New Amplifiers Products

Error Amplifier suits power conversion applications.

Model FOD2742 Optically Isolated Error Amplifier features tolerance as low as 0.5%. It incorporates optocoupler, precision reference, and error amplifier into 8-pin SOIC package. Unit provides isolated voltage feedback between secondary and primary sides of power conversion circuits for control and regulation purposes. Reference voltage tolerances include 0.5, 1, and 2%. Model FOD2742 has UL,...

Traveling Wave Tube Amplifiers deliver up to 300 W.

Model 300T2G8, ranging from 2.5-7.5 GHz, provides 300 W minimum at amplifier output connector. Model 250T1G3, ranging from 1-2.5 GHz, and Model 250T8G18, ranging from 7.5-18 GHz, each deliver 250 W. All are self-contained, forced air-cooled broadband TWTAs suitable for applications that require instantaneous bandwidth and high gain. They provide power needed to ensure desired 200 V/m level for...

Rail-to-Rail Op Amps provide low noise, 0.95nV/rtHz operation.

Model LT6200-10 features 1.6 GHz gain bandwidth product, 450 V/Ã-µs slew rate, and is stable at gains of 10 or higher. Model LT6200-5 features 800 MHz gain bandwidth product, 250 V/Ã-µs slew rate, and is stable at gains of 5 or higher. Operating on single or split supplies from 2.5-12.6 V total, units feature shutdown pin that reduces supply current to

Fixed Gain Amplifier has differential inputs/outputs.

Available in 8-pin MSOP package, fully differential LTC1992-2 has high-stability internal gain setting resistors that provide fixed gain of 2 with better than Ã-

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Optical Distribution Amplifiers handle video/audio/data signals.

Pure Digital FiberlinkÃ-® 8000 and 8100 Series transmit 1-4 and 2-12 channels, respectively, of any combination of video, audio, and data signals from one-way Pure Digital Fiberlink Transmitters. They transmit to multiple one-way Pure Digital Fiberlink Receivers without degradation to quality of original baseband signals. Both series can receive signals over multimode or single mode fiber at...

CMOS Amplifiers suit low power applications.

Models LMV321, LMV358, and LMV324 are single, dual, and quad amplifiers, respectively. They consume supply current of 120 microamps max at 2.7 V and typically 100 microamps at 5 V. Units provide rail-to-rail output and offer supply voltage of 2.5-5.5 V. With gain bandwidth of 1.4 MHz at 5 V and slew rate of 1.5 V/microsecond at 5 V, amplifiers are suitable for portable applications such as...

Amplifier and Transponder simplify network installation.

Model A1070 Erbium Doped Fiber Amplifier consists of variable gain line amplifier with up to 25 db of gain and automatic transient suppression, which minimizes transmission penalties as channels are added/dropped in network. Supporting up to 40 channels at full gain, unit is managed through local serial port, Telnet, or SNMP. Optical transponder A1010 offers 640 km Dense Wavelength Division...

Sensor Amplifiers are DIN rail mounted.

Sensor Amplifiers offer hi-level output signals, ready for long cable runs and/or direct interface to common PLC interface cards. They provide controlled power to associated sensor and condition sensor's return signal before providing it to output terminals. Relay buffered shunt calibration circuit offers simplified calibration, set-up, and real time circuit verification. Outputs include Ã-

Preamplifier drives computer sound-card line input.

Model 421 High-Performance Stereo Microphone Preamp features 2 identical, differential input stages that use compound transistor pairs with circuit resistance values computer-optimized for very low output noise. Dynamic range is nearly 70 dB at full gain of 60 dB. Internal rechargeable batteries provide complete isolation from power mains, and cast-aluminum enclosure minimizes pickup of unwanted...

Amplifier provides signal gains of 35 dBm.

Single-Channel C-Band Erbium Doped Fiber Amplifier comes as cooled or coolerless gain block with integrated control electronics that includes laser and TEC driver circuit with alarms and monitors. Amplifier is capable of signal gains up to 35 dBm with noise of less than 4.5 dB and total output power of +10 dBm. Assembly, electrical interface, and included software bundle measures 90 x 70 x 12 mm.

Increase Workplace Safety, Manage Heavy Loads with Equipment from A-Plus Warehouse

A-Plus Warehouse carries a wide selection of commercial and industrial material handling equipment at affordable prices. Check out the video to learn more.