New Amplifiers Products

Multi-Carrier Power Amplifier is designed for AWS band.

Intended for wireless operators and base station vendors in US 3G market, 3G MCPA is available in 25 and 50 W models and is compatible with HSDPA and 1xEVDO standards. Unit enables amplification and integration of multiple carrier signals into single antenna on base stations, removing need for multiple antennas and boosting transmission efficiency.

Bang & Olufsen Incorporates Cutting Edge Sound System into the New Audi R8

Providing a Second Completely Customized Sound System for the Elite Audi Line, Evoking Sleek Designs and Superior Performance ARLINGTON HEIGHTS, Ill., Oct. 11 // -- Bang & Olufsen, the world wide provider of exclusive, high quality audio and video products, proudly introduces its second custom-made audio system for Audi Corporation, in its special debut of the new Audi R8 sports car. Since 2005,...

Video Amplifier suits FTTH triplexers.

Designed to amplify incoming signals in fiber-to-the-home analog video networking applications, TAT6254 Single Family Unit Video Receiver/Amplifier integrates trans-impedance amplification and post amplification on single chip and operates on single 12 V supply. It delivers automatic gain control to maintain constant 21 dBmV/channel output from -8 to +2 dBm. Unit features high gain levels over 32...

Power Amplifiers optimize speaker performance.

Rated at 400 and 900 W, Evolution 403 and 900 are 3-channel and monaural amplifiers with Current Audio Signal Transmission circuitry and current gain topologies that allow signal to remain in current domain from input to output. This avoids unnecessary current to voltage conversions that add distortion and limit bandwidth. Both utilize 6,000 VA power supply that makes use of electrical and...

Common Misconceptions About Custom Automation Systems

This guide will help you understand the capabilities of automation systems.

STMicroelectronics Completes Full Portfolio of IP for Mobile Hard-Disk-Drive Manufacturers

Offers full kit of System-on-Chip, pre-amplifier, and motor controller IP for small form-factor hard-disk drives used in laptops and portable consumer applications Geneva, October 3, 2006 - STMicroelectronics (NYSE: STM), a world leader in hard disk drive (HDD) and system-on-chip solutions, today announced completion of its portfolio of IP (Intellectual Property) required to design, manufacture,...

Video Amplifier supports 1080p high definition format.

Available in 3 x 3 mm QFN package, Model LT6559 triple amplifier features 150 MHz 0.1 dB flatness bandwidth, 800 V/Ã-µs slew rate, and wide output swing of 1.15-3.85 V on single 5 V supply. Unit includes separate enable pins for each channel. When enabled, amplifier draws 3.9 mA and when disabled, current consumption drops to 0.1 Ã-µA. Applications include video-playback equipment, KVM...

Buffer Repeaters offer low-jitter and on-chip termination.

With only 14 psec jitter at 1.5 Gbps data rate and offering 15 kV ESD protection, Models DS15BR400 and DS15BR401 are suited for designing LVDS multi-cards or multi-boxes. Offered in 32-pin LLPÃ-® and 48-pin TQFP packages, buffer-repeaters operate from 0-2.0 Gbps and drive up to 4 LVDS clock/data channels over common backplanes or cable configurations. Differential input range interfaces to...

Audio Op Amp drops distortion rate to 0.00003%.

Suited for high-end professional audio applications, Model LM4562 combines 6 MHz unity-gain bandwidth operational amplifier with stereo audio power amplifier. Op amp features low input noise density of 2.7 nV/√Hz at 217 Hz, 1/f noise corner of 60 Hz, and 600 W output drive. Available in 8-lead SOIC dual in-line package, Model LM4562 has slew rate of 20 V/Ã-µs, 56 MHz gain bandwidth, and...

Driver Amplifier is used in wireless applications.

Utilized in WiMAX, WiBro, and UMTS/WCDMA base stations, Model MAAMSS0071 single-stage driver amplifier is fabricated using GaAs HBT process. Product features gain blocks with output of P1dB levels of +26 dBm and gain of 16 dB at 2,140 MHz. Housed in lead-free, RoHS compliant SOT-89 plastic package, amplifier offers 500-2,500 MHz bandwidth, which can be optimized for specific frequency range with...

Power Amplifier suits 802.16 WiMAX Base Station applications.

Model ZPA3436-5W amplifier operates over 3.4-3.6 GHz band with typical gain of 46 dB and 37 dBm OFDM output power for 64 QAM, 3/4 Coding, 3.5 MHz channel bandwidth, and 256 carriers. Biased at 28 V, high linearity power amplifier achieves EVM performance of 2% at 37 dBm linear output power, and draws 3.5 A dc current. Design is lead free and SMA connectorized package measures 9 x 4 x 1.5 in....

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.