New Amplifiers Products

Audio Amplifiers come in 0.4 mm-pitch micro SMD package.

Measuring 1.2 x 1.2 mm, LM4941 1.25 W fully differential, BoomerÃ-® Class AB audio amp integrates RF suppression circuitry to prevent output from picking up noise and injecting it back into signal path. It rejects common-mode noise and offers quiescent current of 1.7 mA at 5 V supply. Used as capacitive-coupled or output capacitor-less device, LM4985 stereo headphone, BoomerÃ-® Class AB...

Operational Amplifier is used in single-supply applications.

With single-supply operation from 2.2-5.5 V, OPA365 operational amplifier utilizes zero-crossover, single-input stage architecture to achieve rail-to-rail performance. Features include distortion of 0.0006% THD+N, noise of 4.5 nV/rtHz, bandwidth of 50 MHz, and settling time of 300 ns to 0.01%. Delivering CMRR of 100 dB minimum and 120 dB typical over entire input range, product design makes it...

Instrumentation Amplifiers achieve bandwidth up to 12 MHz.

Available in 10-lead MSOP packages, digitally programmable Models AD8250 and AD8251 draw 3.5 mA, making them suitable for test, control, and high-speed data acquisition systems. Units operate with Ã-

RF Amplifiers offer repeatable gain performance.

JCA series includes over 12 models with Ã-

Speciality Heat Exchangers 101: Considerations for Choosing the Right One for Your Application

Specialty heat exchangers play an important role in a wide variety of industrial applications, and it's crucial to select the correct device for your application. Check out this guide and learn how to choose the right heat exchanger.

ANADIGICS Announces Production Shipments of Dual-Band Power Amplifiers for LG Electronics EV-DO Chocolate Phone

Ultra-Thin LG Electronics Chocolate Phone Relies on Compact Design of ANADIGICS' AWT6310 Power Amplifiers WARREN, N.J., Aug. 3 // -- ANADIGICS, Inc. (NASDAQ:ANAD), a leading supplier of wireless and broadband solutions, today announced that the Company is shipping production volumes of its new generation of dual-band EV-DO power amplifiers (PAs) to LG Electronics for its Chocolate phone. The...

HDD Preamplifiers lower power demand in portable devices.

Designed for drives with less than 2.5 in. diameter platters, Near Zero Power (NZP) series model L6440 has total Write-Mode power consumption of 170 mW at 450 Mbps data rate and supports max data rate of 600 Mbps. Hard disk drive (HDD) preamplifiers reduce overall power requirements by remaining in sleep mode even most of the time end-product is operating. Fast Sleep Mode combines 250 Ã-µW...

Disk Drive Preamplifiers target portable products.

Intended specifically for drives with less than 2.5 in. diameter platters, Near Zero Power Model L6440 consumes 170 mW and supports max data rate up to 600 Mbps. Combining 250 Ã-µW sleep power with 500 ns Sleep-to-Read recovery time, Fast Sleep Mode allows preamplifier to remain in sleep mode most time end product is operating. Four-channel Model L6440 and 2-channel L6420 accommodate both...

Wideband Amplifiers are designed for microwave applications.

Providing alternative to distributed amplifiers for applications requiring frequencies extending through X and Ku bands, SUF series E-Mode pHEMT wideband amplifiers operate directly off single +3.3 or +5.0 V supply voltage, and employ 50 W broadband match. MMIC Darlington amplifiers include 5 models, SUF-1000 to SUF 5000, offering from DC-20 GHz to 0.10-10 GHz and 10-19 dB of gain.

Power Amplifier suits audio electronics applications.

Supplied in SMT package, Class-D TB2924FG is based on bipolar, CMOS and double-diffused metal oxide semiconductor technology. It operates up to 21 W x 2 bridge-tied load (BTL) amplifier channels and offers 88% typ efficiency without heat sink for up to 10.5 W x 2 BTL amplifier channels. Single power supply design has operating voltage of 11.4-20 V at 8 W at temperatures from -20 to +75Ã-

Amplifier captures and holds signals and pulses.

Providing stand-alone Sample-Hold solution, Model SHM-50 features signal bandwidth of 70 MHz and is available in through-hole or surface-mount, 8-pin mini-DIP package. Complete sample-hold circuit contains precision MOS hold capacitor and feed-through attenuation of -78 dB. FED input amplifier design allows acquisition time of 40 ns for 2 V step to Ã-

Aerzen USA Process Gas Blower and Compressor Installations Worldwide

Aerzen is firmly established as a global leader in compressed air, gas, and vacuum solutions. Our reputation as an industry leader is built on consistently delivering innovative products that are at the cutting edge of technology. To learn about the industries finest blowers and oil-free and oil-injected screw compressors, see our video.