New Amplifiers Products

Signal-Conditioner Module offers dual channels.

Test Friendly(TM) Dynamics Model 4120 provides 40kHz signal amplification, non-linearity correction, and cold-junction compensation for conversion of millivolt output of thermocouple into 0 to 10 V signal, linearly proportional to temperature. Programmable voltage reference is provided for internal self test and automated user calibration functions. Each channel can be configured for use with any...

RF Test System coordinates components.

Brainlink(TM) software and Series SC 1000 system controller connects and coordinates multiple pieces of RF test equipment, including 4 amplifiers, 4 antennas, 3 signal generators, 4 directional couplers, and spectrum analyzers or receivers. System enables range of emissions and susceptibility tests to be conducted without manually changing cable feeds or equipment settings. It automatically...

Amplifier conditions strain gages and load cells.

MCR-Strain Gage amplifier supports strain gages/load cells with resistances from 120 to 20,000 ohms. It includes 1000 V, 3-way galvanic isolation between power supply, input, and output circuits. Module filters and conditions signals to eliminate unwanted signal noise with DIP switch selectable cutoff frequencies of 30 or 5000 Hz. Outputs are provided for voltage (0 to 10, +/-10, 0 to 5, or +/-5...

Amplifier powers two channels.

Model 439 Two-Channel Attenuator-Amplifier has gain range of 118 dB in one dB steps from -78 to +40 dB. Gain is set by front panel rotary encoder and displayed on LCD. Each channel's gain can be set independently or they can be set together. Power amplifier is included to drive stereo headphone for audiometric testing or other use. Clock noise is eliminated by putting microprocessor into sleep...

Stainless Steel Baskets For Medical and Pharmaceutical Applications

This white paper provides an in-depth overview into stainless steel baskets for medical and pharmaceutical applications.

High-Voltage Amplifier suits piezo drives and instrumentation.

MA17 monolithic op amp, with high-voltage operation of 240 V, provides 17 channels of precision voltage, for driving capacitive loads. Housed in 100-pin Quad Flat Pack (QFP), it has quiescent current under 100 microA per channel, and foot print measuring less than 1.86 sq in. Applications include systems with multiple high-voltage drive channels, such as 3D MEMS mirror arrays, industrial ink jet...

Multi-Channel Amplifier outputs high voltages.

Dual Channel MA01 delivers up to 330 V, at peak output currents of 120 mA per channel, for loads such as MEMS-based optical switching, piezo positioning systems, ink jet printers, electrostatic deflection and push-pull applications. Precision, monolithic IC provides power bandwidth of 26 Khz at full output voltage. Each channel can operate independently or both channels can be bridged for 660 V...

Amplifier/Conditioner offers side load rejection.

System combines SW0 (universal/tension or compression) and TM0-2 (stand alone bench top amplifier/conditioner), and is suitable for industrial and OEM force measurement and weighing applications. TM0-2 provides excitation, balance, and span adjustment via precision 10 turn pots and shunt calibration. SW0 load cell is offered in ranges from 1,000 to 50,000 lbs.

Preamplifier uses avalanche photodiodes.

C30659-Series includes low noise Gasfet front end, avalanche photodiodes, and hybrid preamplifier in single modified 12-lead TO-8 package. Avalanche photodiodes can be either silicon or indium gallium arsenide and emitter follower is used as output buffer stage. It has strong response between 400 and 1700 nanometers. To obtain wideband characteristics, output of preamp should be ac coupled to...

Transducer Amplifier for load cells and pressure sensors.

CMJ-CEB has bi-polar output of Ã-

Microwave Preamp covers wide bandwidth.

LN1G11 Low Noise preamp covers bandwidth of 1.0 to 11.0 GHz, has minimum gain of 27dB, and is suitable for amplifying low-level signals to drive power amplifiers. With its low noise, it can also be used to increase sensitivity of EMC receivers that have relatively high noise figures. It comes with benchtop cabinet and front or rear connectors. Other preamplifiers are available with frequencies...

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.