Press Release Summary:
Used in applications requiring bond strengths up to 4,770 psi, 2-part, ceramic-filled Aremco-Bond(TM) 2310 is gray-pigmented, 100% solids epoxy adhesive with flexural strength of 12,000 psi, volume resistivity of 3.0 x 1013, dielectric strength of 410 V/mil, and dielectric constant of 4.28 at 1 kHz. Cured product exhibits linear shrinkage of .001 in./in. and Shore-D hardness of 78. Recommended cure is 2 hours at 150Â°F or 48 hr at room temperature.
Original Press Release:
Aremco-Bond 2310 Ultra High Strength Adhesive Now Available
Valley Cottage, NY - November 3, 2006
Aremco-Bond(TM) 2310, a new ultra high strength, flexible, high temperature epoxy adhesive produced by Aremco Products, Inc., is now available for applications requiring a tensile shear strength to 4,770 psi and operating temperatures to 325°F (165°C).
Aremco-Bond(TM) 2310 is a two-part, gray-pigmented, medium viscosity, flexible, epoxy adhesive used in applications requiring ultra high bond strengths up to 4,770 psi and temperature resistance to 365°F (185°C). This adhesive is ceramic-filled an exceptional combination of high shear and peel strengths. It also provides excellent impact and vibration resistance and good stability in autoclave conditions.
Additional properties include a high flexural strength of 12,000 psi, volume resistivity of 3.0 x 1013, dielectric strength of 410 volts/mil, and dielectric constant of 4.28 at 1 kHz. Exceptional chemical resistance to acids, alkalis, organic fluids, and salts, is also provided.
Aremco-Bond(TM) 2310 is a 100% solids epoxy that is mixed in a ratio of 100 parts resin to 100 parts hardener by weight. Mixed viscosity is 38,000 centipoise (cP) and the pot life for a 100 gram mass is approximately 45 minutes. Recommended cure is 2 hours at 150°F or 48 hours at room temperature. Cured product is exhibits a linear shrinkage of .001 in/in and Shore-D hardness of 78.
Some of the many applications for Aremco-Bond(TM) 2310 include the bonding of engineered thermoplastics, ceramic wear tiles and sheet molding compounds used in aeropace and automotive applications. Aremco-Bond(TM) 2310 is supplied from stock in easy to mix pint, quart and gallon kits.
Please contact Aremco's Technical Sales Department for more information about this advanced product.
Contact: Peter Schwartz
TEL: (845) 268-0039
FAX: (845) 268-0041