder includes 20 ft No. 2 electrode cable, electrode holder, 15 ft No. 2 work cable, and work...
Read More »
Multi-MIG Welding Inverters monitor arc conditions.
Software-driven, Axcess(TM) 675 provides output of 675 A/44 V at 100% duty cycle, making it suited for large welds requiring long cycle times. Voltage range in CV mode is 10-44 V with 80 Vdc max open circuit voltage. Auto-Line technology enables machine to accept any primary power from 190-630 V, single- or 3-phase, 50 or 60 Hz. Auto-Axcess 675 offers same features but communicates through...
Read More »
AC/DC TIG Welder delivers 200 A of welding power.
Pulling 25 A of power, Invertig 201 AC/DC TIG Welder allows users to vary AC frequency from 20-200 Hz while maintaining square wave throughout complete range for control over arc. Pulsing, with frequency from 0.4-300 Hz, is standard, and balance is adjustable from 10-90%. Unit weighs 65 lb and fits in cabinet measuring 20 x 9Ã-½ x 19Ã-¾ in. It comes with 25 ft SR-17 air-cooled TIG torch,...
Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »
