Ridgid
Elyria, OH 44035
Cut-Off Machine handles difficult materials.
Equipped with 15 A, 120 V motor, and 14 in. abrasive wheel Model CM1450 cuts through 5 in. pipe, 2 in. bar stock, and full bundles of steel studs. It includes hardened cut steel gears, cast-aluminum motor housing, and cast-iron base with non-slip rubber feet. D-shaped handle offers control and comfort, and machine fence pivots up to 45Ã-
Read More »
Table Saw has vibration dampening cast iron construction.
Equipped with 1.5 hp TEFC motor that operates at speeds to 3,450 rpm, Model TS3650 features 40-tooth carbide-tipped blade and Herc-U-Lift(TM) caster system. Other features include machined-steel pulleys, poly-V-belt drive, and cabinet with oversized base. Saw has 36 in. right and 12 in. left rip capacities; front- and rear-locking, self-aligning rip fence with micro-adjust mechanism;...
Read More »
Band Saw cuts stock up to 6 in. thick.
Equipped with -¾ hp TEFC motor, Model BS1400 includes upper and lower, micro-adjust blade guides and tilting table that allows for 45-° right to 10-° left bevel cutting. Riser-block accessory increases stock-thickness capacity to 12 in. Heavy-duty construction includes cast-iron table and frame, cast aluminum, precision-balanced drive wheels, and steel wheel covers and leg stand. Unit includes...
Read More »
Drill Press is fitted with 1/2 hp TEFC induction motor.
Equipped with machined pulley, Poly-V-Belt drive, 15 in. Model DP1550 offers 12 speeds from 300-3,100 rpm. Chuck accepts drill bits from 1/32-5/8 in. dia and handles bits and hole saws. Unit's 7Ã-½ in. throat allows drilling to center of 15 in. wide workpiece, while 3Ã-¾ in. quill travel enables boring completely through 4 x 4 in one pass. Table tilts 90Ã-
Read More »
Cordless Drills include Rapid Max(TM) twin charger.
Available in 12, 14.4, and 18 V models, X2 series -½ in. cordless drills are equipped with 2-speed transmission for rates of 400/1,600 rpm or 450/1,600 rpm. With max torque levels from 365-485 lb-in., drills have auxiliary handles for increased control and handling. They come with 2 Max HC(TM) high capacity battery packs, 24-position clutch, and single-sleeve locking chuck with carbide jaws and...
Read More »Cordless Hammer Drill comes with 30 min battery charger.
Model R841151 X2, 18 V, Ã-½ in., Rear Handle Hammer Drill has 2-speed transmission (0-400/0-1600 rpm) and gearbox that permits hammering ranges of 0-6,400/0-25,600 bpm. Its 24-position clutch regulates torque output up to 485 lb-in. Unit comes with 2 Max HC(TM) battery packs and Rapid Max Twin(TM) charger. Metal, 2-sleeve locking chuck has carbide jaws and metal depth stop rod. Also included:...
Read More »
Sander offers two different modes.
Model EB4424 Oscillating Edge/Belt Spindle Sander features adjustable 0-48Ã-
Read More »
Thickness Planer has Sure-Cut(TM) lock for snipe control.
Powered by 15 A motor with overload protection, Model TP1300LS delivers 66 cuts/in. and has 13 x 6 in. cutting capacity. Ind-I-Cut(TM) system lets users measure cutting depth before each pass, and Repeat-A-Cut(TM) depth stops produce multiple boards of same thickness. Blade removal is facilitated via hook and magnet design. Unit also offers 12 x 14 in. infeed and outfeed tables, upper and lower...
Read More »
Variable Speed Orbital Jig Saw has 6.0 A motor.
Model R3120 includes die-cast gearbox for reduced vibration and auto-stop brushes. Variable speed dial (1,000-3,000 spm) with electronic feedback enables saw to maintain cutting speed. Saw has 5 orbital cut settings, adjustable base, and tool-less blade change capability. Dust blower clears dust away from cut direction. Tool comes with 3 bi-metal blades, vacuum adaptor, and anti-splintering inset.
Read More »
Orbit Sander utilizes 3 A permanent magnet motor.
Model R2600 5 in. Random Orbit Sander features electronic speed control ranging from 7,000-12,000 rpm, which provides feedback to maintain constant speed under any load. Soft start/pad brake system prevents surface damage on start-up and shut down. Micro Fiber(TM) hook and loop pad feature eliminates dust build-up. Sander includes 12 ft rubber power cord, which stays flexible in cold weather, and...
Read More »