Portable AC/DC Inverter handles TIG welding applications.
PRO-WAVE 185TSW generates True-Square wave AC/DC output with full range capability from 185 A down to 5 A. Voltage Reduction Device prevents accidental electric shock by reducing OCV when power supply is not in use. Inverter includes Current Sloper; Current Pulser; variable frequency, wave balance control; digital AMP/volt meter; remote control capabilities; and Lift or HF assisted starting. All...
Read More »TIG Welders come in Ready-Pak(TM) systems.
Models TIG 275 and 375 feature MicroStart(TM) TIG technology, which provides arc starting at low amperage levels of 2 A dc or 5 A ac. Units include cable management system, water-cooled torch connections, under-cooler cart water cooler, and separate output studs for work cable/clamp and electrode holder. Ready-Paks are fully assembled and include TIG 275 or 375, zippered torch cover, parts kit,...
Read More »Diesel Welder suits cross-country pipeline welding industry.
Pipeliner® 200D, with all-copper windings, is powered by 4-cylinder, water-cooled Perkins 104.22 engine. It provides 200 A of DC power at 60% duty cycle as tested at 104°F, allowing for welding up to 7/32 in. low hydrogen electrodes. Capable of performing stick and TIG welding and arc gouging, unit has DC generator that provides 1,750 W of DC auxiliary power. Offerings include automatic...
Read More »Welding Generator has fuel tank that lasts all day.
Stick, TIG, wire, and pipe-welding Ranger(TM) 305D has enclosed case, Chopper Technology(TM), and 12 gal fuel tank. Powered by 3-cylinder Kubota-® D722 diesel engine, it delivers 9,500 continuous W of 120/240 Vac generator power. Multi-process 300 A dc diesel-engine drive welder offers arc-control adjustment, plus fuel pump with air-bleed system that eliminates manual air bleeding if tank is run...
Read More »The Use of Water Treatment in the Healthcare Industry
Facilities Where Water Treatment for Healthcare Is Essential
Read More »Welding System offers remote WFS/voltage control.
Delta-FabÃ-® MIG/flux cored welding system offers 375 A welding power at 100% duty-cycle, 50 to 500 A. Unit produces 10 to 45 open circuit volts to combat voltage drops when power source is stationed away from workspace. Acceptable wires include .035-.045 in. hard and stainless steel wires and 1/16 in. flux cored wires. Drive roll system provides positive feeding for wires .045 and larger and...
Read More »TIG Welder features adjustable balance control.
Syncrowave-® 180 SD TIG/Stick power source allows operators to preset welding amperage with digital meters. Output is 10 to 180 A in both AC and DC TIG welding mode. Selectable arc start function controls initial volume of current to create soft start, standard start, and hot start. Adaptive Hot Start feature automatically increases amperage during arc start when required. Fan-On-Demand cooling...
Read More »Wire Welder OHV Engine
Ranger-® 8 is offered with 20.5 hp, twin-cylinder, air-cooled Onan-® Performer-® gasoline engine that runs at 3,600 rpm. Automatic engine shutdown protects against low oil pressure and prevents engine damage, while automatic engine idler offers fuel economy and noise control. Ranger 8 Onan OHV suits Stick, DC and AC TIG, and general purpose CV wire feed welding. Unit offers 8,000 W continuous...
Read More »Stud Welding System suits robotic production lines.
KSE100 servo-operated weld gun provides precise gun shaft positioning, closed-loop stud feeding, pulse welding, and simplified maintenance. It handles auto feed stud types from 3 to 8 mm shank dia. Position feedback system and servo electric drive controls arc length, lift and plunge velocity, and depth penetration of each stud weld. Programmable pulse welding mode produces square-wave that...
Read More »Welder comes with trailer package.
Engine-driven Shield-Arc(TM) SA250, in fully assembled Ready-Pak(TM) road-trailer package, consists of power source, trailer, cable rack, ball hitch, fender and light kit, 300 A ground clamp, 300 A electrode holder, 100 ft 2/0 electrode cable, 100 ft 2/0 ground cable, and 7018 Excalibur electrodes. SA-250 250 A stick welder features Perkins 4-cylinder, water-cooled, diesel engine. It is suitable...
Read More »MIG Welding Gun comes with choice of nozzles.
Lightweight Bantam 180 A MIG gun is suitable for companies that only weld occasionally or do not need more powerful gun. It uses series 11 contact tips in standard, H.D., and tapered configurations. Nozzles range from recessed insulated and flush to tapered and recessed.
Read More »Let Our Safety Experts Lower Your Risk
Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.
Read More »