Share:
Hydraulic Excavator works in space-restricted areas.
Tight-tail swing excavator, model PC308USLC-3, weighs in at 73,146 lbs and offers 59,180 lbs of drawbar pull and steering force. When equipped with 33.5 in. shoes, 179 hp machine occupies 10 ft 9 in. width, and 17,857 lb counterweight protrudes 1 ft 5 in. past track shoes. Product offers max ISO-rated digging force of 44,530 lbs and arm crowd force to 33,290 lbs. Max digging height is 33 ft 8...
Read More »Wheeled Dozer offers compaction and maneuverability.
Rubber-tired Model WD600-3 pushes with 485 flywheel hp at 2,000 rpm and offers maximum rim-pull up to 94,300 lb. It features Tier 2 compliant SAA6D170E-3 engine and fully automatic shift transmission. Fully hydraulic, wet-disc braking system is completely sealed to lock out contaminants. A 10 cu yd straight blade is standard. Dozer is suited for mining, coal stockpile, woodchip, and general...
Read More »Crawler Dozers feature hydrostatic steering system.
Models D65EX/PXIWX-15 and D85EXIPX-15 are mid-sized crawler dozers equipped with Tier II compliant SA6125E-3 engine. D65 operates with 190 hp at 1,950 rpm, while D85 pushes with 240 hp at 9,000 rpm. Blade capacities range from 4.8-7.34 ydÃ-³ for D65 and 6.8-9.2 ydÃ-³ for D85. Powered by independent hydraulic pump with engine power transmitted to both tracks, outside track is allowed to...
Read More »Skid Steer has rated operating load of 2,000 lbs.
Equipped with proprietary Automatic Power Control and HydrauMind(TM) hydraulics, 7,525 lb SK1020-5 incorporates 2-speed, shift-on-the-go transmission with working speed of 6.5 mph and travel speed of 10 mph. Available with choice of 2 diesel engines, product offers Closed Load Sensing System and rated tipping load of 4,000 lbs. Bucket width equals 74 in., and overall machine length is 139.5 in....
Read More »Crawler Dozers feature hydrostatic steering system.
Models D65EX/PXIWX-15 and D85EXIPX-15 are mid-sized crawler dozers equipped with Tier II compliant SA6125E-3 engine. D65 operates with 190 hp at 1,950 rpm, while D85 pushes with 240 hp at 9,000 rpm. Blade capacities range from 4.8-7.34 yd3 for D65 and 6.8-9.2 yd3 for D85. Powered by independent hydraulic pump with engine power transmitted to both tracks, outside track is allowed to move faster...
Read More »Wheel Loader/Tool Carrier have hydrostatic transmission.
Powered by Tier 2 compliant SAA6D102E Komatsu engine, WA250-5 wheel loader incorporates transmission that allocates only as much power as needed for application at hand. Also included: pressurized cab that reduces noise levels to 70 db (A) and multi-function mono lever PPC hydraulic system. Tool carrier model WA250PT-5L, with parallel linkage design, includes same features as WA250-5, with...
Read More »Hydraulic Excavator offers high power and 4 working modes.
Model PC160LC-7 features 110 hp Turbocharged SAA4D102E-2 engine and 74 gal fuel tank. Equipment Managing Monitoring System monitors critical fluid levels and components. Active Mode provides maximum power, Economy Mode reduces fuel consumption by 25%, Lifting Mode increases hydraulic pressure by 7%, and Breaker Mode provides optimum engine rpm and hydraulic flow. Excavator is capable of lifting...
Read More »Mobile Impact Crusher offers production of up to 441 tons/hr.
Model BR480RG-1 is powered by 306 hp SAA6D125E-2 engine and equipped with KR1313 impact crusher. Rotor with variable speed drive enables processing volume and gradation to be adjusted quickly. Semi-auto feeder system adjusts feed if crusher becomes overloaded. Grizzly feeder with muck extraction uses upward slope feeder and 2-stage grizzly bar to remove muck and make it difficult for finer...
Read More »Excavator offers 5 arrangements to meet application.
Model PC1250-7 is a 251,000 lb hydraulic excavator with 651 hp engine featuring electronic controller and governor that complies with EPA Tier II air quality regulations. Open-center, load-sensing, and engine speed-sensing hydraulic system includes 4 variable capacity pumps. Equipment Management Monitoring System schedules maintenance and performs onboard diagnostics. Pressurized cab reduces...
Read More »Excavator minimizes required work space.
Designed primarily for work in confined zones, the 86 hp, 30,865 lb PC138USLC-2 near-zero-tail-swing excavator features patented HydrauMind(TM) hydraulic control system, ergonomically designed cab, and three working modes. Powered by turbocharged Komatsu S4D102E-1 four cylinder, water-cooled engine, the PC138USLC-2 features a 20,940 lb bucket digging force, and 13,890 lb arm force.
Read More »